Handlebars & Controls (18)

1-1/2" "Big" Buffalo Bar — width 30-1/2", rise 12"

-€81.31

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — width 30-1/2", rise 12"

Classic T-bar Big Buffalo handlebars with custom bends for long-ride comfort. For use with most '99+ Harley-Davidson models.

€229.77 €311.08

1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2") diameter, 14" rise, 30-1/2" width

-€81.31

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2") diameter, 14" rise,...

Big Buffalo bar with custom bends for comfort; pre-drilled and ready for heated grips and hydraulic clutch; fits most '99+ Harley-Davidson models.

€229.77 €311.08

1-1/2" "Big" Buffalo Bar — 1-1/2" diameter, 14" rise, 30-1/2" width, black

-€81.31

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 1-1/2" diameter, 14" rise, 30-1/2"...

Custom-bent Big Buffalo handlebar for a bold, fat look; fits most '99+ Harley-Davidson models. Made in the U.S.A.

€229.77 €311.08

-€35.84
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly, fully assembled for easy installation.

€101.31 €137.15

Rear Brake Master Cylinder Cover Kit — Chrome, Rear

-€11.50

DRAG SPECIALTIES Rear Brake Master Cylinder Cover Kit — Chrome, Rear

Precision-machined reservoir cap includes gasket and mounting screws for easy installation.

€32.55 €44.05

Front Brake Master Cylinder Assembly — 15 mm bore, 25.4 mm clamp (1") , Black

-€59.41

DRAG SPECIALTIES Front Brake Master Cylinder Assembly — 15 mm bore, 25.4 mm...

Includes lever and clamp half. Compatible with DOT 4 and DOT 5 brake fluid. Fits 1" and 1-1/4" handlebars.

€167.91 €227.32

-€27.64
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4") bore, chrome polished

Complete rear master cylinder assembly, fully assembled for easy installation.

€78.10 €105.74

Rear Brake Master Cylinder Cover Kit — Chrome, 78073C

-€8.31

DRAG SPECIALTIES Rear Brake Master Cylinder Cover Kit — Chrome, 78073C

Enhances protection and appearance of the brake fluid reservoir. Includes gasket and mounting screws.

€23.47 €31.78

-€11.08

DRAG SPECIALTIES Solo Rear Master Cylinder Rebuild Kit — 14 mm (9/16"), Black

Custom rebuild kit with seals, springs, guides and snap ring. Mounting holes 1-3/16" center-to-center.

€31.33 €42.41

-€48.34

DRAG SPECIALTIES Rear Brake Master Cylinder — Silver

Complete, fully assembled rear master cylinder ready to install and restore braking performance.

€136.59 €184.93

-€48.34

DRAG SPECIALTIES Rear Brake Master Cylinder — Rear, Black

Complete rear master cylinder assembly, fully assembled for easy installation.

€136.59 €184.93

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome polished$

-€47.56

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome...

Complete rear master cylinder assembly; fully assembled for easy installation. Ideal for maintenance and replacement.

€134.42 €181.98

Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

-€47.56

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

Complete brake assembly, fully assembled for easy installation and quick replacement.

€134.42 €181.98

Rear Brake Master Cylinder Rebuild Kit — 19.1 mm (3/4"), Rear, Black/Silver

-€9.24

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — 19.1 mm (3/4"), Rear,...

Rebuild kit for rear brake master cylinders; fits various H-D models, meets or exceeds OEM specs, includes metal piston.

€26.11 €35.35

-€42.75

DRAG SPECIALTIES Rear Brake Master Cylinder — Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€120.82 €163.57

-€42.75

DRAG SPECIALTIES Rear Brake Master Cylinder — Black, B17-655MB

Complete hydraulic assembly, fully assembled for fast installation.

€120.82 €163.57

-€6.90

DRAG SPECIALTIES Rear Master Cylinder Cover — Blue, Chrome

Precision accessory that protects the master cylinder reservoir with a low-profile design and easy installation.

€19.55 €26.45

-€4.41

DRAG SPECIALTIES Rear Master Cylinder Cover — Black

Precision-machined protector for the brake fluid reservoir. Bolt-on installation using existing hardware; durable finish and reliable sealing.

€12.50 €16.91

-€6.90

DRAG SPECIALTIES Rear Master Cylinder Cover — Black

Protects the hydraulic control assembly from debris and moisture. Precision-fit with a corrosion-resistant finish. Easy bolt-on installation.

€19.55 €26.45

Cut-Down Front Brake Master Cylinder — 17.5 mm bore, 25.4 mm clamp

-€54.65

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 17.5 mm bore, 25.4 mm...

Chrome die-cast aluminum master cylinder cut down 0.256" for a lower profile; includes chrome mounting clamp and brake lever. Not for use with 1-1/4"/1-1/2" handlebars that are not clearanced.

€154.48 €209.13

Cut-Down Front Brake Master Cylinder — 14.3 mm (9/16") bore, 25.4 mm (1") clamp, Chrome

-€53.33
Out of Stock

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 14.3 mm (9/16") bore,...

Cut-down front brake master cylinder reduced 0.256" for a lower lever profile; includes mounting clamp and brake lever. Not for use with non-clearanced 1-1/4"/1-1/2" handlebars.

€150.70 €204.03

Cut-Down Front Brake Master Cylinder — 15.9 mm (5/8"), 25.4 mm (1"), Chrome

-€54.65

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 15.9 mm (5/8"), 25.4 mm...

Chrome die-cast aluminum master cylinder, cut down for a lower profile; includes chrome clamp and brake lever. Not for use with handlebars without clearance.

€154.48 €209.13

-€10.04
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Left upper mount, 2-button, Chrome

OEM-replacement switch kit with color-coded leads and black protective sleeves; 60" leads; individual switches available separately; meets or exceeds OEM specifications; fits USA and international models.

€28.35 €38.39

-€10.78

DRAG SPECIALTIES Handlebar Switch Kit — Chrome, right upper mount

OEM-replacement switch kit with color-coded leads and black protective sleeves; 60" leads; individual switches sold separately.

€30.45 €41.23

-€4.69

DRAG SPECIALTIES Turn Signal Switch Extension — Chrome

Improves reach and operation with quick, tool-free installation.

€13.24 €17.93

-€4.21

DRAG SPECIALTIES Turn Signal Switch Extension — Black

Updates switch caps for improved reach and ergonomics. Quick, easy installation.

€11.92 €16.13

-€6.85
Out of Stock

DRAG SPECIALTIES Master Cylinder Boots — Rear, Black, 5 Pack

Replacement boots that seal and protect rear master cylinder internals.

€19.39 €26.24

Clutch/Brake Cable Anchor Pin and Bushing — Pivot pin, 12 pack, polished silver

-€6.61

DRAG SPECIALTIES Clutch/Brake Cable Anchor Pin and Bushing — Pivot pin, 12...

Replacement anchor pin and plastic bushings for early-style clutch and brake levers.

€18.66 €25.27

-€4.19

DRAG SPECIALTIES SEATS Leather Lever Covers — Black

Handcrafted covers for clutch and brake levers; set includes laces, beads and instructions. Fits larger-size stock or custom cruiser-style levers; not for wide-blade levers. Matches our grip covers.

€11.82 €16.01

-€9.08

DRAG SPECIALTIES Handlebar Switch Button Caps — 25.4 mm (1"), Chrome, 10 Pack

Durable molded-plastic caps for handlebar switch buttons. Sold individually; bulk packs available for dealers.

€25.66 €34.74

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls