Handlebars & Controls (2)

-€46.11

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground studs that reduce notch sensitivity and improve fatigue resistance. Hydraulically rolled threads and 180,000 psi aircraft-quality material. Made in the U.S.A.

€130.44 €176.55

-€2.19

KIBBLEWHITE Cylinder Dowels — Black oxide, 4-pack

OEM replacement dowels for HD® Evolution engines that ensure precise cylinder alignment and reliable fitment.

€6.23 €8.42

-€68.02

ACCUTRONIX Custom Rear Master Cylinder Assembly — Chrome, Aluminum

5/8" bore rear master cylinder assembly with side-exit 3/8"-24 thread, 35° 10 mm banjo and 2-1/4" bolt pattern. Made in the U.S.A.

€264.52 €332.54

-€63.41

BURLY BRAND Dominator Handlebar — 32 mm (1-1/4") diameter, 29" width, 10"...

Responsive handling position with comfortable ergonomics; slotted for internal wiring, crowned for throttle-by-wire systems. Some models may require longer cables and will not fit integrated lower clamp designs.

€246.60 €310.01

-€63.41

BURLY BRAND Dominator Handlebar — 32 mm (1-1/4") diameter, 73.5 cm (29")...

Responsive handling position with comfortable styling; slotted for internal wiring and crowned for fly-by-wire. May require longer cables and will not fit models with integrated lower clamp.

€246.60 €310.01

-€54.17

BURLY BRAND Gorilla Ape Handlebar — 32 mm (1-1/4") dia, 25.4 mm (1")...

Tapered ape-hanger handlebar with dimpled/drilled sections and a notch for electronic throttles. May require longer cables for installation.

€210.39 €264.56

-€48.65

BURLY BRAND Gorilla Ape Handlebar — 36 cm (14-1/4") center width, 32 mm...

Dimpled Gorilla Ape handlebar pre-drilled for internal wiring and notched for TBW; may require longer cables.

€188.97 €237.62

-€68.45

BURLY BRAND Drag Bar — 1-1/4" diameter, 31" width, Black

Drag handlebar with tapered tube for stock controls. Made in USA. May require changes in cable or line length.

€193.68 €262.13

-€36.99

BURLY BRAND Bikini Beach Bar Handlebar — 87.5 cm width, 11.5 cm rise, 25.4...

Retro '40s bikini beach bar handlebar with knurled center and highly polished finish, pre-drilled for internal wiring.

€143.84 €180.83

-€52.84

BURLY BRAND 1-1/4" Handlebar — 1-1/4" diameter, 24 cm center width, 1"...

Tapered hand-control area, dimpled and drilled for internal wiring; may require extended cables or brake lines.

€205.50 €258.34

-€36.97

ACCUTRONIX Knurled Notched Custom Grips — 25.4 mm (1"), Chrome

High-quality construction
Machined from 6061-T6 billet aluminum
Made in the USA

€143.70 €180.67

-€68.99

BURLY BRAND 1-1/4" Handlebar — 1" clamp, 20" rise

Tapered hand control area accepts OEM or aftermarket controls. Dimpled 1" clamp area drilled for internal wiring.

€267.89 €336.88

-€59.12

BURLY BRAND 1-1/4" Handlebar — 32 mm (1-1/4"), 90 cm (35-1/2"), 25.4 mm clamp

Tapered hand-control area allows use of OEM or aftermarket controls; 1" clamping area dimpled and drilled for internal wiring; may require extended cables.

€229.89 €289.01

-€40.58

ACCUTRONIX Brass Knurled Custom Grips — 1" handlebar, Polished brass

Precision knurled grips with a closed-end design for a clean look. Made in the USA. Sold as a pair.

€157.82 €198.40

-€40.58

ACCUTRONIX Brass Knurled Custom Grips — 25.4 mm (1"), Polished

High-quality brass series construction for a premium look and lasting durability. Made in the USA. Ideal for riders who want classic style with reliable performance.

€157.82 €198.40

-€40.58

ACCUTRONIX Knurled Grooved Custom Grips — 25.4 mm (1"), Brass, Polished

Knurled grooved custom grips that enhance control with durable, high-quality construction. Made in the USA.

€157.82 €198.40

-€40.58

ACCUTRONIX Knurled Notched Custom Grips — 25.4 mm (1"), Brass

High-quality construction; machined from 6061-T6 billet aluminum; made in the USA.

€157.82 €198.40

-€45.80

ACCUTRONIX Custom Grips — 25.4 mm (1") , Chrome, Pair

Dual cable design. Made in the USA.

€178.10 €223.90

-€36.50

ACCUTRONIX Custom Grips — 25.4 mm (1") , Chrome

Dual cable design for reliable control. Made in the USA.

€141.94 €178.44

-€36.50

ACCUTRONIX Custom Grips — 25.4 mm (1"), Chrome

Dual cable design for reliable performance.

Made in the USA for consistent quality.

Clean, snag-reducing end design for a classic look.

€141.94 €178.44

-€119.98

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete installation kit for Burly Ape hangers
PTFE-lined brake lines with stainless steel braid
Includes extended brake, clutch, throttle/idle cables and wiring
Dresser kits reuse stock Throttle-By-Wire harness

€466.57 €586.55

-€119.98

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided cable and brake line kit for Burly Ape hangers. PTFE‑lined brake lines and extended cables with all required wiring.

€466.57 €586.55

-€119.98

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with extended brake, clutch and throttle cables plus wiring; PTFE-lined braided brake lines and hardware for 2" riser ape hanger installs.

€466.57 €586.55

-€39.94

BURLY BRAND 1" Scrambler Handlebar — 25.4 mm clamp, 15 cm rise, 85 cm width

Scrambler-style handlebar that adds comfortable height, reuses stock cables and is drilled for internal wiring (not for Throttle-By-Wire).

€155.11 €195.05

$Complete Stainless Braided Handlebar Cable/Brake Line Kit — 16\" riser fit, Ape Hanger, Silver$

-€119.98

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless steel braided cable and brake line kit for ape hanger handlebars; includes extended lines and wiring for full installation.

€466.57 €586.55

-€42.96

BURLY BRAND 1" Scrambler Handlebar — 1" clamp, 6" rise, 33-1/2" width, chrome

Scrambler-style handlebar that raises the reach, reuses stock cables and brake lines, and is drilled for internal wiring. Not for Throttle-By-Wire.

€167.09 €210.05

$Complete Stainless Braided Handlebar Cable/Brake Line Kit — 18\" ape hanger fit$

-€119.98

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided brake lines and extended control cables; PTFE-lined inner, heavy-duty outer braid. Includes wiring and hardware for Burly Ape installations.

€466.57 €586.55

-€91.41

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with extended brake, clutch and throttle/idle cables, PTFE-lined braided brake hoses, wiring and hardware for ape hanger installations.

€355.48 €446.89

$Complete Stainless Braided Handlebar Cable/Brake Line Kit — Fits 16\" ape hanger, Natural$

-€91.41

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided cable and brake line kit for ape hanger handlebars; includes extended brake, clutch and throttle cables plus wiring.

€355.48 €446.89

-€91.41

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete installation kit for Burly Ape hangers; includes extended brake line, extended clutch and throttle cables, and all necessary wiring for use with 2" risers.

€355.48 €446.89

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls