Handlebars & Controls (3)

-€3.98

BILTWELL Torker Grips — 25.4 mm (1"), 12.7 cm (5"), chocolate

Injection-molded Krayton synthetic rubber grips with classic surface design; throttle sleeve not included.

€13.51 €17.49

Anthem Pro Adjustable Lever Set for Harley Models — Black, Polished, Brake & Clutch

-€61.37

PSR Anthem Pro Adjustable Lever Set for Harley Models — Black,...

Unbreakable folding lever set with micro-adjuster; shortens up to 1-1/2" for a custom reach.

€238.58 €299.95

Hymec Service Kit — Master Cylinder, 0722152

-€5.33

MAGURA Hymec Service Kit — Master Cylinder, 0722152

Service-Kit Hymec (Fill and Bleed Kit) for controlled filling and bleeding. Easy setup for routine maintenance.

€14.00 €19.33

1" Handlebar — 1" diameter, 31" width, 4-1/4" rise, Black

-€47.77

BILTWELL 1" Handlebar — 1" diameter, 31" width, 4-1/4" rise, Black

Seamless chromoly tubing with CNC mandrel bends and precision TIG-welded joints. For aftermarket/custom use; not notched for TBW applications.

€135.01 €182.78

-€53.12

BILTWELL 1" Handlebar — 31" width, 1" clamp

Seamless 4130 chromoly tubing with 1" OD x .120" (3 mm) wall. CNC mandrel bends reduce flat spots. Precision-mitered, TIG-welded joints. For aftermarket/custom applications. Not notched for TBW applications.

€150.11 €203.23

Murdock O/S Risers — 1-1/8" clamp, 12" rise, Chrome

-€96.89

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 12" rise, Chrome

Investment-cast one-piece bar clamp accepts 1-1/8" handlebars; 0.120" wall chromoly uprights, CNC mounting bases, 3.5" centers, 2" pullback; sold as a pair.

€161.42 €258.31

Murdock O/S Risers — 1-1/8" clamp, 14" rise, Chrome

-€99.51

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 14" rise, Chrome

Precision investment-cast one-piece clamp with mandrel-bent uprights for 2" pullback, CNC-matched bases, TIG welded and hand-polished. Sold as a pair.

€165.79 €265.30

Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 6" rise, Chrome

-€91.33
Out of Stock

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 6" rise, Chrome

Investment-cast one-piece clamp with mandrel-bent uprights for reduced reach; CNC bases fit most stock and aftermarket hardware.

€152.15 €243.48

Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 14" rise

-€102.46

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 14" rise

Investment-cast one-piece clamps with mandrel-bent uprights for two inches of rearward pullback; CNC bases and stainless hardware included.

€170.69 €273.15

Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 14" rise, Black Satin

-€96.89

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 14" rise,...

Investment-cast one-piece steel clamp for oversize handlebars
Mandrel-bent chromoly uprights for rearward offset
CNC-lathe-turned mounting bases accept stock and aftermarket hardware
Fits most stock and select aftermarket fork trees
TIG welded and hand polished; stainless-steel clamp hardware

€161.42 €258.31

-€84.85

BILTWELL 1" T-Bar — 1" diameter, 10" rise, 30" width, Black gloss

Precision-engineered 4130 chromoly T-bar with mandrel bends and precision-mitered, TIG-welded joints for a clean, durable finish.

€239.81 €324.66

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 12" center width

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete installation kit with matching braided cables, brake lines, and preloaded pull-thru sleeving for easier wiring and a factory look.

€651.84 €825.35

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") handlebar, 25.4 mm (1") clamp, chrome

On sale!
-€154.52

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and machined control mounts. Assembled in the U.S.A.

€580.50 €735.02

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 30.5 cm (12") center width, 25.4 mm (1") clamp

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking 1-1/4" handlebar kit with braided cables, preloaded pull-thru sleeving and all necessary hardware for fast installation.

€751.41 €951.42

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar installation kit with matching braided cables, brake lines, preloaded pull-thru sleeving and all required hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented internal routing design for easy full-harness installation and a clean routed look. Preloaded with E-Z pull-thru sleeving for fast wiring runs. CNC mandrel bends and machined control mounts for durable, high-quality fit and finish. Not compatible with stock risers or clamp/gauge mounts on 883C and 1200C models.

€331.15 €419.29

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1" center section, 1" clamp, chrome

Patented Viking handlebar with internal wiring routing for clean, easy installations.

€331.15 €419.29

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2" width

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2"...

Patented Viking internal design for easy wiring harness installation, preloaded with E-Z pull-thru sleeving; machined mounts and high-luster finish.

€329.50 €417.21

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center

Patented internal routing for easy wiring installations, preloaded E‑Z sleeve, CNC mandrel bends, machined mounts, high-luster finish.

€376.30 €473.06

-€100.66

BILTWELL 1" T-Bar — 1" diameter, 12" rise, 30-1/2" width, Chrome

Precision-mitered, TIG-welded T-bar made from seamless 4130 chromoly tubing; mandrel-bent to minimize flat spots.

€284.50 €385.16

-€60.97

BILTWELL Tracker O/S Handlebar — 30-1/2" width, 1-1/8" clamp, Black

Tracker O/S Handlebar with seamless 4130 chromoly construction, mandrel-formed bends, and TIG-welded joints for durable, precise control.

€172.32 €233.29

-€46.53

PSR Journey Adjustable Lever Set for Harley Models — Black

Adjustable lever set for fine bar-reach tuning; limited inward adjustment and CNC-machined construction for precise feel.

€75.34 €121.87

1" Handlebar — 28.5" width, 2" rise, 1" clamp, Black

-€53.12

BILTWELL 1" Handlebar — 28.5" width, 2" rise, 1" clamp, Black

Mandrel-bent, TIG-welded 1" chromoly handlebar built for aftermarket and custom applications.

€150.11 €203.23

1" Handlebar — 1" clamp, 28-1/2" width, Chrome

-€57.48

BILTWELL 1" Handlebar — 1" clamp, 28-1/2" width, Chrome

Durable 1" handlebar for aftermarket and custom builds, featuring seamless 4130 chromoly construction and precision TIG-welded joints.

€162.47 €219.95

1" Handlebar — 1" clamping diameter, 3" rise, 26" width

-€31.35

BILTWELL 1" Handlebar — 1" clamping diameter, 3" rise, 26" width

Seamless 4130 chromoly tubing, CNC mandrel bends, precision TIG-welded joints. For aftermarket/custom applications; not notched for TBW.

€88.60 €119.95

1" Handlebar — 25.4 mm (1"), rise 11 cm (4-1/4"), width 78.5 cm (31")

-€53.12

BILTWELL 1" Handlebar — 25.4 mm (1"), rise 11 cm (4-1/4"), width 78.5...

1" OD x .120" wall seamless 4130 chromoly handlebar with CNC mandrel bends and precision TIG-welded joints, for aftermarket/custom use; not notched for TBW.

€150.11 €203.23

1" Handlebar — 1" clamping, 31" width, 4-1/4" rise

-€58.46

BILTWELL 1" Handlebar — 1" clamping, 31" width, 4-1/4" rise

Seamless 4130 chromoly with CNC mandrel bends and TIG-welded joints. For aftermarket/custom use; not notched for TBW.

€165.22 €223.68

1" T-Bar — 1" diameter, 20" width, 9.5" rise, Black gloss

-€66.31

BILTWELL 1" T-Bar — 1" diameter, 20" width, 9.5" rise, Black gloss

Seamless 4130 chromoly handlebar with mandrel-bent bends and precision TIG-welded joints.

€187.41 €253.72

1" T-Bar — 25.4 mm (1") diameter, 62.5 cm (24-5/8") width, 20.5 cm (8") rise, Black

-€66.31

BILTWELL 1" T-Bar — 25.4 mm (1") diameter, 62.5 cm (24-5/8") width,...

Precision CNC mandrel bends and TIG-welded joints for dependable performance.

€187.41 €253.72

1" T-Bar — 1" diameter, 8" rise, 30-1/2" width, black

-€70.55

BILTWELL 1" T-Bar — 1" diameter, 8" rise, 30-1/2" width, black

Seamless 4130 chromoly construction with mandrel bends and precision TIG-welded joints for reliable strength.

€199.40 €269.95

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls