Handlebars & Controls (27)

Pivot Pin/Clip Kit — Clutch, Brake, 10-pack, Aluminum, Black Polished

-€13.49
Out of Stock

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch, Brake, 10-pack, Aluminum, Black...

Replacement pin kit for clutch and brake pivot points. Pins and retaining clips included for straightforward installation.

€38.14 €51.63

Throttle Control Adjusting Screw — Chrome

-€0.92
Out of Stock

DRAG SPECIALTIES Throttle Control Adjusting Screw — Chrome

Adjustable screw with spring for fine tension control and straightforward adjustment.

€2.59 €3.51

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2" width, flat black

-€28.04
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2"...

Comfort-oriented buffalo bar design
Slotted/notched for throttle-by-wire
Knurled center and pre-drilled ends
Made in the U.S.A.; not for use on 883C/1200C stock riser/clamp setups

€79.23 €107.27

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34" width, Chrome

-€74.84
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34" width, Chrome

1-1/4" diameter Buffalo Bar handlebar designed for comfort; slotted for Throttle-By-Wire; not for use with stock risers on 883C/1200C models.

€211.52 €286.36

-€4.72
Out of Stock

DRAG SPECIALTIES Handlebar Clamp — 1" clamping diameter, fits '74-'17 models

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers
Fits 1" OD diameter bars

€13.33 €18.05

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34" width, 1" clamp, Black gloss

-€56.78
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34" width, 1"...

Oversized 1-1/4" handlebar with knurled center, pre-drilled for wiring, throttle-by-wire ready, accepts heated grips. Not for use with stock risers on 883C/1200C models.

€160.44 €217.22

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 35" width, 2-1/4" rise, 1" clamp, Black gloss

-€56.78
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 35" width,...

Classic Buffalo-style 1-1/4" handlebar with knurled center, pre-drilled and ready for Throttle-By-Wire. Accepts heated grips; compatible with hydraulic clutch controls. Not for use with stock risers/clamp on 883C/1200C models.

€160.44 €217.22

-€21.14
Out of Stock

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm), Chrome

Billet aluminum clamp; covers clamping area of 1-1/4" bars sized to 1"; fits 3-1/2" on-center risers with offset holes; strengthens risers; made in USA.

€59.74 €80.88

Buffalo Handlebar Clamp — 1" (25.4 mm) clamping diameter, 3-1/2" on-center risers, Chrome

-€27.71
Out of Stock

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm) clamping diameter,...

Billet aluminum handlebar clamp that reinforces risers and improves control. Fits 1-1/4" handlebars sized down to 1" and works with 3-1/2" on-center risers.

€78.28 €105.99

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 32-3/4" width, 4-1/4" rise, Chrome

-€74.84
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 32-3/4" width,...

Classic Buffalo Bar profile with 1-1/4" diameter, 1" clamping area, knurled center, Throttle-By-Wire ready, made in the U.S.A.

€211.52 €286.36

1-1/4" Buffalo Touring Handlebar — 33-3/4" width, Black gloss

-€56.78
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 33-3/4" width, Black gloss

Diamond-knurled for internal wiring; accepts stock controls and H-D OEM heated grips. Designed for electronic throttle control applications. Made in the U.S.A.

€160.44 €217.22

$1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 34-1/2\" width, Gloss Black$

-€65.89
Out of Stock

DRAG SPECIALTIES 1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 34-1/2\"...

Large-diameter Buffalo Bar for maximum comfort and a bagger-style bend. Slotted and notched for throttle-by-wire, pre-drilled, knurled center, made in the U.S.A. Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models.

€186.20 €252.09

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.5" , Black

-€85.70
Out of Stock

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Ductile cast-iron sleeved cylinders pressed into aluminum castings. Sleeve ribs lock to the casting; finished slightly undersized for final honing. Ideal for stock replacement.

€242.22 €327.92

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 36" width, 1" clamp, Chrome

-€81.53
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 36" width, 1"...

Classic 1-1/4" buffalo-style handlebar with dimpled steel construction, knurled center and pre-drilled ends. Not for use with stock risers on 883C/1200C.

€230.36 €311.89

1-1/4" Touring Handlebar — 32 mm (1-1/4") clamp, 28.5 cm (11-1/4") rise, black flat

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 32 mm (1-1/4") clamp, 28.5 cm...

Direct bolt-on upgrade for Road Glide; includes black control clamps; knurled riser for extra grip; accepts H-D OEM heated grips; works with stock controls; compatible with TBW or cable throttle; retains OEM mount pin and offers >35° adjustment.

€200.05 €270.84

$1-1/4\" Touring Handlebar — 1-1/4\" clamp, 13-1/4\" rise, 35\" width, black flat$

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4\" Touring Handlebar — 1-1/4\" clamp, 13-1/4\" rise, 35\"...

Direct bolt-on for Road Glide; includes black control clamps, knurled center, accepts H-D OEM heated grips, works with stock controls, TBW or cable, over 35° adjustment.

€200.05 €270.84

1-1/4" Touring Handlebar — 1-1/4", 35", Black, flat finish

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4", 35", Black, flat finish

Direct bolt-on upgrade for Road Glide models. Includes black control clamps to replace oversize OEM clamps. Knurled center for extra grip. Made in the U.S.A. Accepts H-D OEM heated grips. Works with stock controls and accommodates TBW or cable throttles.

€200.05 €270.84

1-1/4" Buffalo Touring Handlebar — 32 mm (1-1/4"), 25.4 mm (1"), Flat Black

-€75.70
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 32 mm (1-1/4"), 25.4 mm...

Diamond-knurled and machined for internal wiring. Accepts stock controls and handlebar clamp. Designed for electronic throttle control applications and compatible with Throttle-By-Wire. Accepts H-D OEM heated grips. Made in the U.S.A.

€213.93 €289.63

$1-1/4\" Buffalo T-Bar — 29-1/2\" width, 7\" rise, Chrome$

-€81.03
Out of Stock

DRAG SPECIALTIES 1-1/4\" Buffalo T-Bar — 29-1/2\" width, 7\" rise, Chrome

Comfort-focused Buffalo T-bar. Optional gauge mounts sold separately. Made in the U.S.A. Not compatible with stock risers on 883C/1200C. Compatible with hydraulic clutch controls.

€228.98 €310.01

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 8" rise, 29-3/4" width, Chrome

-€81.03
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 8" rise,...

Premium Buffalo T-Bar handlebar offering improved comfort and compatibility with hydraulic clutch controls. Optional gauge mounts sold separately. Made in the U.S.A.

€228.98 €310.01

1-1/4" Buffalo T-Bar — 1-1/4" diameter, 8" rise, 29-3/4" width, black gloss

-€65.89
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" diameter, 8" rise, 29-3/4"...

Buffalo T-Bar handlebar. Optional gauge mounts sold separately. Made in the U.S.A. Not for use with stock risers on 883C/1200C models. Compatible with hydraulic clutch controls.

€186.20 €252.09

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 8" rise, 29-3/4" width, flat black

-€65.89
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 8" rise,...

T-bar handlebar engineered for comfort and control. Optional gauge mounts sold separately. Made in the U.S.A. Not compatible with stock risers/clamp on 883C/1200C.

€186.20 €252.09

1-1/4" Buffalo T-Bar — 1-1/4" diameter, chrome, 29-3/4" width

-€81.03
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" diameter, chrome, 29-3/4" width

1-1/4" diameter Buffalo T-Bar handlebar. Optional gauge mounts sold separately. Not for use with stock risers on 883C/1200C models.

€228.98 €310.01

Universal Ball Mount — 1" rubber ball, mirror post base, black powder-coated

-€3.89
Out of Stock

RAM MOUNTS Universal Ball Mount — 1" rubber ball, mirror post base, black...

Durable ball mount kit with a mirror-post base and included mounting hardware for motorcycles with relocated mirrors.

€15.11 €19.00

$1-1/4\" Buffalo T-Bar — 29-3/4\" width, 11\" rise, Black gloss$

-€65.89
Out of Stock

DRAG SPECIALTIES 1-1/4\" Buffalo T-Bar — 29-3/4\" width, 11\" rise, Black gloss

Comfort-focused Buffalo T-Bar with optional gauge mounts; made in the U.S.A.; not compatible with stock risers/clamp on 883C/1200C models; compatible with hydraulic clutch controls.

€186.20 €252.09

1-1/4" Buffalo T-Bar — 1-1/4" diameter, 11" rise, 29-3/4" width, flat black

-€65.89
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" diameter, 11" rise, 29-3/4"...

1-1/4" Buffalo T-Bar handlebar. Optional gauge mounts sold separately. Made in the U.S.A. Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models.

€186.20 €252.09

1-1/2" "Big" Buffalo Bar — 1-1/2" diameter, 8" rise, 30-1/2" width, Chrome

-€96.45
Out of Stock

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 1-1/2" diameter, 8" rise, 30-1/2"...

Handlebars for the biggest, fattest look with custom bends for comfort. Accepts heated grips and hydraulic clutch; fits most '99+ Harley-Davidson models. Made in the U.S.A.

€272.57 €369.02

1-1/2" "Big" Buffalo Bar — 1-1/2" (38 mm) diameter, fits most '99+ Harley-Davidson models

-€81.31
Out of Stock

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 1-1/2" (38 mm) diameter, fits most...

Big Buffalo-style handlebars with custom bends for comfort and a bold look; compatible with many '99+ Harley-Davidson models. Optional gauge mounts sold separately.

€229.77 €311.08

1-1/4" Buffalo T-Bar — 1-1/4" diameter, 30" width, Black gloss

-€65.89
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" diameter, 30" width, Black gloss

Classic T-bar handlebar with pre-drilled, knurled center; accepts heated grips; optional gauge mounts sold separately.

€186.20 €252.09

1-1/4" Buffalo T-Bar — 30" width, 13-1/2" rise, Chrome

-€81.03
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 30" width, 13-1/2" rise, Chrome

Classic Buffalo T-Bar with optional gauge mounts (sold separately). Made in the U.S.A. Not for use with stock risers/clamp on 883C/1200C. Compatible with hydraulic clutch controls.

€228.98 €310.01

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls