Handlebars & Controls (17)

$Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\") clamp, Chrome$

-€43.33

DRAG SPECIALTIES Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\")...

Aluminum handlebar control kit. Uses OEM or equivalent switches (switches not included). Replacement parts sold separately.

€122.49 €165.82

Handlebar Switch Housing Kit — 1" (25.4 mm), Chrome

-€4.13

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" (25.4 mm), Chrome

Accepts OEM-style switches and wiring.

Switches and switch clamps sold separately.

€11.66 €15.79

Handlebar Switch Housing Kit — 25.4 mm (1"), Chrome

-€4.53

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1"), Chrome

Handlebar switch housing kit accepts OEM-style switches and wiring. Brake and clutch controls, switches, and clamps are sold separately.

€12.84 €17.37

-€4.70

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" handlebar, chrome

Polished brake and clutch controls with die-cast switch housings; accepts OEM-style switches and wiring. Switches and clamps sold separately.

€13.26 €17.96

-€5.34

DRAG SPECIALTIES Clutch Lever Bracket — Left, Chrome

Precision clutch lever bracket providing dependable actuation and straightforward installation.

€15.07 €20.41

-€4.10

DRAG SPECIALTIES Replacement Master Cylinder Cap — Rear, Chrome

Replacement cap for brake master cylinders that restores a secure fluid seal and resists corrosion.

€11.63 €15.73

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€77.33

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€218.55 €295.88

-€62.86

DRAG SPECIALTIES Cylinder — 1200 cc, 3.435" bore, rear

Cast-iron construction meets or exceeds OEM tolerances; resists higher pressure and heat than stock.

€177.65 €240.51

$Cylinder — 1200 cc, bore 3.435\", front, Black$

-€64.43

DRAG SPECIALTIES Cylinder — 1200 cc, bore 3.435\", front, Black

Cast-iron cylinder that meets or exceeds OEM tolerances and withstands greater pressure and heat than stock.

€182.09 €246.52

-€53.06

DRAG SPECIALTIES Cylinder — 3.435" bore, 74 ci, Black

Cast-iron cylinder that meets or exceeds OEM tolerances. Withstands greater pressure and heat than stock components.

€149.97 €203.03

-€57.43

DRAG SPECIALTIES Cylinder — 3.435", 74"

Cast-iron cylinder meets or exceeds OEM tolerances and resists higher pressure and heat for improved durability.

€162.27 €219.70

1" Ape Hanger Handlebar — Rise 10", Width 38", Clamp 1", Chrome

-€45.03

DRAG SPECIALTIES 1" Ape Hanger Handlebar — Rise 10", Width 38", Clamp 1", Chrome

Knurled, slotted Ape Hanger handlebar with internal wiring and OEM heated-grip compatibility. Made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, gloss black

-€35.75

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, gloss...

Seamless tubing with a knurled, slotted center; internal wiring ready and accepts OEM heated grips.

€101.02 €136.77

1" Ape Hanger Handlebar — 12" rise, 38" width

-€45.03

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 12" rise, 38" width

Seamless steel ape hanger with knurled center and internal wiring; accepts OEM heated grips.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 12" rise, 38" width

-€35.75

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 12" rise, 38" width

Seamless steel ape hanger with knurled center and slotted internal wiring; accepts OEM heated grips. Made in USA.

€101.02 €136.77

1" Ape Hanger Handlebar — 14" rise, 13" center width, 1" clamp diameter

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 14" rise, 13" center width, 1" clamp...

Seamless steel tubing ape hanger with knurled center, slotted for internal wiring and compatible with heated grips.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width

-€35.75

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width

A classic ape hanger shape with knurled, slotted center for internal wiring; accepts OEM heated grips and built from seamless steel tubing.

€101.02 €136.77

1" Ape Hanger Handlebar — 16" rise, 1" clamp, 38" width, Chrome

-€45.03

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 16" rise, 1" clamp, 38" width, Chrome

Seamless steel ape hanger handlebar with knurled center and slots for internal wiring; accepts OEM heated grips.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width, Chrome

-€45.03

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width, Chrome

Ape Hanger handlebar with knurled center and slotted design for internal wiring, compatible with OEM heated grips. Made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width

-€35.75

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width

Seamless, knurled Ape Hanger handlebar with slots for internal wiring and support for OEM heated grips.

€101.02 €136.77

Buck-50 Handlebar — 36-5/8" width, 9-1/2" rise, 1-1/2" diameter, 1" clamp, Chrome

-€106.66

KHROME WERKS Buck-50 Handlebar — 36-5/8" width, 9-1/2" rise, 1-1/2"...

Stepped Buck-50 handlebar with knurled center and notched throttle-by-wire; fits factory heated grips and installs without fairing modifications.

€414.80 €521.46

Buck-50 Handlebar — 25.4 mm clamp, 38 mm bar, 93.5 cm width, 29 cm rise, Chrome

-€106.66

KHROME WERKS Buck-50 Handlebar — 25.4 mm clamp, 38 mm bar, 93.5 cm width,...

Aggressive ape-hanger style with stepped design, clean wiring cutouts, diamond-knurled center, and factory heated-grip compatibility.

€414.80 €521.46

$Buck-50 Handlebar — 1-1/4\" clamp, 1-1/2\" diameter, 35-1/8\" width, 10\" rise, Chrome$

-€106.66

KHROME WERKS Buck-50 Handlebar — 1-1/4\" clamp, 1-1/2\" diameter, 35-1/8\"...

Stepped design fits factory clamp and perches; notched for throttle-by-wire; diamond-knurled center for no-slip clamping; accepts H-D OEM heated grips.

€414.80 €521.46

Buck-50 Handlebar — 90 cm (35.5") width, 30 cm rise, 32 mm clamp, Chrome

-€106.66

KHROME WERKS Buck-50 Handlebar — 90 cm (35.5") width, 30 cm rise, 32 mm...

Stepped design for factory clamp and perches; aggressive riding position; clean cutouts for easy wiring; notched for throttle-by-wire; diamond-knurled center; accepts heated grips.

€414.80 €521.46

Buck-50 Handlebar — 36-7/8" W, 11-1/2" rise, 1-1/2" dia, 1" clamp, Black gloss

-€106.66

KHROME WERKS Buck-50 Handlebar — 36-7/8" W, 11-1/2" rise, 1-1/2" dia, 1"...

Stepped design for factory clamp and perches, notched for throttle-by-wire, diamond-knurled center, accepts factory and H-D OEM heated grips.

€414.80 €521.46

Buck-50 Handlebar — 89 cm (35-1/8") width, 25 cm (9-3/4") rise, 32 mm clamp

-€106.66

KHROME WERKS Buck-50 Handlebar — 89 cm (35-1/8") width, 25 cm (9-3/4")...

Stepped design for use with factory clamp and perches, notched for electronic throttle control, and diamond knurling for no-slip clamping. Made in the USA.

€414.80 €521.46

1" Handlebar w/ TBW Plugs — 1" clamp, 30-1/2" width, Black

-€42.43

BILTWELL 1" Handlebar w/ TBW Plugs — 1" clamp, 30-1/2" width, Black

Tracker-style 1" handlebar with removable bar-end plug for TBW compatibility, milled routing slots and precision TIG welding.

€119.91 €162.34

1" Handlebar w/ TBW Plugs — 30.5" width, 25.4 mm (1") clamp, 3-1/4" rise, chromoly

-€42.43

BILTWELL 1" Handlebar w/ TBW Plugs — 30.5" width, 25.4 mm (1") clamp,...

Reinforced 1" chromoly handlebar with TBW-ready bar end plug, mandrel-bent tubing, milled slots for internal routing, and TIG-welded joints.

€119.91 €162.34

1" Handlebar w/ TBW Plugs — 30-1/2" width, 1" clamp, 3-1/4" rise, Chrome

-€47.77
Out of Stock

BILTWELL 1" Handlebar w/ TBW Plugs — 30-1/2" width, 1" clamp, 3-1/4"...

Injection-molded plug for TBW compatibility, 0.120" chromoly construction, mandrel-bent tubing, milled slots for internal routing, and TIG-welded joints.

€135.01 €182.78

1" Handlebar w/ TBW Plugs — 30" width, 1" clamp, 4-1/2" rise, Chrome

-€47.77

BILTWELL 1" Handlebar w/ TBW Plugs — 30" width, 1" clamp, 4-1/2" rise,...

TBW-compatible handlebar with a removable plug for single- and dual-cable throttles.

Milled slots for clean internal wire routing; precision mandrel-bent and TIG welded construction.

€135.01 €182.78

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls