Handlebars & Controls (3)

Level Cup™ XL with Small Tough-Claw™ — XL, clamp, black flat

-€13.00

RAM MOUNTS Level Cup™ XL with Small Tough-Claw™ — XL, clamp, black flat

High-strength composite holder for oversized insulated cups and bottles; oversized opening with adjustable base and flexible rubber feet; tool-less Tough-Claw™ clamps to rails or flat surfaces; fits widths 2.6"–3-1/2" and heights 3-3/4"–11".

€50.56 €63.56

Small Tough-Claw™ Base with Long Double-Socket Arm and Universal Ram® X-Grip® — Clamp mount, universal cradle

-€19.34

RAM MOUNTS Small Tough-Claw™ Base with Long Double-Socket Arm and...

Universal spring-loaded X-Grip® cradle with Tough-Claw™ clamp base and long double-socket arm for large phones and phablets. Tool-less installation, device tether included. Verify device dimensions with case.

€75.22 €94.56

Tough-Charge™ Waterproof Wireless Charging Mount — Black, flat finish, ball mount

-€28.60

RAM MOUNTS Tough-Charge™ Waterproof Wireless Charging Mount — Black, flat...

Waterproof wireless charging mount with spring-loaded X-shaped grip and Qi charging. Includes 1 in B-size rubber ball; fits devices 2.375–3.25 in wide, up to 0.875 in deep. Safety tether included.

€84.39 €112.99

Tough-Charge™ Waterproof Wireless Charging Mount — Black, flat finish, X-Grip®

-€41.84

RAM MOUNTS Tough-Charge™ Waterproof Wireless Charging Mount — Black, flat...

Powdercoated marine-grade aluminum mount with spring-loaded X-Grip® and Qi wireless charging. Fits devices 2.375"–3.25" wide, up to 0.875" deep. Includes 1" B-size ball and safety tether.

€123.43 €165.27

Tough-Charge™ Waterproof Wireless Charging Mount — Black, flat finish, suction cup

-€36.38

RAM MOUNTS Tough-Charge™ Waterproof Wireless Charging Mount — Black, flat...

Powdercoated marine-grade aluminum X-Grip® mount with waterproof Qi wireless charging; fits phones 2.375"–3.25" wide.

€107.30 €143.68

-€82.93

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4"), 78.5 cm (31")

Polished welds and slotted wiring for a clean installation. Compatible with hydraulic clutch and heated grips. Made in the U.S.A.

€322.51 €405.44

-€7.00

CIRO Aluminum Clamp Kit — 19 mm (3/4"), Chrome

Heat-treated clamp kit with a clean single-bolt attachment. Compatible with phone, drink and camera mounts.

€27.23 €34.23

Tab-Tite™ Spring Loaded Holder — 7"-8" tablets, Black

-€5.97

RAM MOUNTS Tab-Tite™ Spring Loaded Holder — 7"-8" tablets, Black

Spring-loaded tablet cradle for 7"-8" devices; compatible with B and C size RAM® round ball bases. Interchangeable end cups enable easy upgrades.

€23.24 €29.21

Passenger Phone Mount — Tour-Pak, Black flat

-€14.52

CIRO Passenger Phone Mount — Tour-Pak, Black flat

Quick-detach all-metal swing-away passenger phone mount; reversible for left or right. Speaker pods required. Phone holder sold separately.

€56.49 €71.01

1-1/4" Strip Handlebar — Clamping diameter 32 mm (1-1/4"), Rise 35.5 cm (14")

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — Clamping diameter 32 mm (1-1/4"),...

Strip-style handlebar with polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips.

€338.66 €425.74

Tough-Claw™ Mount with Level Cup™ Drink Holder — Black, flat finish, clamp

-€9.50

RAM MOUNTS Tough-Claw™ Mount with Level Cup™ Drink Holder — Black, flat...

High-strength mounting kit with a self-leveling drink holder, 360° rotation, tethering hook, and clamp range for rails/tubes and flat surfaces.

€36.97 €46.47

-€3.43

SW-MOTECH T-Lock Holder for Socket Arm — Black

Quickly and securely attach accessory bags to the handlebar; adjustable via ball-and-socket joint. Includes mounting material and instructions.

€13.38 €16.81

-€8.60

SW-MOTECH GPS Mount Kit for Tead Tube with T-Lock — 1" ball, Black

T-Lock GPS mount for head-tube attachment; 1" ball compatible. Includes socket arm, M8 ball adapter, ball joint with plate, mounting material and instructions.

€33.42 €42.02

Universal GPS Mount kit with T-Lock Smartphone big — Black

-€9.46

SW-MOTECH Universal GPS Mount kit with T-Lock Smartphone big — Black

Secure T-Lock smartphone mount for large phones (fits devices 144 x 71 x 7 mm to 165 x 80 x 12 mm). Silicone straps, 2-inch socket and ball joints for flexible positioning. Includes clamp, ball, socket arm, mirror support and mounting hardware.

€36.76 €46.22

T-Lock Holder for Smartphone small — Black, Plastic

-€2.58

SW-MOTECH T-Lock Holder for Smartphone small — Black, Plastic

Quick-mount T-Lock holder for smartphones with outer dimensions 130 x 70 x 6 mm (min) to 150 x 75 x 10 mm (max). Includes mounting material and instructions. Total weight appr. 0.1 lb.

€10.03 €12.61

T-Lock Holder for Smartphone Big — Black

-€2.58

SW-MOTECH T-Lock Holder for Smartphone Big — Black

Quick, secure T-Lock holder for large smartphones. Fits up to 165 x 80 x 12 mm; minimum 144 x 71 x 7 mm (two of three dimensions required). Includes mounting material and instructions.

€10.03 €12.61

-€17.19

SW-MOTECH 30mm Bar Riser — 30 mm, powder-coated

Increases handlebar height by 30 mm for improved comfort. Bike-specific fit; no cable extension required. Kit includes 2 risers, instructions and mounting hardware.

€66.84 €84.03

-€20.62

SW-MOTECH 50mm Bar Riser — 50 mm, 32 mm clamp, black powder-coated

Raises the handlebar by 50 mm for improved seating position and comfort. Bike-specific fit; no cable extensions needed. Includes mounting kit and instructions.

€80.22 €100.84

Quick Grip™ Phone Mount with U-Bolt Base — U-bolt mount, 1" ball, Black, Flat

-€20.12

RAM MOUNTS Quick Grip™ Phone Mount with U-Bolt Base — U-bolt mount, 1"...

Handlebar phone mount with zinc-coated u-bolt base; fits 1/2"–1-1/4" rails, spring-loaded cradle and adjustable double-socket arm.

€78.24 €98.36

Constrictor Phone Holder — Universal handlebar fit, Black flat finish

-€13.82

CIRO Constrictor Phone Holder — Universal handlebar fit, Black flat...

Secure mechanical phone mount with rubber-lined contact points, compact arms, adjustable foot base, ambidextrous lever, and one-finger lock; compatible with Gen 2 ball mounts.

€39.03 €52.85

Constrictor Phone Holder — Universal fit, perch mount, black

-€21.95

CIRO Constrictor Phone Holder — Universal fit, perch mount, black

Adjustable, rubber-lined phone holder with compact arms and quick one-finger lock; compatible with Gen 2 ball mounts.

€62.14 €84.09

Constrictor Phone Holder — Universal cradle compatibility, universal handlebar fit, Black

-€21.22

CIRO Constrictor Phone Holder — Universal cradle compatibility,...

Mechanical-grip phone holder with quick one-finger lock, adjustable foot base, ambidextrous lever, and Gen 2 ball mount compatibility.

€60.02 €81.24

$1-1/4\" Touring Handlebar — 32 mm (1-1/4\"), 76 cm (30\"), Black gloss$

-€89.08

TODD'S CYCLE 1-1/4\" Touring Handlebar — 32 mm (1-1/4\"), 76 cm (30\"),...

Knurled touring handlebar with secure clamping, OEM-fit wire exit, more than 35° of adjustment, compatible with hydraulic clutches. Made in the U.S.A.

€346.43 €435.51

1-1/4" Touring Handlebar — 1-1/4" clamp, 12" rise, 31" width, gloss black

-€89.08

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 12" rise, 31" width,...

Touring handlebar with knurled clamping area and internal wiring, fits OEM riser and clamps, and works with hydraulic clutches.

€346.43 €435.51

1-1/4" Touring Handlebar — 1-1/4" clamp, 31" width, 12" rise, flat black

-€82.87

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 31" width, 12" rise,...

Classic ape-hanger profile with modern compatibility. Knurled center for secure clamping; notched for throttle-by-wire. Works with OEM riser and clamps; accepts heated grips and hydraulic clutches. Made in the U.S.A.

€322.26 €405.13

Gen 2 Cybercharger® Phone Holder — 2-3/8"–4" wide, 15W wireless, 12V

-€44.27

CIRO Gen 2 Cybercharger® Phone Holder — 2-3/8"–4" wide, 15W...

Compact, expandable phone holder with up to 15W wireless charging, waterproof electronics, mechanical grip, and Gen 2 ball mount compatibility.

€125.08 €169.35

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 14" rise, 32" width

-€89.08

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 14" rise, 32" width

Knurled clamping area for a positive grip
Works with OEM riser and clamps; correct wire exit location
No removal of stock pin required; wide adjustment range
Compatible with hydraulic clutches and heated grips
Notched for throttle-by-wire; adjustable fit

€346.43 €435.51

Gen 2 Cybercharger® Phone Holder — Expandable 2-3/8"–4" wide, 12V, Black

-€56.59

CIRO Gen 2 Cybercharger® Phone Holder — Expandable 2-3/8"–4" wide,...

Wireless Qi phone holder with up to 15W fast charge, waterproof electronics, soft rubber-lined grip, adjustable 2-3/8"–4" fit, and one-finger lock.

€159.91 €216.50

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 17" rise, Black gloss

-€91.31

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 17" rise, Black gloss

1-1/4" touring handlebar with knurled clamping area. Works with OEM riser and clamps, correct wire exit, adjustable over 35°, compatible with hydraulic clutches. Made in the U.S.A.

€355.09 €446.40

Gen 2 Drink Holder — Universal handlebar fit, Perch mount, Black, Chrome

-€25.02

CIRO Gen 2 Drink Holder — Universal handlebar fit, Perch mount,...

Soft neoprene basket, cushioned lined ring, durable nylon construction, weatherproof; mounts to ball mount system for adjustable placement.

€70.80 €95.82

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls