Handlebars & Controls (3)

1" Strip Handlebar — 25.4 mm clamp, 84.5 cm width (33-1/4"), 17" rise, Black gloss

-€76.50

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 84.5 cm width (33-1/4"),...

Strip-style 1" handlebar in thick-wall steel, polished welds, slotted for internal wiring, pre-drilled and unknurled.

€297.55 €374.05

-€72.86

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 84.5 cm (33-1/4") width

The "Stripper" handlebar features thick-wall steel construction, polished welds, slotted routing for internal wiring, and no knurling.

€283.33 €356.19

1-1/4" Blackline Club Handlebar — 32 mm (1-1/4") diameter, 28" (71 cm) width, 8-1/2" (21.5 cm) rise, Black

-€80.10

TODD'S CYCLE 1-1/4" Blackline Club Handlebar — 32 mm (1-1/4") diameter, 28"...

Mounts with stock hardware; slotted for internal wiring; made in the U.S.A.

€311.52 €391.62

-€45.80

ACCUTRONIX Custom Grips — 25.4 mm (1") , Chrome, Pair

Dual cable design. Made in the USA.

€178.10 €223.90

-€36.50

ACCUTRONIX Custom Grips — 25.4 mm (1") , Chrome

Dual cable design for reliable control. Made in the USA.

€141.94 €178.44

-€36.50

ACCUTRONIX Custom Grips — 25.4 mm (1"), Chrome

Dual cable design for reliable performance.

Made in the USA for consistent quality.

Clean, snag-reducing end design for a classic look.

€141.94 €178.44

Patriot Series Pivoting Handlebar Risers — 50.8 mm (2"), 25.4 mm (1"), Machined

-€32.03

ROX SPEED FX Patriot Series Pivoting Handlebar Risers — 50.8 mm (2"), 25.4...

Patented pivoting risers for V‑Twins with 1" handlebars. Adjustable forward/back positioning, easy installation, made in the USA. Verify cable and brake line length before installing.

€90.51 €122.54

Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4") clamping, 1/2-13 thread, 25.4 mm (1") rise, Black Gloss

-€50.74

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4")...

Precision-machined Bone Bar clamp and riser kit with one-piece riser clamp and tapped riser for 1/2"-13 bolts; made in the USA.

€197.38 €248.12

-€76.26

TODD'S CYCLE 1" Strip Handlebar — 1" clamp, 29-1/2" width, 14" rise

Classic Strip handlebar with a smooth, pre-drilled design and polished welds; slotted for internal wiring and made in the U.S.A.

€296.60 €372.86

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" diameter, 14" rise, 29" width

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; preserves clear sightlines to stock mirrors; made in the U.S.A.

€346.41 €435.48

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1" clamp, 13" rise, chrome

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1"...

Designed for batwing fairings; notched for throttle-by-wire; laser-cut wiring slots; fits factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13" rise, 36-1/2" width

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13"...

Notched for throttle-by-wire; large laser-cut, burr-free wiring slots; designed for batwing fairings; allows factory heated grips and stock controls; made in the U.S.A.

€363.73 €457.25

$1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm (1\") clamp, 30\" (76 cm) width$

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm...

Polished-weld strip handlebar with slotted wiring, hydraulic clutch compatibility, and heated-grip support.

€338.66 €425.74

1-1/4" Strip Handlebar — 1-1/4" clamp, 32" width, 12" rise

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" clamp, 32" width, 12" rise

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutches, works with heated grips, maintains clear sightlines to stock mirrors. Made in the U.S.A.

€338.66 €425.74

$1-1/4\" Strip Handlebar — 32 mm clamping diameter, 78.5 cm (31\") wide, Chrome$

-€89.25

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamping diameter, 78.5 cm...

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips.

€347.13 €436.38

Elite Custom Billet Aluminum Risers — 1" clamp, 4" rise, fits FXSTS Triple Trees, black anodized

-€56.91

ACCUTRONIX Elite Custom Billet Aluminum Risers — 1" clamp, 4" rise, fits...

Chrome billet aluminum risers with removable cover to hide upper clamp bolts; handlebar clamp bolts included; made in the USA.

€221.31 €278.22

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" diameter, 29-1/2" width, Chrome

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutch, works with heated grips, made in the U.S.A.

€347.13 €436.38

1-1/4" Strip Handlebar — 32 mm (1-1/4") clamping, 81.5 cm (32") width, 30.5 cm (12") rise

-€89.25

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") clamping, 81.5 cm...

Minimal strip-style handlebar with polished welds and flat finish. Slotted for internal or external wiring; pre-drilled for accessories. Compatible with heated grips and hydraulic clutch. Made in the U.S.A.

€347.13 €436.38

Knurled Diamond Custom Grips — 1" handlebar, throttle-by-wire compatible, anodized black

-€45.80

ACCUTRONIX Knurled Diamond Custom Grips — 1" handlebar, throttle-by-wire...

Precision-machined diamond-pattern grips with easy-install left three-screw clamp and right-side throttle sleeve included.

€178.10 €223.90

Knurled Diamond Custom Grips — 25.4 mm (1") handlebar diameter, Chrome

-€45.80

ACCUTRONIX Knurled Diamond Custom Grips — 25.4 mm (1") handlebar...

Extra-hard diamond knurling with precision-machined 6061-T6 billet aluminum construction and a high-quality chrome finish. Left side secures with three screws; right side includes a preinstalled throttle sleeve. Made in the USA.

€178.10 €223.90

1-1/4" Strip Handlebar — 32 mm (1-1/4"), 85 cm (33-1/2"), 35.5 cm (14"), Black Gloss

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4"), 85 cm (33-1/2"), 35.5...

Polished, pre-drilled strip handlebar slotted for internal or external wiring and compatible with hydraulic clutches.

€338.66 €425.74

1-1/4" Strip Handlebar — 32 mm (1-1/4") clamp, 85 cm (33-1/2") width, flat black

-€89.07
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") clamp, 85 cm (33-1/2")...

Minimal strip handlebar with polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips.

€346.41 €435.48

Master Cylinder Cover with Milled Lines — Black anodized, front mount, aluminum

-€10.87

ACCUTRONIX Master Cylinder Cover with Milled Lines — Black anodized,...

Milled line cover that upgrades appearance and long-term reliability.

€42.30 €53.17

-€10.87

ACCUTRONIX Master Cylinder Cover with Milled Lines — Chrome, Front

Subtle milled-line styling for a refined, finished appearance. Made in the USA.

€42.30 €53.17

1-1/4" Strip Handlebar — 1-1/4" (32 mm) diameter, 29-1/2" (75 cm) width, 14" (35.5 cm) rise

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" (32 mm) diameter, 29-1/2" (75...

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutches, works with heated grips, made in the U.S.A.

€346.41 €435.48

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 30" width, 10" rise

-€87.41

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 30" width, 10" rise

Knurled touring handlebar that fits OEM risers and clamps, installs without removing the stock clamp pin, and works with hydraulic clutches.

€339.94 €427.35

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 30" (76 cm) wide

-€80.67

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 30" (76 cm) wide

Knurled clamping area for secure fit
Made in the U.S.A.
Works with OEM riser and clamps; correct wire exit location
No need to remove stock mount pin; ample adjustability
Compatible with hydraulic clutches and accepts heated grips

€313.72 €394.39

1-1/4" Touring Handlebar — 1-1/4" clamp, 12" rise, 31" width, chrome

-€91.12

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 12" rise, 31" width,...

1-1/4" diameter clamp, knurled center, OEM fitment, >35° adjustment, works with hydraulic clutches.

€354.35 €445.47

1-1/4" Touring Handlebar — 32 mm (1-1/4") clamping diameter, 23 cm (9") center width, Chrome

-€95.67
Out of Stock

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4") clamping diameter,...

Knurled center, adjustable ape-hanger handlebar compatible with OEM risers and hydraulic clutches; accepts heated grips and features internal wiring and throttle-by-wire notch.

€372.08 €467.75

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 23 cm (9"), 35.5 cm (14")

-€89.08

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 23 cm (9"), 35.5 cm...

Ape hanger touring handlebar with knurled clamping area; fits OEM riser and clamps, offers 35°+ adjustment, works with hydraulic clutches.

€346.43 €435.51

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls