Handlebars & Controls (12)

-€6.49

DRAG SPECIALTIES Handlebar Switch — Clutch, front mount, black

Replacement switch for Harley Davidson Can Bus systems.

€18.33 €24.82

1" Handlebar — Clamping diameter 25.4 mm (1"), width 78.5 cm (31")

-€35.04

DRAG SPECIALTIES 1" Handlebar — Clamping diameter 25.4 mm (1"), width 78.5 cm...

Seamless steel tubing and a wide selection of bends for a custom fit and classic styling.

€99.03 €134.07

-€15.43

DRAG SPECIALTIES Switch Cap Kit — 13-button, Chrome

Update worn switch caps quickly with a simple installation. Radio and cruise control switches not included; order separately.

€43.64 €59.07

-€15.43

DRAG SPECIALTIES Switch Cap Kit — Chrome, 13 buttons

Update the black OEM switch caps without replacing the entire switch. Quick, easy installation. Radio and cruise control switches not included and must be ordered separately.

€43.64 €59.07

Handlebar Riser & Top Clamp Kit — 1" clamp, 1/2-13 thread, 1-1/2" pullback, 9-1/2" rise, Chrome

-€91.91

DRAG SPECIALTIES Handlebar Riser & Top Clamp Kit — 1" clamp, 1/2-13 thread,...

Sold as a kit with two risers, one-piece top clamp and necessary hardware. Tapped for 1/2"-13 bolts. Made in the USA.

€259.75 €351.66

-€5.93
Out of Stock

DRAG SPECIALTIES Switch Cap Kit — Chrome, 7-button

Update black OEM switch caps quickly — six-piece kit; radio and cruise control switches sold separately.

€16.80 €22.73

1" Touring Handlebar — 1" clamp, 18" rise, 32-1/2" width, flat black

-€35.04

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 18" rise, 32-1/2" width, flat...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€99.03 €134.07

-€19.90
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1") handlebar, Chrome

Die-cast switch housings with radiused edges and OEM-style clamps; switches and clamps sold separately.

€56.25 €76.15

1" T-Bar — 1" diameter, 6" rise, 23-1/2" width, Chrome

-€64.21

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 6" rise, 23-1/2" width, Chrome

Steel tubing construction with a wide choice of bends for a custom fit. Made in the U.S.A.

€181.44 €245.65

-€19.90
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" (25.4 mm) handlebar, Black

Chrome brake and clutch controls with die-cast aluminum housings and OEM-style clamps; accepts OEM switches and wiring. Switches and clamps sold separately.

€56.25 €76.15

1" T-Bar — 1" diameter, 23-1/2" width, 8" rise, Chrome

-€64.21

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 23-1/2" width, 8" rise, Chrome

Steel tubing construction; wide variety of bends; made in the U.S.A.

€181.44 €245.65

1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, gloss black

-€49.06

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, gloss black

Steel tubing construction, multiple bend options, made in the U.S.A.

€138.66 €187.72

1" T-Bar — 1" diameter, 10" rise, 23.5" width

-€49.06

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 10" rise, 23.5" width

Steel-tubing T-bar with multiple bends for a customizable fit; made in the U.S.A.

€138.66 €187.72

Dual-Cable Throttle Assembly Kit — 39" cable, 1" handlebar, Black/Chrome

-€57.13

S&S CYCLE Dual-Cable Throttle Assembly Kit — 39" cable, 1" handlebar,...

Complete dual-cable throttle assembly kit with matching grips, sleeve, OEM-style throttle and idle cables, hardware, and 90° elbows.

€222.18 €279.31

-€12.58

DRAG SPECIALTIES Pivot Pin/Clip Kit — Black, Polished, 10-pack

Replacement kit for restoring secure pivot connections and reducing play.

€35.57 €48.15

1" T-Bar — 1" diameter, 29-1/2" wide, 9-1/4" rise, Chrome

-€64.21
Out of Stock

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 29-1/2" wide, 9-1/4" rise, Chrome

Steel tubing construction with multiple finish options. Wide selection of bends for a customized fit. Made in the U.S.A. Accepts heated grips; notched for throttle-by-wire.

€181.44 €245.65

-€12.90

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-pack, Chrome

Replacement kit for worn hardware; easy to install and ideal for routine maintenance.

€36.45 €49.35

1" T-Bar — 1" diameter, 11" rise, 29-1/2" width, Chrome

-€64.21

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 11" rise, 29-1/2" width, Chrome

Steel tubing in multiple finishes; wide variety of bends for a custom fit; made in the U.S.A.

€181.44 €245.65

-€12.86

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch and Brake, Chrome, 10 Pack

Replacement pin kit for pivot assemblies; easy installation and reliable retention.

€36.34 €49.20

Throttle Control Adjusting Screw — Chrome

-€0.92
Out of Stock

DRAG SPECIALTIES Throttle Control Adjusting Screw — Chrome

Adjustable screw with spring for precise throttle control.

€2.59 €3.51

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2" width, Black flat

-€28.04

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2"...

Comfort-focused Buffalo Bar handlebar with TBW-ready design and knurled center for secure grip.

€79.23 €107.27

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), Chrome, Not for stock risers on 883C/1200C

-€74.84

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), Chrome, Not for...

1-1/4" diameter Buffalo bar with knurled center, pre-drilled for heated grips, and notched for throttle-by-wire. Not for stock risers on 883C/1200C.

€211.52 €286.36

-€1.31
New

DRAG SPECIALTIES Throttle Assist — 22 mm (7/8"), 25.4 mm (1"), Black

Improves throttle comfort and hand positioning. Sold each.

€3.69 €5.00

Handlebar Clamp — 25.4 mm (1"), fits '74–'17 3-1/2" on-center risers

-€4.72

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1"), fits '74–'17 3-1/2" on-center...

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers and accepts 1" OD bars.

€13.33 €18.05

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 34" width, 5-1/2" rise, 1" clamp, Black gloss

-€56.78

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 34" width, 5-1/2"...

1-1/4" Buffalo Bar handlebar with knurled center, throttle-by-wire ready, pre-drilled and compatible with hydraulic clutch controls. Made in the U.S.A.

€160.44 €217.22

-€1,212.13

S&S CYCLE Top End Kit — 74 cu in, 3-7/16" bore, 8.0:1 compression

Complete S&S top-end kit with heads, pre-fit forged pistons, and all necessary hardware for quick installation.

€3,425.64 €4,637.77

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 89 cm (35"), Black

-€56.78

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 89 cm (35"), Black

Buffalo-style handlebar offering comfortable ergonomics, throttle-by-wire ready, pre-drilled, and compatible with hydraulic clutch controls.

€160.44 €217.22

$Buffalo Handlebar Clamp — 1\" (25.4 mm) clamping diameter, 3-1/2\" on-center riser fit, Chrome$

-€21.14

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1\" (25.4 mm) clamping diameter,...

Billet aluminum clamp that strengthens risers and fits 1-1/4\" bars sized down to 1\"; improves control with aftermarket or stock handlebars.

€59.74 €80.88

Top End Kit — 3.500" bore, 4.25" stroke, 8.0:1 compression, 80 cu in

-€723.44

S&S CYCLE Top End Kit — 3.500" bore, 4.25" stroke, 8.0:1 compression, 80...

Complete top-end assembly with heads, cylinders, pistons, and gaskets.
Pistons pre-fit to cylinders for minimal downtime.
Includes all hardware, clamps, and seals; made in the USA.

€2,813.38 €3,536.82

-€27.71

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm), Chrome

Billet-style handlebar clamp that covers the full clamping area and improves riser strength and control.

€78.28 €105.99

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls