Handlebars & Controls (12)

Can Bus Handlebar Control Module — 48" harness, Right mount, Black polished

-€33.71
Out of Stock

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, Right mount,...

Can Bus handlebar control module with compatible switch, long wiring harness and turn-signal reserve wire. IP66-rated; not for use on Softail models with cruise control.

€95.27 €128.98

1" Handlebar — 1" clamp, 29-1/2" width, 17" rise, Chrome

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 29-1/2" width, 17" rise, Chrome

Seamless steel tubing and a wide selection of bends deliver a precise fit and durable construction, made in the U.S.A.

€127.25 €172.28

Can Bus Handlebar Control Module — 48" harness, left mount, chrome

-€35.42
Out of Stock

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, left mount,...

Durable CAN bus handlebar switch module with IP66-rated connector. Not for use on Softail models with cruise control.

€100.10 €135.52

Can Bus Handlebar Control Module — 48" harness, left mount, Black polished

-€31.60
Out of Stock

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, left mount,...

Durable IP66-rated handlebar control module with sealed connector and integrated switch functions. Not for use with Softail models featuring cruise control.

€89.28 €120.88

-€6.49
Out of Stock

DRAG SPECIALTIES Handlebar Switch — Brake, front mount, black flat finish

Replacement component compatible with Harley Davidson Can Bus systems. Direct-fit design for simplified installation.

€18.33 €24.82

-€6.49
Out of Stock

DRAG SPECIALTIES Handlebar Switch — Clutch, front mount, black, flat

Replacement switch for Harley Davidson Can Bus systems. Fits front-handlebar installations; plug-and-play compatibility.

€18.33 €24.82

1" Handlebar — Clamping diameter 25.4 mm (1"), width 78.5 cm (31")

-€35.04
Out of Stock

DRAG SPECIALTIES 1" Handlebar — Clamping diameter 25.4 mm (1"), width 78.5 cm...

Seamless steel tubing and a wide selection of bends for a custom fit and classic styling.

€99.03 €134.07

-€15.43
Out of Stock

DRAG SPECIALTIES Switch Cap Kit — 13 buttons, Chrome

Update OEM switch caps with a six-piece kit. Radio and cruise control switches not included.

€43.64 €59.07

-€15.43
Out of Stock

DRAG SPECIALTIES Switch Cap Kit — 13 buttons, Chrome

Refresh worn switch caps with an easy DIY upgrade. Quick installation. Six-piece kit; radio and cruise control caps sold separately.

€43.64 €59.07

Handlebar Riser & Top Clamp Kit — 1" clamping diameter, 1/2-13 thread, Chrome

-€91.91
Out of Stock

DRAG SPECIALTIES Handlebar Riser & Top Clamp Kit — 1" clamping diameter, 1/2-13...

Kit includes two risers, one-piece top clamp and all necessary hardware; tapped for 1/2-13 bolts; made in the USA.

€259.75 €351.66

-€5.93
Out of Stock

DRAG SPECIALTIES Switch Cap Kit — 7-button, Chrome

Update the black OEM switch caps without replacing the entire switch. Quick, easy installation. Radio and cruise control switches not included in 6-piece kit.

€16.80 €22.73

1" Touring Handlebar — 1" clamp, 18" rise, 32.5" width, flat black

-€35.04
Out of Stock

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 18" rise, 32.5" width, flat...

Ape-hanger touring handlebar drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€99.03 €134.07

-€19.90
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1") handlebar, Chrome

Die-cast switch housings with radiused edges and OEM-style clamps; switches and clamps sold separately.

€56.25 €76.15

1" T-Bar — 1" diameter, 23-1/2" width, 6" rise, chrome

-€64.21
Out of Stock

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 23-1/2" width, 6" rise, chrome

Steel tubing in multiple finishes, a wide range of bends for a tailored fit, and made in the U.S.A.

€181.44 €245.65

-€19.90
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" handlebar diameter, Black

Chrome brake and clutch controls with die-cast switch housings that accept OEM-style switches and wiring. Switches and clamps sold separately.

€56.25 €76.15

1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, Chrome

-€64.21
Out of Stock

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, Chrome

Steel tubing construction, multiple bends for a custom fit, made in the U.S.A.

€181.44 €245.65

1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, Black gloss

-€49.06
Out of Stock

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, Black gloss

Steel tubing in multiple finishes. Wide variety of bends for a just-right fit. Made in the U.S.A.

€138.66 €187.72

1" T-Bar — 1" diameter, 10" rise, 23-1/2" width, Black gloss

-€49.06
Out of Stock

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 10" rise, 23-1/2" width, Black gloss

Steel-tubed T-bar with multiple bends for a tailored fit. Made in the U.S.A.

€138.66 €187.72

1" T-Bar — 1" diameter, 29-1/2" wide, 9-1/4" rise, Chrome

-€64.21
Out of Stock

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 29-1/2" wide, 9-1/4" rise, Chrome

Steel tubing construction with multiple finish options. Wide selection of bends for a customized fit. Made in the U.S.A. Accepts heated grips; notched for throttle-by-wire.

€181.44 €245.65

-€12.90
Out of Stock

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch, Pivot, 10-pack, Chrome

Replacement fastening kit for pivot connections. Easy to install and provides secure retention.

€36.45 €49.35

1" T-Bar — 1" diameter, 29-1/2" width, 11" rise, Chrome

-€64.21
Out of Stock

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 29-1/2" width, 11" rise, Chrome

Steel tubing in a variety of finishes with multiple bend options for a tailored fit. Made in the U.S.A.

€181.44 €245.65

-€12.86
Out of Stock

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch, Brake, Chrome, 10-pack

Replacement hardware kit with clips and fasteners for control linkages. Easy installation.

€36.34 €49.20

Pivot Pin/Clip Kit — Clutch, Brake, 10-pack, Aluminum, Black Polished

-€13.49
Out of Stock

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch, Brake, 10-pack, Aluminum, Black...

Replacement pin kit for clutch and brake pivot points. Pins and retaining clips included for straightforward installation.

€38.14 €51.63

Throttle Control Adjusting Screw — Chrome

-€0.92
Out of Stock

DRAG SPECIALTIES Throttle Control Adjusting Screw — Chrome

Adjustable screw with spring for fine tension control and straightforward adjustment.

€2.59 €3.51

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2" width, flat black

-€28.04
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2"...

Comfort-oriented buffalo bar design
Slotted/notched for throttle-by-wire
Knurled center and pre-drilled ends
Made in the U.S.A.; not for use on 883C/1200C stock riser/clamp setups

€79.23 €107.27

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34" width, Chrome

-€74.84
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34" width, Chrome

1-1/4" diameter Buffalo Bar handlebar designed for comfort; slotted for Throttle-By-Wire; not for use with stock risers on 883C/1200C models.

€211.52 €286.36

-€4.72
Out of Stock

DRAG SPECIALTIES Handlebar Clamp — 1" clamping diameter, fits '74-'17 models

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers
Fits 1" OD diameter bars

€13.33 €18.05

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34" width, 1" clamp, Black gloss

-€56.78
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34" width, 1"...

Oversized 1-1/4" handlebar with knurled center, pre-drilled for wiring, throttle-by-wire ready, accepts heated grips. Not for use with stock risers on 883C/1200C models.

€160.44 €217.22

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 35" width, 2-1/4" rise, 1" clamp, Black gloss

-€56.78
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 35" width,...

Classic Buffalo-style 1-1/4" handlebar with knurled center, pre-drilled and ready for Throttle-By-Wire. Accepts heated grips; compatible with hydraulic clutch controls. Not for use with stock risers/clamp on 883C/1200C models.

€160.44 €217.22

-€21.14
Out of Stock

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm), Chrome

Billet aluminum clamp; covers clamping area of 1-1/4" bars sized to 1"; fits 3-1/2" on-center risers with offset holes; strengthens risers; made in USA.

€59.74 €80.88

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls