Handlebars & Controls (12)

$1-1/4\" Touring Handlebar — 32 mm clamping, 33\" width, 17\" rise, Chrome$

-€91.12

TODD'S CYCLE 1-1/4\" Touring Handlebar — 32 mm clamping, 33\" width, 17\"...

Knurled center, OEM fitment, adjustable with hydraulic clutch compatibility.

€354.35 €445.47

1-1/4" Touring Handlebar — 17" rise, 33" width, Black

-€83.20

TODD'S CYCLE 1-1/4" Touring Handlebar — 17" rise, 33" width, Black

1-1/4" diameter in the clamping area
Knurled clamping area for secure fit
Works with OEM risers and clamps; correct wire exit
Over 35° of adjustment; compatible with hydraulic clutches
Made in the U.S.A.; accepts heated grips

€323.52 €406.72

Reversible Moto Handlebar Pad — 21 cm (8-1/4"), 22 mm (7/8"), black/white

-€4.17

BILTWELL Reversible Moto Handlebar Pad — 21 cm (8-1/4"), 22 mm (7/8"),...

Double-sided pad for quick style changes with a low-profile, wrap-on design that stays secure.

€11.78 €15.95

-€4.76
Out of Stock

KURYAKYN Universal Throttle Boss — Black, XL

Adjustable paddle under the palm holds a steady throttle; installs and removes without tools.

€18.50 €23.26

ISO®-Grips for Harley — 25.4 mm (1 in), Black, Chrome

-€22.27
Out of Stock

KURYAKYN ISO®-Grips for Harley — 25.4 mm (1 in), Black, Chrome

Styled ISO® grips that reduce vibration, allow airflow between ISO®-Pads, and accept the ISO®-Throttle Boss (sold separately).

€86.63 €108.90

-€2.27
Out of Stock

KURYAKYN Handlebar Mount Shim Kit — 22 mm (7/8 in), raw finish

Two-piece shim kit lets 1" clamp accessories fit 7/8" handlebars without modification.

€8.84 €11.11

-€11.37
Out of Stock

KURYAKYN Rear Master Cylinder Cover — Chrome

Simple, two-fastener installation. Fits over stock lid and body for a clean finish.

€44.24 €55.61

-€31.52

TODD'S CYCLE Master Cylinder Reservoir — Anodized black

CNC-machined aluminum master cylinder reservoir with rubber diaphragm, universal bracket, and hydraulic line; made in the USA.

€122.53 €154.05

-€29.24

TODD'S CYCLE Master Cylinder Reservoir — Hydraulic, Silver

Precision CNC-machined unit with included elastomer diaphragm, universal bracket, and fluid line. Made in the USA.

€113.69 €142.93

-€20.27
Out of Stock

KURYAKYN Chrome Switch Housing — 25.4 mm (1")

Chrome finish and smooth lines enhance stock controls.

Hidden fasteners for a sleek, finished look.

Accepts stock H-D switches (not included).

€78.83 €99.10

-€44.53

KIBBLEWHITE Cylinder Stud Kit — 8-pack, Black

Precision-ground studs with radius-ground thread ends and hydraulically rolled threads for maximum strength and reduced notch sensitivity.

€125.97 €170.50

1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise, Black gloss

-€49.39

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise,...

Cafe-style handlebars with billet end caps, slotted for internal wiring, fits 3-1/2" on-center risers. Made in the U.S.A.

€192.06 €241.45

-€49.39

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise

Cafe-style handlebar that creates a more aggressive riding position. Slotted for internal wiring, includes billet end caps, made in the U.S.A.

€192.06 €241.45

-€41.50

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, polished

Motocross-style, low-profile handlebar slotted for internal wiring. Smooth, unknurled surface. Made in the U.S.A.

€161.39 €202.89

1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1"), 88.9 mm (3-1/2") rise

-€36.81

TODD'S CYCLE 1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1"), 88.9 mm...

Motocross-style low-profile bar, slotted for internal wiring, no knurling, made in the USA.

€143.14 €179.95

1" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm (27-3/4") width, 20.5 cm (8") rise, Polished

-€41.50

TODD'S CYCLE 1" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm (27-3/4")...

Classic, minimalist beater handlebar with internal wiring slots and a narrow, low profile.

€161.39 €202.89

-€36.22

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Black

Classic, simple beater design
Straight, narrow style with measured pullback
Slotted for internal wiring
No knurling for a smooth finish
Made in the USA

€140.84 €177.06

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, Polished

-€70.84
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic, narrow beater-style handlebar with a comfortable wrist angle; slotted for internal wiring; made in the U.S.A.

€275.48 €346.32

1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width, Black

-€64.81

TODD'S CYCLE 1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width,...

Classic narrow beater bar with a comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€252.06 €316.87

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, 12 cm (4-3/4") pullback

-€68.06

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic beater-style handlebar: straight, narrow profile with a comfortable wrist angle and slotted wiring for a clean build.

€264.66 €332.72

-€61.52

TODD'S CYCLE 1-1/4" Beater Bar — 30-1/2" width, 1-1/4" clamp, polished

Classic, simple beater bar with a comfortable wrist angle. Slotted for internal wiring, pre-drilled and knurled at the center. Made in the U.S.A.

€239.20 €300.72

$1-1/4\" Beater Bar — 32 mm clamp, 77.5 cm width, 25.5 cm rise, Black gloss$

-€68.06

TODD'S CYCLE 1-1/4\" Beater Bar — 32 mm clamp, 77.5 cm width, 25.5 cm rise,...

Classic 1-1/4" Beater Bar with a straight, narrow profile and comfortable wrist angle. Slotted for internal wiring and pre-drilled for easy installation.

€264.66 €332.72

1-1/2" Strip Handlebar — 38 mm clamping, 28 cm rise, 81.5 cm width, Chrome

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 28 cm rise, 81.5 cm...

Strip-style handlebar with polished welds, internal wiring slots and throttle notch; requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 1-1/2" clamping diameter, 11" rise, 32" width, Flat Black

-€84.83

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping diameter, 11" rise,...

Strip-style handlebar with concealed wiring, polished welds and throttle notches. Requires special risers and clamps; works with OEM heated grips.

€329.90 €414.73

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 84.5 cm (33-1/4") width, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 84.5 cm...

Strip handlebar with polished welds, slotted for internal wiring, notched for electronic throttle, pre-drilled and compatible with OEM heated grips. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width, 38 cm (15") rise, black flat

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width,...

Strip-style handlebar with polished welds, internal wiring slots, and notched throttle cutout. Works with OEM heated grips and requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 89 cm (35") width, Chrome

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 89 cm (35")...

Strip-style handlebar with internal wiring routing, throttle notches, polished welds and pre-drilled controls. Requires special risers and clamps.

€346.41 €435.48

1" Handlebar w/ TBW Plugs — 1" clamp, 30-1/2" width, Black

-€42.43

BILTWELL 1" Handlebar w/ TBW Plugs — 1" clamp, 30-1/2" width, Black

Tracker-style 1" handlebar with removable bar-end plug for TBW compatibility, milled routing slots and precision TIG welding.

€119.91 €162.34

1" Handlebar w/ TBW Plugs — 30.5" width, 25.4 mm (1") clamp, 3-1/4" rise, chromoly

-€42.43

BILTWELL 1" Handlebar w/ TBW Plugs — 30.5" width, 25.4 mm (1") clamp,...

Reinforced 1" chromoly handlebar with TBW-ready bar end plug, mandrel-bent tubing, milled slots for internal routing, and TIG-welded joints.

€119.91 €162.34

1" Handlebar w/ TBW Plugs — 30" width, 1" clamp, 4-1/2" rise, Chrome

-€47.77

BILTWELL 1" Handlebar w/ TBW Plugs — 30" width, 1" clamp, 4-1/2" rise,...

TBW-compatible handlebar with a removable plug for single- and dual-cable throttles.

Milled slots for clean internal wire routing; precision mandrel-bent and TIG welded construction.

€135.01 €182.78

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls