Handlebars & Controls (24)

Front Brake Master Cylinder Assembly — 15 mm bore, 25.4 mm clamp (1") , Black

-€22.73

DRAG SPECIALTIES Front Brake Master Cylinder Assembly — 15 mm bore, 25.4 mm...

Includes lever and clamp half. Compatible with DOT 4 and DOT 5 brake fluid. Fits 1" and 1-1/4" handlebars.

€204.59 €227.32

-€10.57
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4") bore, chrome polished

Complete rear master cylinder assembly, fully assembled for easy installation.

€95.17 €105.74

-€18.49

DRAG SPECIALTIES Rear Brake Master Cylinder — Silver

Complete, fully assembled rear master cylinder ready to install and restore braking performance.

€166.44 €184.93

-€18.49

DRAG SPECIALTIES Rear Brake Master Cylinder — Rear, Black

Complete rear master cylinder assembly, fully assembled for easy installation.

€166.44 €184.93

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome polished$

-€18.20

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome...

Complete rear master cylinder assembly; fully assembled for easy installation. Ideal for maintenance and replacement.

€163.78 €181.98

Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

-€18.20

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

Complete brake assembly, fully assembled for easy installation and quick replacement.

€163.78 €181.98

-€16.36

DRAG SPECIALTIES Rear Brake Master Cylinder — Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€147.21 €163.57

-€16.36

DRAG SPECIALTIES Rear Brake Master Cylinder — Black, B17-655MB

Complete hydraulic assembly, fully assembled for fast installation.

€147.21 €163.57

Cut-Down Front Brake Master Cylinder — 17.5 mm bore, 25.4 mm clamp

-€20.91

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 17.5 mm bore, 25.4 mm...

Chrome die-cast aluminum master cylinder cut down 0.256" for a lower profile; includes chrome mounting clamp and brake lever. Not for use with 1-1/4"/1-1/2" handlebars that are not clearanced.

€188.22 €209.13

Cut-Down Front Brake Master Cylinder — 14.3 mm (9/16") bore, 25.4 mm (1") clamp, Chrome

-€20.40
Out of Stock

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 14.3 mm (9/16") bore,...

Cut-down front brake master cylinder reduced 0.256" for a lower lever profile; includes mounting clamp and brake lever. Not for use with non-clearanced 1-1/4"/1-1/2" handlebars.

€183.63 €204.03

Cut-Down Front Brake Master Cylinder — 15.9 mm (5/8"), 25.4 mm (1"), Chrome

-€20.91

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 15.9 mm (5/8"), 25.4 mm...

Chrome die-cast aluminum master cylinder, cut down for a lower profile; includes chrome clamp and brake lever. Not for use with handlebars without clearance.

€188.22 €209.13

-€44.53

KIBBLEWHITE Cylinder Stud Kit — 8-pack, Black

Precision-ground studs with radius-ground thread ends and hydraulically rolled threads for maximum strength and reduced notch sensitivity.

€125.97 €170.50

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

-€5.12

DRAG SPECIALTIES Slotted Wide Blade Lever Set — Hydraulic actuation, Chrome, Pair

Wide blade lever set with CNC-machined slots; includes anti-rattle clip and clutch lever pivot bushings.

€46.11 €51.23

$Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\") clamp, Chrome$

-€16.58

DRAG SPECIALTIES Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\")...

Aluminum handlebar control kit. Uses OEM or equivalent switches (switches not included). Replacement parts sold separately.

€149.24 €165.82

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€29.59

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€266.29 €295.88

$Cylinder — 1200 cc, bore 3.435\", front, Black$

-€24.65

DRAG SPECIALTIES Cylinder — 1200 cc, bore 3.435\", front, Black

Cast-iron cylinder that meets or exceeds OEM tolerances and withstands greater pressure and heat than stock.

€221.87 €246.52

-€20.30

DRAG SPECIALTIES Cylinder — 3.435" bore, 74 ci, Black

Cast-iron cylinder that meets or exceeds OEM tolerances. Withstands greater pressure and heat than stock components.

€182.73 €203.03

-€21.97

DRAG SPECIALTIES Cylinder — 3.435", 74"

Cast-iron cylinder meets or exceeds OEM tolerances and resists higher pressure and heat for improved durability.

€197.73 €219.70

1" Ape Hanger Handlebar — Rise 10", Width 38", Clamp 1", Chrome

-€17.23

DRAG SPECIALTIES 1" Ape Hanger Handlebar — Rise 10", Width 38", Clamp 1", Chrome

Knurled, slotted Ape Hanger handlebar with internal wiring and OEM heated-grip compatibility. Made in the USA.

€155.05 €172.28

1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, gloss black

-€13.68

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, gloss...

Seamless tubing with a knurled, slotted center; internal wiring ready and accepts OEM heated grips.

€123.09 €136.77

1" Ape Hanger Handlebar — 12" rise, 38" width

-€17.23

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 12" rise, 38" width

Seamless steel ape hanger with knurled center and internal wiring; accepts OEM heated grips.

€155.05 €172.28

1" Ape Hanger Handlebar — 1" clamp, 12" rise, 38" width

-€13.68

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 12" rise, 38" width

Seamless steel ape hanger with knurled center and slotted internal wiring; accepts OEM heated grips. Made in USA.

€123.09 €136.77

1" Ape Hanger Handlebar — 14" rise, 13" center width, 1" clamp diameter

-€17.23
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 14" rise, 13" center width, 1" clamp...

Seamless steel tubing ape hanger with knurled center, slotted for internal wiring and compatible with heated grips.

€155.05 €172.28

1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width

-€13.68

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width

A classic ape hanger shape with knurled, slotted center for internal wiring; accepts OEM heated grips and built from seamless steel tubing.

€123.09 €136.77

1" Ape Hanger Handlebar — Rise 16", Diameter 1", Width 38"

-€17.23

DRAG SPECIALTIES 1" Ape Hanger Handlebar — Rise 16", Diameter 1", Width 38"

Seamless steel tubing with a knurled, slotted center for internal wiring; accepts OEM heated grips; made in the USA.

€155.05 €172.28

1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width, Chrome

-€17.23

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width, Chrome

Ape Hanger handlebar with knurled center and slotted design for internal wiring, compatible with OEM heated grips. Made in the USA.

€155.05 €172.28

1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width

-€13.68

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width

Seamless, knurled Ape Hanger handlebar with slots for internal wiring and support for OEM heated grips.

€123.09 €136.77

1-1/4" Touring Handlebar — 1-1/4" clamp, Chrome, 34-3/4" wide

-€33.06

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamp, Chrome, 34-3/4" wide

Direct bolt-on upgrade for Road Glide models. Knurled center, accepts H-D heated grips, works with stock controls.

€297.58 €330.64

1-1/4" Touring Handlebar — 1-1/4", Ape Hanger, Black

-€27.08

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4", Ape Hanger, Black

Direct bolt-on touring handlebar for Road Glide with control clamps. Knurled center, accepts H-D heated grips, TBW compatible.

€243.76 €270.84

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls