Handlebars & Controls (15)

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, Chrome

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal Viking design for easy full-harness routing; preloaded with E‑Z pull‑thru sleeving; CNC mandrel bends and machined control mounts.

€366.17 €463.64

1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 1" clamp, 3-1/2" knurl

-€93.30

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 1"...

Patented internal design for easy wiring installations, preloaded E-Z sleeving, CNC mandrel bends, machined mounts, and high-luster finish.

€362.88 €456.18

-€6.68
Out of Stock

DRAG SPECIALTIES Replacement Gaskets — Master cylinder, Rear, 5-pack, Black

Durable replacement gaskets for brake cover kits that prevent leaks and ensure a proper seal.

€18.90 €25.58

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, Chrome

Patented internal routing and preloaded E-Z sleeving for simple wiring installations; CNC mandrel bends and machined mounts with high-luster finish. Not for use with stock risers on 883C and 1200C.

€366.17 €463.64

1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center width, Chrome

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center width,...

Patented internal routing and E‑Z pull‑thru sleeving for easy wiring installs; CNC mandrel bends and machined control mounts; high-luster chrome finish. Not for stock risers on 883C/1200C.

€366.17 €463.64

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2" width

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2"...

Patented Viking internal design for easy wiring harness installation, preloaded with E-Z pull-thru sleeving; machined mounts and high-luster finish.

€329.50 €417.21

1-1/4" Viking Handlebar — 32 mm (1-1/4") diameter, 25.4 mm (1") center clamp, 19.5 cm (7-3/4") center width, Black gloss

-€103.70

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4") diameter, 25.4 mm...

Patented internal wiring channel for easy harness installation. Preloaded with E‑Z pull‑thru sleeving. CNC mandrel bends and machined control mounts. Not compatible with stock risers or clamp-on assemblies on 883C and 1200C.

€403.28 €506.98

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 1" clamp, Black gloss

-€96.99

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal routing and preload E‑Z sleeving make wiring harness installations fast and clean.

€364.35 €461.34

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 3-1/2" clamp width, gloss black

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal wiring channel for clean installations, preloaded E‑Z sleeving, CNC mandrel bends and machined control mounts. Not compatible with stock risers on 883C and 1200C.

€329.50 €417.21

-€27.64
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4") bore, chrome polished

Complete rear master cylinder assembly, fully assembled for easy installation.

€78.10 €105.74

1-1/4" Viking Handlebar — 1-1/4" dia, 1" center section, 14" rise, 35-1/4" width

-€96.99

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 1" center section, 14"...

Patented internal design for easy wiring installations; preloaded E‑Z pull‑thru sleeving; CNC mandrel bends and machined control mounts. Not for use with stock risers on 883C and 1200C.

€364.35 €461.34

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 16" rise

-€96.99

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal design for easier wiring installations; preloaded with E-Z pull-thru sleeving, knurled center, and machined control mounts for a high-luster finish.

€364.35 €461.34

Rear Brake Master Cylinder Cover Kit — Chrome, 78073C

-€8.31

DRAG SPECIALTIES Rear Brake Master Cylinder Cover Kit — Chrome, 78073C

Enhances protection and appearance of the brake fluid reservoir. Includes gasket and mounting screws.

€23.47 €31.78

Solo Custom Mini Rear Master Cylinder Kit — 14 mm bore, 1-3/16" c-c mount, anodized black

-€43.25

DRAG SPECIALTIES Solo Custom Mini Rear Master Cylinder Kit — 14 mm bore,...

Compact custom brake solution for tight installations with a sleek profile and included mounting hardware.

€122.23 €165.48

-€11.08

DRAG SPECIALTIES Solo Rear Master Cylinder Rebuild Kit — 14 mm (9/16"), Black

Custom rebuild kit with seals, springs, guides and snap ring. Mounting holes 1-3/16" center-to-center.

€31.33 €42.41

-€48.34

DRAG SPECIALTIES Rear Brake Master Cylinder — Silver

Complete, fully assembled rear master cylinder ready to install and restore braking performance.

€136.59 €184.93

-€48.34

DRAG SPECIALTIES Rear Brake Master Cylinder — Rear, Black

Complete rear master cylinder assembly, fully assembled for easy installation.

€136.59 €184.93

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome polished$

-€47.56

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome...

Complete rear master cylinder assembly; fully assembled for easy installation. Ideal for maintenance and replacement.

€134.42 €181.98

Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

-€47.56

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

Complete brake assembly, fully assembled for easy installation and quick replacement.

€134.42 €181.98

Rear Brake Master Cylinder Rebuild Kit — 19.1 mm (3/4"), Rear, Black/Silver

-€9.24

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — 19.1 mm (3/4"), Rear,...

Rebuild kit for rear brake master cylinders; fits various H-D models, meets or exceeds OEM specs, includes metal piston.

€26.11 €35.35

-€42.75

DRAG SPECIALTIES Rear Brake Master Cylinder — Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€120.82 €163.57

-€42.75

DRAG SPECIALTIES Rear Brake Master Cylinder — Black, B17-655MB

Complete hydraulic assembly, fully assembled for fast installation.

€120.82 €163.57

-€6.90

DRAG SPECIALTIES Rear Master Cylinder Cover — Blue, Chrome

Precision accessory that protects the master cylinder reservoir with a low-profile design and easy installation.

€19.55 €26.45

-€4.41

DRAG SPECIALTIES Rear Master Cylinder Cover — Black

Precision-machined protector for the brake fluid reservoir. Bolt-on installation using existing hardware; durable finish and reliable sealing.

€12.50 €16.91

-€6.90

DRAG SPECIALTIES Rear Master Cylinder Cover — Black

Protects the hydraulic control assembly from debris and moisture. Precision-fit with a corrosion-resistant finish. Easy bolt-on installation.

€19.55 €26.45

Cut-Down Front Brake Master Cylinder — 17.5 mm bore, 25.4 mm clamp

-€54.65

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 17.5 mm bore, 25.4 mm...

Chrome die-cast aluminum master cylinder cut down 0.256" for a lower profile; includes chrome mounting clamp and brake lever. Not for use with 1-1/4"/1-1/2" handlebars that are not clearanced.

€154.48 €209.13

Cut-Down Front Brake Master Cylinder — 14.3 mm (9/16") bore, 25.4 mm (1") clamp, Chrome

-€53.33
Out of Stock

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 14.3 mm (9/16") bore,...

Cut-down front brake master cylinder reduced 0.256" for a lower lever profile; includes mounting clamp and brake lever. Not for use with non-clearanced 1-1/4"/1-1/2" handlebars.

€150.70 €204.03

Cut-Down Front Brake Master Cylinder — 15.9 mm (5/8"), 25.4 mm (1"), Chrome

-€54.65

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 15.9 mm (5/8"), 25.4 mm...

Chrome die-cast aluminum master cylinder, cut down for a lower profile; includes chrome clamp and brake lever. Not for use with handlebars without clearance.

€154.48 €209.13

-€6.63

DRAG SPECIALTIES Handlebar Switch Kit — Right lower, 1-button, Chrome, H18-0333C-R

OEM-replacement handlebar switch kit with color-coded leads and black protective sleeves; 60-inch leads. Individual switches sold separately.

€18.75 €25.38

-€10.04
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Left upper mount, 2-button, Chrome

OEM-replacement switch kit with color-coded leads and black protective sleeves; 60" leads; individual switches available separately; meets or exceeds OEM specifications; fits USA and international models.

€28.35 €38.39

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls