Handlebars & Controls (2)

1-1/4" V-Line Handlebar — 32 mm (1-1/4") clamping diameter, 77.5 cm (30-1/2") width, 11.5 cm (4-1/2") rise

-€92.58

TRASK 1-1/4" V-Line Handlebar — 32 mm (1-1/4") clamping diameter,...

Seamless DOM mild steel construction, pre-drilled for internal wiring, notched for throttle-by-wire, made in the U.S.A.

€360.06 €452.64

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1" clamp, 32-1/4" width, 8-1/2" rise

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for throttle-by-wire.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4" width

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4"...

Seamless DOM steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90 cm width, Chrome

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90...

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for TBW. Made in the USA.

€370.25 €465.45

Hole Shot Risers — 10" rise, 1" clamping diameter, 3-1/2" center spacing, Black

-€115.04

THRASHIN SUPPLY CO. Hole Shot Risers — 10" rise, 1" clamping diameter, 3-1/2"...

Billet 6061 aluminum risers drilled for internal wiring; sold in pairs with clamp and hardware; fits 3-1/2" center spacing.

€325.48 €440.52

Tab-Lock™ Spring Loaded Holder — Fits large devices, AMPS hole mount, Black

-€16.29

RAM MOUNTS Tab-Lock™ Spring Loaded Holder — Fits large devices, AMPS hole...

Spring-loaded tablet holder with locking mechanism and adjustable support cups for various device sizes.

€63.34 €79.63

Hole Shot Risers — 8" rise, 1" clamp, 3-1/2" center spacing, chrome

-€112.21

THRASHIN SUPPLY CO. Hole Shot Risers — 8" rise, 1" clamp, 3-1/2" center spacing,...

Billet 6061 aluminum risers drilled for internal wiring; sold in pairs with top clamp and hardware. Fits 3-1/2" center-on-center riser spacing, including many OE Harley-Davidson models.

€317.11 €429.32

Street Glide Riser Adapter — Rise 2-3/8" , Pullback 1-5/8" , 1/2-13 thread

-€63.69

THRASHIN SUPPLY CO. Street Glide Riser Adapter — Rise 2-3/8" , Pullback 1-5/8" ,...

Adapter for use with Thrashin® Risers that raises and repositions the riser mounting point; includes necessary hardware and is made in USA.

€179.99 €243.68

-€25.89

THRASHIN SUPPLY CO. Master Cylinder Cover — Black, Silver

Precision-machined master cylinder cover. Hardware included. Reuses factory OEM gasket.

€73.24 €99.13

1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width, 8-1/2" rise

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width, 8-1/2"...

Seamless DOM steel construction, pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — Chrome, 37-1/2" W, 8-1/2" Rise

-€95.20

TRASK 1-1/4" V-Line Handlebar — Chrome, 37-1/2" W, 8-1/2" Rise

Classic V-Line handlebar, pre-drilled and notched for TBW, built for lasting performance.

€370.25 €465.45

-€7.95

THRASHIN SUPPLY CO. Bolt Grips — 25.4 mm (1"), Brown

Slim, textured motorcycle grips that reduce vibration and improve control.

€22.47 €30.42

Bolt Grips — 1" (25.4 mm) handlebar, Flat Green

-€8.54

THRASHIN SUPPLY CO. Bolt Grips — 1" (25.4 mm) handlebar, Flat Green

Slim, fully textured grips that reduce vibration and improve control, made from a durable proprietary compound.

€24.14 €32.68

X-Grip® Large Phone Mount with Stubby™ Cup Holder Base — fits 2.57"–3.5" cup holders, Black

-€16.25

RAM MOUNTS X-Grip® Large Phone Mount with Stubby™ Cup Holder Base — fits...

Secure spring-loaded X-Grip® phone holder with Stubby™ cup holder ball base and medium B-length double socket arm for easy, tool-free installation in most cup holders.

€63.22 €79.47

Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-13 thread, 3" length, Chrome

-€20.44

ALLOY ART Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-13...

Includes Gooden Tight™ riser bushings, flathead mounting bolts and billet washers.
Special cup washers conceal bolt heads for a clean installation.
Made in the USA.

€57.75 €78.19

Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-20 thread, 3" length, Chrome

-€20.44

ALLOY ART Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-20...

Includes Gooden Tight™ riser bushings, flathead bolts, billet and cup washers; made in the USA.

€57.75 €78.19

-€72.04
New
Out of Stock

TRASK TRASK RISERS ASSULT 2 X1 RC — Black

RISERS ASSULT 2 X1 RC

€280.15 €352.19

-€44.53

KIBBLEWHITE Cylinder Stud Kit — 8-pack, Black

Precision-ground studs with radius-ground thread ends and hydraulically rolled threads for maximum strength and reduced notch sensitivity.

€125.97 €170.50

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

Master Cylinder Cover — Chrome, Aluminum

-€25.89

THRASHIN SUPPLY CO. Master Cylinder Cover — Chrome, Aluminum

6061 aircraft-grade aluminum cover, hardware included, reuses OEM gasket.

€73.24 €99.13

-€25.89

THRASHIN SUPPLY CO. Brake Reservoir Cap — Black, Rear

Secure replacement reservoir cap. Hardware included; reuses factory OEM gasket. Easy, quick installation.

€73.24 €99.13

-€27.46

THRASHIN SUPPLY CO. Brake Reservoir Cap — Chrome, Rear

Includes mounting hardware and reuses the factory OEM gasket for a reliable seal.

€77.72 €105.18

1" Handlebar — 25.4 mm clamp, 31 in width, 4 in rise, 25° sweep, Polished

-€59.60

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 31 in width, 4 in rise, 25°...

Thrashin® 1" handlebar with laser-etched logo and drilled routing for internal wiring. TBW keyholes accommodate late-style fitments; knurled center for secure clamp grip.

€168.45 €228.05

1" Handlebar — 25.4 mm (1") clamp, 4" rise, 32" width, 25° sweep, polished

-€58.15

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm (1") clamp, 4" rise, 32" width, 25°...

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; throttle-by-wire keyholes; knurled center for clamp grip; made in the United States.

€164.34 €222.49

1" Handlebar — 1" diameter, 32" width, 5-1/2" rise, 20° sweep, Polished

-€59.60

THRASHIN SUPPLY CO. 1" Handlebar — 1" diameter, 32" width, 5-1/2" rise, 20° sweep,...

Laser-etched Thrashin® logo, pre-drilled for internal wiring, knurled center for clamp grip, TBW keyholes.

€168.45 €228.05

1" Handlebar — Black, 32" width, 5-1/2" rise, 20° pullback

-€54.73

THRASHIN SUPPLY CO. 1" Handlebar — Black, 32" width, 5-1/2" rise, 20° pullback

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; Throttle-By-Wire keyholes; knurled center for maximum clamp grip; made in U.S.A.

€154.67 €209.40

1" Handlebar — Chrome, 32" width, 1" clamp

-€59.60
Out of Stock

THRASHIN SUPPLY CO. 1" Handlebar — Chrome, 32" width, 1" clamp

Knurled, pre-drilled handlebar with TBW keyholes and laser-etched Thrashin® logo for clean internal wiring and late-style fitments.

€168.45 €228.05

1" Handlebar — 25.4 mm (1"), 32" (81.5 cm) width, 4" (10 cm) rise, Black

-€54.73

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm (1"), 32" (81.5 cm) width, 4" (10 cm)...

Pre-drilled and slotted for internal wiring.
Laser-etched Thrashin® logo.
Knurled center for maximum clamp grip.
Includes Throttle-By-Wire keyholes; cable-throttle bikes require TBW handlebar plug.

€154.67 €209.40

1" Handlebar — 25.4 mm (1"), 81.5 cm (32"), 10 cm (4")

-€59.60

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm (1"), 81.5 cm (32"), 10 cm (4")

Laser-etched Thrashin® logo, drilled and slotted for internal wiring, knurled center, TBW keyholes, made in U.S.A.

€168.45 €228.05

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls