Handlebars & Controls (2)

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 12" center width

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete installation kit with matching braided cables, brake lines, and preloaded pull-thru sleeving for easier wiring and a factory look.

€651.84 €825.35

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") handlebar, 25.4 mm (1") clamp, chrome

-€181.79

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and machined control mounts. Assembled in the U.S.A.

€553.23 €735.02

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 30.5 cm (12") center width, 25.4 mm (1") clamp

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking 1-1/4" handlebar kit with braided cables, preloaded pull-thru sleeving and all necessary hardware for fast installation.

€751.41 €951.42

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar installation kit with matching braided cables, brake lines, preloaded pull-thru sleeving and all required hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented internal routing design for easy full-harness installation and a clean routed look. Preloaded with E-Z pull-thru sleeving for fast wiring runs. CNC mandrel bends and machined control mounts for durable, high-quality fit and finish. Not compatible with stock risers or clamp/gauge mounts on 883C and 1200C models.

€331.15 €419.29

1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 1" clamp, 3-1/2" knurl

-€93.30

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 1"...

Patented internal design for easy wiring installations, preloaded E-Z sleeving, CNC mandrel bends, machined mounts, and high-luster finish.

€362.88 €456.18

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1" center section, 1" clamp, chrome

Patented Viking handlebar with internal wiring routing for clean, easy installations.

€331.15 €419.29

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center

Patented internal routing for easy wiring installations, preloaded E‑Z sleeve, CNC mandrel bends, machined mounts, high-luster finish.

€376.30 €473.06

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 30", 1" clamp, 3-1/2" rise, Black

Motocross-style low-profile bar with slotted internal wiring and unknurled finish. Made in the USA.

€131.14 €164.86

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamping, 30" width, 3-1/2" rise

Motocross-style low-profile handlebar with slotted internal wiring, smooth grip area, made in the USA.

€131.14 €164.86

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width

Classic, narrow beater bar with subtle pullback and ready for internal wiring.

€137.69 €173.10

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 27-3/4" width, 10" rise, Gloss Black

Classic beater-style handlebar with a straight, narrow profile and subtle pullback. Slotted for internal wiring, no knurling, made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic, simple beater bar with a straight, narrow style and subtle pullback; slotted for internal wiring and no knurling. Made in the USA.

€137.69 €173.10

1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

Polished welds, slotted for internal wiring, and notched for electronic throttle; accepts heated grips and requires special risers and clamps.

€390.35 €490.73

1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width,...

Made in the USA with polished welds.

Slotted for internal wiring; pre-drilled for heated grips.

Notched for throttle-by-wire; works with OEM heated grips.

Requires special risers and clamps (sold separately).

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

Polished welds and gloss finish
Slotted for internal wiring
Notched for electronic throttle
Requires special risers and clamps
Works with OEM heated grips
Made in the USA

€409.83 €515.21

1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5...

Strip-style handlebar with internal wiring slots and throttle notch.

Polished welds
Pre-drilled for controls
Works with OEM heated grips

€307.16 €386.14

1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"), Rise 38 cm (15")

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"),...

Strip-style ape hanger profile for a custom look
Slotted for internal wiring and pre-drilled
Notched for electronic throttle; accepts heated grips
Requires special risers and clamps

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width, 45.5 cm rise

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width,...

Strip handlebar with polished welds, slots for internal wiring, and a throttle notch. Made in the USA.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

Clean ape-hanger style with internal wiring slots, throttle notch, polished welds, and OEM heated-grip compatibility.

€307.16 €386.14

1" Handlebar — 12" rise, 33-3/4" width, Chrome

-€31.05

MAGNUM SHIELDING 1" Handlebar — 12" rise, 33-3/4" width, Chrome

Burr-free wiring slots and on-center knurling; CNC-bent for fit with comfortable, aggressive wrist angles.

€116.66 €147.71

-€31.89

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 14" rise, 34-1/4" width, chrome

Steel handlebar with burr-free wiring slots, precise knurling and CNC-bent construction for comfortable, aggressive wrist angles.

€119.82 €151.71

1" Handlebar — 1" clamp, 12" rise, 33-3/4" width

-€28.98

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, 33-3/4" width

CNC-bent handlebar with burr-free wiring slots, center knurling, and aggressive wrist angles.

€108.86 €137.84

-€29.83

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 14" rise, 34-1/4" width, black gloss

CNC-bent ape hanger with burr-free wiring slots and 3-1/2” on-center knurling for secure clamping. Comfortable yet aggressive wrist angles.

€112.03 €141.86

1" Handlebar — 1" clamping, 34-5/8" width, 10" rise

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 34-5/8" width, 10" rise

Quality-constructed handlebar with burr-free wiring slots, CNC-bent accuracy, and an aggressive wrist-angle profile. Some models may require riser changes.

€115.08 €145.71

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, Gloss Black

Quality CNC-bent handlebar with burr-free wiring slots and knurling for secure control placement.

€115.08 €145.71

Viking Warrior Handlebar — 32 mm clamp, 8" center, 12" rise, 6" pullback

-€97.94

MAGNUM SHIELDING Viking Warrior Handlebar — 32 mm clamp, 8" center, 12" rise,...

Patented internal wiring path, burr‑free peak, preloaded pull‑thru sleeving, machined mounts, OE-fit and adjustable, assembled in USA.

€367.95 €465.89

Crusader Square Top Handlebar — 36" width, 1" clamp, 10" rise, Black gloss

-€95.48

MAGNUM SHIELDING Crusader Square Top Handlebar — 36" width, 1" clamp, 10" rise,...

Bagger-style square top handlebar engineered for rider comfort and simplified internal wiring installation.

€371.32 €466.80

Crusader Square Top Handlebar — 36" width, 12" rise, 1" clamp, Black gloss

-€95.48

MAGNUM SHIELDING Crusader Square Top Handlebar — 36" width, 12" rise, 1" clamp,...

Bagger-style handlebar engineered for comfort with machined control mount, clean internal wiring routing, and CNC mandrel bends. Works with standard controls including hydraulic clutch.

€371.32 €466.80

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls