Handlebars & Controls (12)

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, Chrome

Patented internal routing and preloaded E-Z sleeving for simple wiring installations; CNC mandrel bends and machined mounts with high-luster finish. Not for use with stock risers on 883C and 1200C.

€366.17 €463.64

1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center width, Chrome

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center width,...

Patented internal routing and E‑Z pull‑thru sleeving for easy wiring installs; CNC mandrel bends and machined control mounts; high-luster chrome finish. Not for stock risers on 883C/1200C.

€366.17 €463.64

1-1/4" Viking Handlebar — 32 mm (1-1/4") diameter, 25.4 mm (1") center clamp, 19.5 cm (7-3/4") center width, Black gloss

-€103.70

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4") diameter, 25.4 mm...

Patented internal wiring channel for easy harness installation. Preloaded with E‑Z pull‑thru sleeving. CNC mandrel bends and machined control mounts. Not compatible with stock risers or clamp-on assemblies on 883C and 1200C.

€403.28 €506.98

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 1" clamp, Black gloss

-€96.99

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal routing and preload E‑Z sleeving make wiring harness installations fast and clean.

€364.35 €461.34

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 3-1/2" clamp width, gloss black

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal wiring channel for clean installations, preloaded E‑Z sleeving, CNC mandrel bends and machined control mounts. Not compatible with stock risers on 883C and 1200C.

€329.50 €417.21

-€10.57
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4") bore, chrome polished

Complete rear master cylinder assembly, fully assembled for easy installation.

€95.17 €105.74

1-1/4" Viking Handlebar — 1-1/4" dia, 1" center section, 14" rise, 35-1/4" width

-€96.99
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 1" center section, 14"...

Patented internal design for easy wiring installations; preloaded E‑Z pull‑thru sleeving; CNC mandrel bends and machined control mounts. Not for use with stock risers on 883C and 1200C.

€364.35 €461.34

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 16" rise

-€96.99

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal design for easier wiring installations; preloaded with E-Z pull-thru sleeving, knurled center, and machined control mounts for a high-luster finish.

€364.35 €461.34

-€18.49

DRAG SPECIALTIES Rear Brake Master Cylinder — Silver

Complete, fully assembled rear master cylinder ready to install and restore braking performance.

€166.44 €184.93

-€18.49

DRAG SPECIALTIES Rear Brake Master Cylinder — Rear, Black

Complete rear master cylinder assembly, fully assembled for easy installation.

€166.44 €184.93

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome polished$

-€18.20

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome...

Complete rear master cylinder assembly; fully assembled for easy installation. Ideal for maintenance and replacement.

€163.78 €181.98

Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

-€18.20

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

Complete brake assembly, fully assembled for easy installation and quick replacement.

€163.78 €181.98

-€16.36

DRAG SPECIALTIES Rear Brake Master Cylinder — Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€147.21 €163.57

-€16.36

DRAG SPECIALTIES Rear Brake Master Cylinder — Black, B17-655MB

Complete hydraulic assembly, fully assembled for fast installation.

€147.21 €163.57

Cut-Down Front Brake Master Cylinder — 17.5 mm bore, 25.4 mm clamp

-€20.91

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 17.5 mm bore, 25.4 mm...

Chrome die-cast aluminum master cylinder cut down 0.256" for a lower profile; includes chrome mounting clamp and brake lever. Not for use with 1-1/4"/1-1/2" handlebars that are not clearanced.

€188.22 €209.13

Cut-Down Front Brake Master Cylinder — 14.3 mm (9/16") bore, 25.4 mm (1") clamp, Chrome

-€20.40
Out of Stock

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 14.3 mm (9/16") bore,...

Cut-down front brake master cylinder reduced 0.256" for a lower lever profile; includes mounting clamp and brake lever. Not for use with non-clearanced 1-1/4"/1-1/2" handlebars.

€183.63 €204.03

Cut-Down Front Brake Master Cylinder — 15.9 mm (5/8"), 25.4 mm (1"), Chrome

-€20.91

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 15.9 mm (5/8"), 25.4 mm...

Chrome die-cast aluminum master cylinder, cut down for a lower profile; includes chrome clamp and brake lever. Not for use with handlebars without clearance.

€188.22 €209.13

-€5.12

DRAG SPECIALTIES Slotted Wide Blade Lever Set — Hydraulic actuation, Chrome, Pair

Wide blade lever set with CNC-machined slots; includes anti-rattle clip and clutch lever pivot bushings.

€46.11 €51.23

$Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\") clamp, Chrome$

-€16.58

DRAG SPECIALTIES Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\")...

Aluminum handlebar control kit. Uses OEM or equivalent switches (switches not included). Replacement parts sold separately.

€149.24 €165.82

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€29.59

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€266.29 €295.88

$Cylinder — 1200 cc, bore 3.435\", front, Black$

-€24.65
Out of Stock

DRAG SPECIALTIES Cylinder — 1200 cc, bore 3.435\", front, Black

Cast-iron cylinder that meets or exceeds OEM tolerances and withstands greater pressure and heat than stock.

€221.87 €246.52

-€20.30

DRAG SPECIALTIES Cylinder — 3.435" bore, 74 ci, Black

Cast-iron cylinder that meets or exceeds OEM tolerances. Withstands greater pressure and heat than stock components.

€182.73 €203.03

-€21.97

DRAG SPECIALTIES Cylinder — 3.435", 74"

Cast-iron cylinder meets or exceeds OEM tolerances and resists higher pressure and heat for improved durability.

€197.73 €219.70

1" Ape Hanger Handlebar — Rise 10", Width 38", Clamp 1", Chrome

-€17.23

DRAG SPECIALTIES 1" Ape Hanger Handlebar — Rise 10", Width 38", Clamp 1", Chrome

Knurled, slotted Ape Hanger handlebar with internal wiring and OEM heated-grip compatibility. Made in the USA.

€155.05 €172.28

1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, gloss black

-€13.68

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, gloss...

Seamless tubing with a knurled, slotted center; internal wiring ready and accepts OEM heated grips.

€123.09 €136.77

1" Ape Hanger Handlebar — 12" rise, 38" width

-€17.23

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 12" rise, 38" width

Seamless steel ape hanger with knurled center and internal wiring; accepts OEM heated grips.

€155.05 €172.28

1" Ape Hanger Handlebar — 1" clamp, 12" rise, 38" width

-€13.68

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 12" rise, 38" width

Seamless steel ape hanger with knurled center and slotted internal wiring; accepts OEM heated grips. Made in USA.

€123.09 €136.77

1" Ape Hanger Handlebar — 14" rise, 13" center width, 1" clamp diameter

-€17.23
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 14" rise, 13" center width, 1" clamp...

Seamless steel tubing ape hanger with knurled center, slotted for internal wiring and compatible with heated grips.

€155.05 €172.28

1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width

-€13.68

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width

A classic ape hanger shape with knurled, slotted center for internal wiring; accepts OEM heated grips and built from seamless steel tubing.

€123.09 €136.77

1" Ape Hanger Handlebar — Rise 16", Diameter 1", Width 38"

-€17.23

DRAG SPECIALTIES 1" Ape Hanger Handlebar — Rise 16", Diameter 1", Width 38"

Seamless steel tubing with a knurled, slotted center for internal wiring; accepts OEM heated grips; made in the USA.

€155.05 €172.28

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls