Handlebars & Controls (3)

-€3.22

DRAG SPECIALTIES Comfort Grip™ Brake Lever — Chrome, Aluminum

Offset lever design for easy and confident braking control.

€9.10 €12.32

$Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\") clamp, Chrome$

-€43.33

DRAG SPECIALTIES Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\")...

Aluminum handlebar control kit. Uses OEM or equivalent switches (switches not included). Replacement parts sold separately.

€122.49 €165.82

Handlebar Switch Housing Kit — 1" (25.4 mm), Chrome

-€4.13

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" (25.4 mm), Chrome

Accepts OEM-style switches and wiring.

Switches and switch clamps sold separately.

€11.66 €15.79

$Handlebar Switch Housing Kit — 25.4 mm (1\"), Chrome$

-€4.53

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1\"), Chrome

Precision switch housings and brake/clutch controls that accept OEM-style switches; switches and clamps sold separately.

€12.84 €17.37

-€4.70

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" handlebar, chrome

Polished brake and clutch controls with die-cast switch housings; accepts OEM-style switches and wiring. Switches and clamps sold separately.

€13.26 €17.96

-€5.34

DRAG SPECIALTIES Clutch Lever Bracket — left mount, chrome

Die-cast aluminum clutch lever bracket offering precise lever alignment and easy installation.

€15.07 €20.41

-€3.79

DRAG SPECIALTIES Handlebar Switch Housing — 25.4 mm (1"), Chrome

Chromed die-cast aluminum handlebar switch housing; switches available separately.

€10.70 €14.49

-€4.10

DRAG SPECIALTIES Replacement Master Cylinder Cap — Rear, Chrome

Replacement cap for brake master cylinders that restores a secure fluid seal and resists corrosion.

€11.63 €15.73

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€77.33

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€218.55 €295.88

-€62.86

DRAG SPECIALTIES Cylinder — 1200 cc, 3.435" bore, rear

Cast-iron construction meets or exceeds OEM tolerances; resists higher pressure and heat than stock.

€177.65 €240.51

$Cylinder — 1200 cc, bore 3.435\", front, Black$

-€64.43

DRAG SPECIALTIES Cylinder — 1200 cc, bore 3.435\", front, Black

Cast-iron cylinder that meets or exceeds OEM tolerances and withstands greater pressure and heat than stock.

€182.09 €246.52

-€53.06

DRAG SPECIALTIES Cylinder — 3.435" bore, 74 ci, Black

Cast-iron cylinder that meets or exceeds OEM tolerances. Withstands greater pressure and heat than stock components.

€149.97 €203.03

-€57.43

DRAG SPECIALTIES Cylinder — 3.435", 74"

Cast-iron cylinder meets or exceeds OEM tolerances and resists higher pressure and heat for improved durability.

€162.27 €219.70

Handlebar Damper Kit for Early Harley-Davidson Models — Black, Chrome

-€3.08

DRAG SPECIALTIES Handlebar Damper Kit for Early Harley-Davidson Models — Black,...

Replacement kit with one pair of vibration-control units and four polished cup washers for early Harley-Davidson models.

€8.70 €11.78

1-1/4" Buffalo Springer Handlebar — 1-1/4" diameter, 1" clamp, 31" width

-€49.42

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — 1-1/4" diameter, 1" clamp,...

Springer-style 1-1/4" handlebar with knurled center; fits OEM Springer risers and clamps. Made in USA.

€139.67 €189.09

1-1/4" Buffalo Springer Handlebar — 1-1/4" diameter, 36" width, 1" clamp

-€79.53

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — 1-1/4" diameter, 36"...

Classic Buffalo Springer handlebar built for comfort and OEM Springer fitment. Made in the U.S.A.

€224.75 €304.28

1-1/4" Buffalo Springer Handlebar — 12-1/2" rise, 38-1/2" width, Chrome

-€81.53
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — 12-1/2" rise, 38-1/2"...

Springer-style 1-1/4" handlebar with a 1" clamping area and center diamond knurling; fits OEM Springer risers. Made in the U.S.A.; not for use with electronic throttle control or heated grips.

€230.36 €311.89

1-1/4" Buffalo Bar Handlebar — 1-1/4" clamping, 37-3/4" width, 13" rise

-€75.70

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" clamping, 37-3/4" width,...

Buffalo-style handlebar with oversized diameter, slotted for Throttle-By-Wire, knurled center; made in the U.S.A. Not compatible with 883C/1200C stock risers.

€213.93 €289.63

-€75.70

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 37-3/4" width, Black

Buffalo-style handlebar with knurled center, TBW-ready notches, and pre-drilled controls for easy accessory installation.

€213.93 €289.63

-€91.33

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 37-3/4" width, chrome

Buffalo Bar handlebar slotted for throttle-by-wire, with a knurled center and pre-drilled sections to accept heated grips. Made in the U.S.A. Not for use with stock risers on 883C/1200C.

€258.10 €349.43

1-1/4" Buffalo Bar Handlebar — 1-1/4" clamp, 37-3/4" width, 17-3/4" height, Chrome

-€91.33

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" clamp, 37-3/4" width,...

Oversized buffalo-style handlebar engineered for comfort and control; slotted for Throttle-By-Wire and accepts heated grips.

€258.10 €349.43

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company