Handlebars & Controls (26)

Handlebar Riser & Top Clamp Kit — 1" clamp, 1/2-13 thread, 1-1/2" pullback, 9-1/2" rise, Chrome

-€91.91

DRAG SPECIALTIES Handlebar Riser & Top Clamp Kit — 1" clamp, 1/2-13 thread,...

Sold as a kit with two risers, one-piece top clamp and necessary hardware. Tapped for 1/2"-13 bolts. Made in the USA.

€259.75 €351.66

-€5.93
Out of Stock

DRAG SPECIALTIES Switch Cap Kit — 7-button, Chrome

Update the black OEM switch caps without replacing the entire switch. Quick, easy installation. Radio and cruise control switches not included in 6-piece kit.

€16.80 €22.73

1" Touring Handlebar — 1" clamp, 18" rise, 32-1/2" width, flat black

-€35.04

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 18" rise, 32-1/2" width, flat...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€99.03 €134.07

-€19.90
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1") handlebar, Chrome

Die-cast switch housings with radiused edges and OEM-style clamps; switches and clamps sold separately.

€56.25 €76.15

1" T-Bar — 1" diameter, 6" rise, 23-1/2" width, Chrome

-€64.21

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 6" rise, 23-1/2" width, Chrome

Steel tubing construction with a wide choice of bends for a custom fit. Made in the U.S.A.

€181.44 €245.65

-€19.90
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" handlebar diameter, Black

Chrome brake and clutch controls with die-cast switch housings that accept OEM-style switches and wiring. Switches and clamps sold separately.

€56.25 €76.15

1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, Chrome

-€64.21

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, Chrome

Steel tubing construction, multiple bends for a custom fit, made in the U.S.A.

€181.44 €245.65

1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, gloss black

-€49.06

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, gloss black

Steel tubing construction, multiple bend options, made in the U.S.A.

€138.66 €187.72

1" T-Bar — 1" diameter, 10" rise, 23.5" width

-€49.06

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 10" rise, 23.5" width

Steel-tubing T-bar with multiple bends for a customizable fit; made in the U.S.A.

€138.66 €187.72

-€12.58

DRAG SPECIALTIES Pivot Pin/Clip Kit — Black, Polished, 10-pack

Replacement kit for restoring secure pivot connections and reducing play.

€35.57 €48.15

1" T-Bar — 1" diameter, 29-1/2" wide, 9-1/4" rise, Chrome

-€64.21

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 29-1/2" wide, 9-1/4" rise, Chrome

Steel tubing construction with multiple finish options. Wide selection of bends for a customized fit. Made in the U.S.A. Accepts heated grips; notched for throttle-by-wire.

€181.44 €245.65

-€12.90

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-pack, Chrome

Replacement kit for worn hardware; easy to install and ideal for routine maintenance.

€36.45 €49.35

1" T-Bar — 1" diameter, 29-1/2" width, 11" rise, Chrome

-€64.21

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 29-1/2" width, 11" rise, Chrome

Steel tubing in a variety of finishes with multiple bend options for a tailored fit. Made in the U.S.A.

€181.44 €245.65

-€12.86

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch and Brake, Chrome, 10 Pack

Replacement pin kit for pivot assemblies; easy installation and reliable retention.

€36.34 €49.20

Throttle Control Adjusting Screw — Chrome

-€0.92
Out of Stock

DRAG SPECIALTIES Throttle Control Adjusting Screw — Chrome

Adjustable screw with spring for precise throttle control.

€2.59 €3.51

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2" width, Black flat

-€28.04

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2"...

Comfort-focused Buffalo Bar handlebar with TBW-ready design and knurled center for secure grip.

€79.23 €107.27

Leather Lever Fringe — 12" L, Black, Natural

-€12.74

SHOW CHROME Leather Lever Fringe — 12" L, Black, Natural

Leather lace-up covers for brake and clutch levers. 12" L.

€27.24 €39.98

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), Chrome, Not for stock risers on 883C/1200C

-€74.84

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), Chrome, Not for...

1-1/4" diameter Buffalo bar with knurled center, pre-drilled for heated grips, and notched for throttle-by-wire. Not for stock risers on 883C/1200C.

€211.52 €286.36

-€4.72

DRAG SPECIALTIES Handlebar Clamp — 1" clamping diameter, fits '74-'17 models

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers
Fits 1" OD diameter bars

€13.33 €18.05

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 34" width, 5-1/2" rise, 1" clamp, Black gloss

-€56.78

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 34" width, 5-1/2"...

1-1/4" Buffalo Bar handlebar with knurled center, throttle-by-wire ready, pre-drilled and compatible with hydraulic clutch controls. Made in the U.S.A.

€160.44 €217.22

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 89 cm (35"), Black

-€56.78

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 89 cm (35"), Black

Buffalo-style handlebar offering comfortable ergonomics, throttle-by-wire ready, pre-drilled, and compatible with hydraulic clutch controls.

€160.44 €217.22

$Buffalo Handlebar Clamp — 1\" (25.4 mm) clamping diameter, 3-1/2\" on-center riser fit, Chrome$

-€21.14

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1\" (25.4 mm) clamping diameter,...

Billet aluminum clamp that strengthens risers and fits 1-1/4\" bars sized down to 1\"; improves control with aftermarket or stock handlebars.

€59.74 €80.88

-€27.71

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm), Chrome

Billet-style handlebar clamp that covers the full clamping area and improves riser strength and control.

€78.28 €105.99

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 32-3/4" width, 4-1/4" rise, 1" clamp, Chrome

-€74.84
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 32-3/4" width,...

Ultimate 1-1/4" diameter handlebar for maximum comfort.
1" diameter clamping area; slotted and notched for throttle-by-wire.
3-1/2" on-center knurling; pre-drilled to accept heated grips.
Made in the U.S.A.; not for use with stock risers and clamp/gauge mount on 883C/1200C models.

€211.52 €286.36

1-1/4" Buffalo Touring Handlebar — 33-3/4" width, 2-1/4" rise, Gloss Black

-€56.78

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 33-3/4" width, 2-1/4" rise,...

Buffalo Touring handlebar with diamond-knurled center, pre-drilled and notched for throttle-by-wire, accepts heated grips and stock controls; made in the USA.

€160.44 €217.22

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping, Black gloss

-€65.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping,...

Broad Buffalo-style handlebar with slotted Throttle-By-Wire notches, knurled center, and pre-drilled holes. Made in the U.S.A. Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. Compatible with hydraulic clutch controls.

€186.20 €252.09

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.5" , Black

-€85.70

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Ductile cast-iron sleeved cylinders pressed into aluminum castings. Sleeve ribs lock to the casting; finished slightly undersized for final honing. Ideal for stock replacement.

€242.22 €327.92

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 36" width, 1" clamp, Chrome

-€81.53

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 36" width, 1"...

Classic 1-1/4" buffalo-style handlebar with dimpled steel construction, knurled center and pre-drilled ends. Not for use with stock risers on 883C/1200C.

€230.36 €311.89

1-1/4" Touring Handlebar — 1-1/4" diameter, 11-1/4" rise, 35" width, Black

-€70.79

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" diameter, 11-1/4" rise, 35"...

Direct bolt-on upgrade for Road Glide with included black control clamps; knurled center, accepts H‑D heated grips, works with stock controls.

€200.05 €270.84

1-1/4" Touring Handlebar — 1-1/4" clamp, 13-1/4" rise

-€70.79

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamp, 13-1/4" rise

Direct bolt-on upgrade for Road Glide models.

Includes black control clamps to replace oversize OEM clamps.

Knurled riser area for extra grip; accepts H-D OEM heated grips.

Works with stock controls and TBW or cable throttles; over 35° adjustment.

Made in the U.S.A.

€200.05 €270.84

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls