Handlebars & Controls (3)

-€8.60

SW-MOTECH Brake Cylinder Guard — Rear, Black

Folded, laser-cut protector that prevents boot contact with the foot brake cylinder; includes mounting hardware and instructions.

€33.42 €42.02

-€7.74

SW-MOTECH Brake Reservoir Guard — Black, Rear

Compact guard protects the original brake reservoir from rock chips and prevents unwanted cover removal; includes mounting hardware and instructions.

€30.08 €37.82

-€8.60

SW-MOTECH Heel Guard — Left, black anodized

Protects boot from heat and moving parts; bike-specific fit; easy mounting; instructions and mounting material included.

€33.42 €42.02

-€85.27

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — FEULING PARTS 3000

Complete kit with eight cylinder studs and eight head bolts, plus moly assembly lubricant and thread sealant; precision J-formed threads reduce galling and help prevent gasket failure.

€331.60 €416.87

Cylinder Stud and Head Bolt Kit — Chromoly steel, black, kit

-€69.56

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — Chromoly steel, black, kit

Complete kit with eight heat-treated 8740 chromoly studs, eight polished head bolts, moly lubricant, and thread sealant; precision J-formed threads prevent galling.

€270.56 €340.12

-€30.70

FEULING OIL PUMP CORP. Cylinder Stud Kit — Chromoly steel

Precision J-form cylinder stud kit with eight studs, moly assembly lubricant, and thread sealant. Stock replacement and reusable; manufactured by ARP® in the USA.

€119.36 €150.06

-€28.46

FEULING OIL PUMP CORP. Cylinder Stud Kit — Chromoly steel, Chrome finish

High‑strength cylinder stud kit with precision J‑form threads. Includes eight studs, moly assembly lubricant and thread sealant; reusable and made in the USA.

€110.67 €139.13

-€33.91

FEULING OIL PUMP CORP. Rocker Arm Shaft Stud & Nut Kit — Black

Stud and nut kit that reinforces rocker arm shaft standoffs to help prevent cylinder head cracking.

€131.90 €165.81

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, flat black

Motocross-style, low-profile handlebar with internal wiring slots and a smooth, unknurled grip area. Made in the U.S.A.

€131.14 €164.86

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Gloss Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise,...

Simple, classic beater bar with a narrow, upright profile. Slotted for internal wiring, unknurled finish, and made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, 4-3/4" pullback, Flat Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic straight, narrow beater handlebar with internal wiring slot. No knurling. Made in the U.S.A.

€137.69 €173.10

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32" width, Black gloss

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32"...

Strip-style handlebar with slotted internal wiring and throttle-by-wire notch. Requires special risers and clamps. Made in the U.S.A.

€390.35 €490.73

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm...

Strip-style handlebar with smooth, unknurled finish. Slotted for internal wiring, notched for electronic throttle, and compatible with OEM heated grips. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise 33 cm (13"), Black gloss

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise...

Classic strip-style handlebar with polished welds, internal wiring routing, and electronic-throttle compatibility. Requires special risers and clamps; made in the U.S.A.

€409.83 €515.21

1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

Strip handlebar with polished welds, internal wiring slots, throttle-by-wire notch and pre-drilled ends; requires special risers and clamps. Works with OEM heated grips.

€307.16 €386.14

1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm width, Black gloss

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm...

Smooth strip handlebar with slotted wiring, throttle-by-wire notch, polished welds, and OEM heated-grip compatibility. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width, Black gloss

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width,...

Polished welds; slotted for internal wiring; notched for electronic throttle; accepts OEM heated grips; made in the U.S.A.; requires special risers and clamps.

€307.16 €386.14

1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

Strip-style handlebar with pre-drilled routing for internal wiring, notched for throttle-by-wire and compatible with OEM heated grips. Requires special risers and clamps.

€432.80 €544.08

1" T-Bar Handlebar — 24" width, 1" diameter, 6" rise, Black gloss

-€20.49

EMGO 1" T-Bar Handlebar — 24" width, 1" diameter, 6" rise, Black gloss

Classic 1" T-bar handlebar with smooth ends. Verify dimensions before ordering. Does not accept H-D OEM heated grips.

€46.97 €67.46

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp, 1/2-13 thread, Black gloss

-€50.74
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp,...

Billet aluminum clamp and riser kit with one-piece clamp; riser tapped for 1/2"-13 bolts. Made in the USA.

€197.38 €248.12

-€3.43
Out of Stock

SW-MOTECH 1" Ball — Black

Mounts to an existing ram arm. For GPS, camera and GoPro mounting.

€13.38 €16.81

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€312.43 €392.77

-€76.67
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — Thick-wall steel with polished welds, slotted for internal wiring; no knurling or electronic throttle control notch. Made in the U.S.A.

€298.17 €374.84

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — the 'Stripper' style bar used on many of Todd's Cycle customs; thick-wall steel, polished welds, slotted for internal wiring. Made in the U.S.A.

€312.43 €392.77

-€76.50
Out of Stock

TODD'S CYCLE [object Object]

Low‑profile 1" Strip Handlebar made from thick‑wall steel with polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€297.55 €374.05

-€72.86
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar: thick-wall steel with polished welds, slotted for internal wiring, no knurling or throttle-control notch; made in the U.S.A.

€283.33 €356.19

-€4.29
Out of Stock

SW-MOTECH Ram Extension — Ram arm, black

Extends Ram 1 inch ball systems with a second arm for improved positioning.

€16.72 €21.01

-€80.10
Out of Stock

TODD'S CYCLE [object Object]

Classic 1-1/4" Blackline Club Handlebar — mounts with stock hardware, slotted for internal wiring, made in the U.S.A.

€311.52 €391.62

Jack Hammer Grips — 1" handlebar, 5-1/4" length, black flat finish

-€1.20
Out of Stock

EMGO Jack Hammer Grips — 1" handlebar, 5-1/4" length, black flat...

Classic old-school look with ribs along the length for improved grip and control.

€3.40 €4.60

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls