Handlebars & Controls (2)

Cradle for Phones and GPS — Garmin eTrex 10/20/30 compatibility, black, flat finish

-€2.65

RAM MOUNTS Cradle for Phones and GPS — Garmin eTrex 10/20/30...

High-strength composite cradle for phones and handheld GPS. Includes two nuts and bolts for mounting. Contents not included; ball mount adapter sold separately.

€10.31 €12.96

Cradle for Phones and GPS — Compatible with Garmin Nuvi 2595, Black

-€2.49

RAM MOUNTS Cradle for Phones and GPS — Compatible with Garmin Nuvi 2595,...

Reinforced cradle for phones and GPS. Includes two nuts and bolts for mounting. Device, mount arm, and ball mount adapter sold separately. Contents not included.

€9.67 €12.16

-€1.93

RAM MOUNTS Ball Adapter with AMPS Plate — 1" ball, AMPS hole pattern, black

Compact right-angle ball adapter with a 1" diameter ball and 2" x 1.7" square base. Pre-drilled AMPS hole pattern for secure mounting.

€7.51 €9.44

X-Grip® IV Large Device Cradle — 1.75–4.5 in device, 2.25–5.75 in tablet, depth 0.875 in, black

-€7.55

RAM MOUNTS X-Grip® IV Large Device Cradle — 1.75–4.5 in device, 2.25–5.75...

Spring-loaded four-leg cradle fits devices 1.75–4.5 in (tablet 2.25–5.75 in, 0.875 in depth) with rubber-coated tips for a secure hold.

€29.34 €36.89

-€2.05

RAM MOUNTS X-Grip® Replacement Post Caps — 4 Pack, Black

Replacement post caps for RAM X-Grip holders. Includes four rubber caps and super glue. Compatible with all X-Grip versions.

€7.95 €10.00

1-3/4" Slimline Handlebar Risers — 44.5 mm rise, 25.4 mm clamp, Black gloss

-€39.91

BILTWELL 1-3/4" Slimline Handlebar Risers — 44.5 mm rise, 25.4 mm...

Slimline risers with investment-cast stainless steel construction. Fit 1" diameter bars; accept stock 1/2" x 13 mounting hardware. Pair.

€112.80 €152.71

2" Thunder Handlebar Risers — 2" rise, 1" clamp, polished

-€53.12

BILTWELL 2" Thunder Handlebar Risers — 2" rise, 1" clamp, polished

Investment-cast construction, fits 1" bars, 4-3/8" wide with 2" rise. Includes stainless top clamp hardware.

€150.11 €203.23

-€2.37

RAM MOUNTS Pin-Lock Security Knob — fits 1" B-size arms, Black

Tamper-resistant security knob with keyed lock and threaded mount. Low-profile, easy to install.

€9.23 €11.60

2" Thunder Handlebar Risers — 2" rise, 1" clamp, 4-3/8" wide, gloss black

-€53.12

BILTWELL 2" Thunder Handlebar Risers — 2" rise, 1" clamp, 4-3/8" wide,...

Investment-cast risers with included top clamp hardware for a clean, dependable handlebar upgrade.

€150.11 €203.23

$1\" Ball — black$

-€3.43

SW-MOTECH 1\" Ball — black

Secure mounting point for GPS, cameras and action cameras; attaches to existing ram-style mounts for reliable on-bike recording and navigation.

€13.38 €16.81

-€3.43

SW-MOTECH 1" Ball for GPS Mount — 1" ball, black

Universal 1" ball joint and mounting plate for GPS devices; compatible with TOMTOM Rider and Garmin zumo models.

€13.38 €16.81

-€3.43

SW-MOTECH 1" Ball — Riser mount clamp, Black

Mounting solution to attach an existing ram arm; accepts GPS units, cameras and GoPro devices.

€13.38 €16.81

Ball Clamp for Head Tube — SW-MOTECH, Mount Kit

-€5.15

SW-MOTECH Ball Clamp for Head Tube — SW-MOTECH, Mount Kit

Ball clamp for head tube. Fastens in control head pipes with inside diameters from 12.5 to 25.0 mm. 1" ball compatible with clamp arms and socket systems. Includes mounting kit and instructions.

€20.06 €25.21

Pivot Socket Arm — SW-MOTECH, Black, Aluminum, CPA.00.424.18000/B

-€2.58

SW-MOTECH Pivot Socket Arm — SW-MOTECH, Black, Aluminum, CPA.00.424.18000/B

Pivotable and rotatable socket arm for 1" diameter ball adapters. Pivot in two axes (up to 90° or 45°). Length: 5.5 cm. Compatible with TomTom Rider, Garmin Zumo and Blaupunkt MotoPilot.

€10.03 €12.61

-€3.79

SW-MOTECH Cockpit Switch — 12 V

Splash-proof handlebar on/off switch in compact, break-proof plastic casing; 30 cm cable; 1 x Cockpit switch included.

€14.70 €18.49

-€1.38

SW-MOTECH Adapter Kit for Garmin Zumo — Black

Adapter kit for Garmin Zumo 340/345/350/390/395/590/595/660 to fit QUICK-LOCK and Nonshock GPS mounts. Includes instructions and mounting hardware. Not compatible with Garmin 396.

€5.34 €6.72

1" Ball Kit for Mirror Thread — M8/M10 thread

-€4.29

SW-MOTECH 1" Ball Kit for Mirror Thread — M8/M10 thread

1" ball kit for attaching GPS devices to mirror threads with M8 or M10. Includes ball adapter, mounting plate, instructions and mounting hardware.

€16.72 €21.01

1" Ball Kit for Mirror Thread — 1" ball, fits M8/M10

-€4.29

SW-MOTECH 1" Ball Kit for Mirror Thread — 1" ball, fits M8/M10

1" ball adapter for mirror threads (M8/M10). Mounts between mirror and bar mount. Includes adapter, mounting plate, instructions and mounting hardware.

€16.72 €21.01

-€10.35

SW-MOTECH Universal GPS Mount Kit — Black

Installation kit for GPS devices with multiple mounting options. Includes Navi Case and hardware.

€21.79 €32.14

-€1.11

RAM MOUNTS X-Grip® Replacement Tether — Black, Universal compatibility

Replacement tether for RAM® X-Grip® phone holders that secures device edges for added retention in demanding conditions.

€4.28 €5.39

X-Grip® Replacement Post Caps — 4 pack, red, flat finish

-€1.43

RAM MOUNTS X-Grip® Replacement Post Caps — 4 pack, red, flat finish

Set of replacement post caps for the RAM X-Grip holder; super glue included for installation.

€5.57 €7.00

-€8.60

SW-MOTECH 1" Ball for GoPro Camera — 1", Black

1" ball adapter for mounting GoPro cameras on a 1" ball pivot arm. Includes mounting material and instructions.

€33.42 €42.02

-€10.32

SW-MOTECH Universal GPS Mount Kit — Black

Flexible universal mounting kit for GPS units; includes Navi Case and hardware for multiple installation options.

€40.10 €50.42

-€4.29

SW-MOTECH Ram Extension — Ram arm, black

Extends Ram 1 inch ball systems with a second arm for improved positioning.

€16.72 €21.01

-€30.02

KHROME WERKS [object Object]

Durable 1" handlebar made from 14-gauge steel tubing. Manufactured in the U.S.A. for reliable quality.

€116.75 €146.77

-€23.58

KHROME WERKS [object Object]

1" handlebar constructed from 14-gauge steel tubing. Made in the U.S.A.

€91.72 €115.30

-€23.58

KHROME WERKS [object Object]

Durable 1" handlebar made from 14-gauge steel tubing. Made in the U.S.A.

€91.72 €115.30

Murdock Handlebar Risers — 15 cm (6"), 25.4 mm (1") clamp, satin black

-€74.32

BILTWELL Murdock Handlebar Risers — 15 cm (6"), 25.4 mm (1") clamp,...

Investment-cast top clamp with TIG-welded chromoly uprights; fits many stock Harley speedo/tach brackets and 1" bars.

€210.06 €284.38

-€23.58

KHROME WERKS [object Object]

1" handlebar made from 14-gauge steel tubing. Made in the U.S.A.

€91.72 €115.30

X-Grip® Mount Kit — U-bolt mount, black powder-coated, universal large-device fit

-€21.28

RAM MOUNTS X-Grip® Mount Kit — U-bolt mount, black powder-coated,...

Secure, adjustable phone/device mount with patented 1" rubber ball-and-socket; spring-loaded holder and rubber-coated tips. Includes mounting hardware. Made in USA.

€82.76 €104.04

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls