Handlebars & Controls (2)

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width, Black gloss

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width,...

Polished welds; slotted for internal wiring; notched for electronic throttle; accepts OEM heated grips; made in the U.S.A.; requires special risers and clamps.

€307.16 €386.14

V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"), Black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"),...

Moto-style anodized handlebar with slotted internal routing and notches for throttle-by-wire. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp, 1/2-13 thread, Black gloss

-€50.74

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp,...

Billet aluminum clamp and riser kit with one-piece clamp; riser tapped for 1/2"-13 bolts. Made in the USA.

€197.38 €248.12

-€80.34

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€312.43 €392.77

-€76.67

TODD'S CYCLE 1" Strip Handlebar — 75 cm (29-1/2"), 1" clamp, chrome

Strip handlebar slotted for internal wiring, pre-drilled for controls, with polished welds and a smooth, unknurled grip. Made in the U.S.A.

€298.17 €374.84

1" Strip Handlebar — 25.4 mm clamp, 75 cm width, 30.5 cm rise, Black

-€80.34

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 75 cm width, 30.5 cm rise,...

Classic 1" Strip handlebar with polished welds, slots for internal wiring, and a smooth, unknurled grip. Made in the U.S.A.

€312.43 €392.77

-€80.34

TODD'S CYCLE 1" Strip Handlebar — Silver

The 1" Strip Handlebar is a durable, thick-wall steel handlebar with polished welds and slots for internal wiring, designed without knurling or electronic throttle control notch.

€312.43 €392.77

1" Strip Handlebar — 25.4 mm clamp, 84.5 cm width (33-1/4"), 17" rise, Black gloss

-€76.50

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 84.5 cm width (33-1/4"),...

Strip-style 1" handlebar in thick-wall steel, polished welds, slotted for internal wiring, pre-drilled and unknurled.

€297.55 €374.05

-€72.86

TODD'S CYCLE [object Object]

1" Strip Handlebar: thick-wall steel with polished welds, slotted for internal wiring, no knurling or throttle-control notch; made in the U.S.A.

€283.33 €356.19

-€80.10

TODD'S CYCLE [object Object]

Classic 1-1/4" Blackline Club Handlebar — mounts with stock hardware, slotted for internal wiring, made in the U.S.A.

€311.52 €391.62

$Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4\") clamping diameter, 25.4 mm (1\") rise, 1/2-13 thread size, Black gloss$

-€50.74

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4\")...

High-quality clamp and riser kit for secure handlebar mounting. Includes one-piece riser clamp. Made in the USA.

€197.38 €248.12

-€76.26

TODD'S CYCLE [object Object]

1" Strip Handlebar — thick-wall steel, slotted for internal wiring, polished welds, no knurling or ETC notch. Made in the U.S.A.

€296.60 €372.86

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" diameter, 14" rise, 29" width

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; preserves clear sightlines to stock mirrors; made in the U.S.A.

€346.41 €435.48

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1" clamp, 13" rise, chrome

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1"...

Designed for batwing fairings; notched for throttle-by-wire; laser-cut wiring slots; fits factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13" rise, 36-1/2" width

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13"...

Notched for throttle-by-wire; large laser-cut, burr-free wiring slots; designed for batwing fairings; allows factory heated grips and stock controls; made in the U.S.A.

€363.73 €457.25

1-1/4" Strip Handlebar — 1-1/4" diameter, 35" width, 17" rise, Chrome

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" diameter, 35" width, 17" rise,...

Strip handlebar with polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips.

€338.66 €425.74

$1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm (1\") clamp, 30\" (76 cm) width$

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm...

Polished-weld strip handlebar with slotted wiring, hydraulic clutch compatibility, and heated-grip support.

€338.66 €425.74

-€89.25

TODD'S CYCLE [object Object]

Strip-style 1-1/4" handlebar with polished welds, wiring slots for internal or external routing, hydraulic clutch compatibility, heated-grip ready design, clear sightline to stock mirrors; made in the U.S.A.

€347.13 €436.38

-€87.08

TODD'S CYCLE [object Object]

1-1/4" Strip handlebar with polished welds, wiring slotting, hydraulic-clutch compatibility, heated-grip support, and a clear view to stock mirrors. Made in the U.S.A.

€338.66 €425.74

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm (29-1/2") width, 30.5 cm (12") rise, Chrome

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm...

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; clear line of sight to stock mirrors; made in the U.S.A.

€347.13 €436.38

$1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise, flat black$

-€89.25

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise,...

Strip-style handlebar with slotted wiring, compatible with hydraulic clutches and heated grips. Polished welds; made in the U.S.A.

€347.13 €436.38

1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14") rise, 32 mm (1-1/4") clamp, flat black

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14")...

Strip-style handlebar with polished welds and slotted wiring; compatible with hydraulic clutches and heated grips. Made in the U.S.A.

€346.41 €435.48

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls