Handlebars & Controls (29)

-€4.69
Out of Stock

DRAG SPECIALTIES Turn Signal Switch Extension — Chrome, Pair

Updates switch caps for added convenience. Quick, easy installation.

€13.24 €17.93

-€4.21
Out of Stock

DRAG SPECIALTIES Turn Signal Switch Extension — Pair, Black matte

Updates switch caps for easier reach; quick, easy installation.

€11.92 €16.13

-€25.11
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete assembly, fully preassembled for quick, easy installation.

€70.95 €96.06

$Rear Brake Master Cylinder Rebuild Kit — 15.9 mm (5/8\"), Rear, Black, Silver$

-€3.20
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — 15.9 mm (5/8\"),...

Rebuild kit for rear master cylinder — fits various H-D models, meets or exceeds OEM specs, includes metal piston.

€9.06 €12.26

-€6.85
Out of Stock

DRAG SPECIALTIES Master Cylinder Boots — Rear, Black, 5 Pack

Replacement boots that seal and protect rear master cylinder internals.

€19.39 €26.24

1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise, Black gloss

-€49.39
Out of Stock

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise,...

Cafe-style handlebars with billet end caps, slotted for internal wiring, fits 3-1/2" on-center risers. Made in the U.S.A.

€192.06 €241.45

-€49.39
Out of Stock

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise

Cafe-style handlebar that creates a more aggressive riding position. Slotted for internal wiring, includes billet end caps, made in the U.S.A.

€192.06 €241.45

Clutch/Brake Cable Anchor Pin and Bushing — Polished Silver, 12 Pack

-€6.61
Out of Stock

DRAG SPECIALTIES Clutch/Brake Cable Anchor Pin and Bushing — Polished Silver,...

Replacement anchor pin and plastic bushings for early-style clutch and brake levers.

€18.66 €25.27

-€41.50
Out of Stock

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, polished

Motocross-style, low-profile handlebar slotted for internal wiring. Smooth, unknurled surface. Made in the U.S.A.

€161.39 €202.89

1" Moto Bar Handlebar — 30" width, 3-1/2" rise, 1" clamp, sandblast finish

-€36.81
Out of Stock

TODD'S CYCLE 1" Moto Bar Handlebar — 30" width, 3-1/2" rise, 1" clamp,...

Low-profile motocross-style handlebar with slotted internal wiring, no knurling, made in the U.S.A.

€143.14 €179.95

-€4.19
Out of Stock

DRAG SPECIALTIES SEATS Leather Lever Covers — Black, Natural, Pair

Handcrafted leather lever covers with laces. Set includes cover, laces, beads and instructions. Fit larger standard cruiser-style levers; not for wide-blade levers.

€11.82 €16.01

1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1") clamp, 88.9 mm (3-1/2") rise, Gloss Black

-€33.72
Out of Stock

TODD'S CYCLE 1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1") clamp, 88.9...

Low-profile motocross-style bar slotted for internal wiring, no knurling. Made in the U.S.A.

€131.14 €164.86

1" Beater Bar Handlebar — 1" clamp, 70.5 cm (27-3/4") width, 20.5 cm (8") rise

-€41.50
Out of Stock

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 70.5 cm (27-3/4") width,...

Classic beater handlebar with a straight, narrow profile, internal wiring slotting, and a smooth, unknurled finish. Made in the U.S.A.

€161.39 €202.89

1" Beater Bar Handlebar — 25.4 mm (1") clamp, 70.5 cm (27-3/4") width, 20.5 cm (8") rise, Flat Black

-€36.22
Out of Stock

TODD'S CYCLE 1" Beater Bar Handlebar — 25.4 mm (1") clamp, 70.5 cm...

Classic, straight beater handlebar with slotted wiring and a smooth, unknurled finish. Made in the U.S.A.

€140.84 €177.06

-€9.08
Out of Stock

DRAG SPECIALTIES Handlebar Switch Button Caps — 25.4 mm (1 in), Chrome, 10 Pack

Molded plastic switch button caps for quick replacement. Sold each to consumers; available to dealers in 10‑packs.

€25.66 €34.74

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58
Out of Stock

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

-€35.41
Out of Stock

TODD'S CYCLE 1" Beater Bar Handlebar — 27-3/4" width, 10" rise, Gloss Black

Classic beater-style handlebar with a straight, narrow profile and subtle pullback. Slotted for internal wiring, no knurling, made in the U.S.A.

€137.69 €173.10

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, Polished

-€70.84
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic, narrow beater-style handlebar with a comfortable wrist angle; slotted for internal wiring; made in the U.S.A.

€275.48 €346.32

-€4.52
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Right mount, 1 button, Chrome

OEM-replacement handlebar switch kit with color-coded 60" leads and protective sleeves. Individual switches available separately.

€12.82 €17.34

-€64.81
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 1-1/4" dia, 33-3/4" wide, Black gloss

Classic, narrow beater handlebar with a comfortable wrist angle; slotted for internal wiring, pre-drilled and notched for Throttle-By-Wire.

€252.06 €316.87

-€7.54
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Left upper, 2-button, 60 in leads, Chrome

OEM-replacement handlebar switch kit with color-coded leads, black protective sleeves and 60" leads. Individual switches available separately. Fits U.S.A. and International models.

€21.31 €28.85

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, 12 cm (4-3/4") pullback

-€68.06
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic beater-style handlebar: straight, narrow profile with a comfortable wrist angle and slotted wiring for a clean build.

€264.66 €332.72

-€4.62
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Left lower, Chrome

OEM-replacement handlebar switch kit with color-coded leads and 60" leads; individual switches sold separately.

€13.07 €17.69

-€61.52
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 30-1/2" width, 1-1/4" clamp, polished

Classic, simple beater bar with a comfortable wrist angle. Slotted for internal wiring, pre-drilled and knurled at the center. Made in the U.S.A.

€239.20 €300.72

-€13.39
Out of Stock

DRAG SPECIALTIES Slotted Wide Blade Lever Set — Brake, Clutch, Pair, Chrome

Slotted wide blade lever set with CNC-machined slots, anti-rattle clip and clutch lever pivot bushings. Sold as a pair.

€37.84 €51.23

$1-1/4\" Beater Bar — 32 mm clamp, 77.5 cm width, 25.5 cm rise, Black gloss$

-€68.06
Out of Stock

TODD'S CYCLE 1-1/4\" Beater Bar — 32 mm clamp, 77.5 cm width, 25.5 cm rise,...

Classic 1-1/4" Beater Bar with a straight, narrow profile and comfortable wrist angle. Slotted for internal wiring and pre-drilled for easy installation.

€264.66 €332.72

-€11.69
Out of Stock

DRAG SPECIALTIES Wide Blade Lever Set — Chrome, Pair

Late-style wide, flat design; lightweight construction; compatible with OEM lever perches.

€33.06 €44.75

-€6.44
Out of Stock

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10 Pack, Chrome

Replacement pin kit for lever and linkage pivots; includes pins and retaining clips for easy installation.

€18.18 €24.62

-€3.31
Out of Stock

DRAG SPECIALTIES Standard Clutch/Brake Lever — Fits '65 Panhead, Chrome

Standard lever designed to fit '65 Panhead clutch and brake controls for precise, reliable operation.

€9.35 €12.66

-€2.32
Out of Stock

DRAG SPECIALTIES Standard Clutch/Brake Lever — Fits '65 Panhead, Polished

Fits '65 Panhead clutch and brake controls. Standard replacement lever for classic restorations.

€6.52 €8.84

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company