Handlebars & Controls (11)

-€1.81

DRAG SPECIALTIES Chrome Plug for Handlebar Clamps — 12 Pack

Fits socket-head screws with 1/4" hex. Sold each; dealer packs of 12.

€5.10 €6.91

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping, 9-1/2" center width, Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping,...

Classic buffalo-style handlebar engineered for comfort. Knurled center to prevent movement, pre-drilled, accepts heated grips, compatible with hydraulic clutch controls.

€186.60 €241.49

Buffalo Handlebar Clamp — 1" clamping diameter, chrome

-€24.93

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, chrome

Billet-style handlebar clamp that strengthens risers and supports 1" handlebars; for 3-1/2" on-center risers with offset holes.

€53.42 €78.35

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 33" width, chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 33" width, chrome

Steel Buffalo bar with knurled center, pre-drilled holes, and Throttle-By-Wire ready. Not compatible with stock risers on 883C/1200C.

€186.60 €241.49

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 30-1/2" width, Chrome

-€73.02

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 30-1/2" width,...

1-1/4" diameter handlebar with 1" clamping area; pre-drilled and notched for Throttle-By-Wire. Compatible with heated grips and hydraulic clutch controls. Not for use with stock risers on 883C/1200C.

€206.36 €279.38

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 30" width, Chrome

-€79.05

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 30" width, Chrome

A versatile Buffalo T-Bar with pre-drilled mounting, knurled center, heated-grip compatibility, and optional gauge mounts. Not for use with stock risers/clamp on 883C/1200C.

€223.40 €302.45

$Replacement Cylinder — 3.750\", 88/96 cu in$

-€76.40

DRAG SPECIALTIES Replacement Cylinder — 3.750\", 88/96 cu in

OEM black textured powder-coat with highlighted fins; excellent for stock replacement.

€215.92 €292.32

1-1/2" "Big" Buffalo Beach Bar Handlebar — 1-1/2" clamp, 34-1/2" width, 4-1/2" rise, Black gloss

-€71.48

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Beach Bar Handlebar — 1-1/2" clamp,...

Aggressive Big Buffalo beach bar with custom bends for comfort. Designed for 1996-and-newer style controls. Made in the U.S.A.

€202.05 €273.53

1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping, 32-1/2" width, Black

-€37.99

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping,...

Aggressive drag-style handlebar with knurled center and pre-drilled mounting; accepts heated grips and requires special risers.

€129.16 €167.15

1-1/2" "Big" Buffalo Bar — 1.5" diameter, 10" rise, 30.5" width, Black Gloss

-€59.62

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 1.5" diameter, 10" rise, 30.5"...

Bold T-bar handlebar with a Big Buffalo profile, custom bends, pre-drilled fitment, and compatibility with most '99+ Harley-Davidson models.

€202.70 €262.32

1-1/2" "Big" Buffalo Bar — 1-1/2" diameter, 14" rise, 30-1/2" width, Chrome

-€97.42

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 1-1/2" diameter, 14" rise, 30-1/2"...

Bold Big Buffalo handlebars with custom bends for comfort; compatible with 96+ controls and most '99+ Harley-Davidson models; optional gauge mounts sold separately.

€275.33 €372.75

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 32-1/4" width, chrome

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete Viking handlebar kit with matching braided cables and brake lines. Preloaded E‑Z pull‑thru sleeving for fast wiring. Includes all necessary cables, hardware and extensions. Assembled in the U.S.A.

€651.84 €825.35

-€21.19

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€59.86 €81.05

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 12" center width, 1" clamping diameter, Chrome

-€181.79

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter,...

Complete kits with matching braided cables and brake lines; patented internal design for easy wiring; preloaded E‑Z pull-thru sleeving; includes all required hardware. Assembled in the U.S.A.

€553.23 €735.02

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished$

-€28.98

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished

Complete, fully assembled rear master cylinder for quick installation.

€81.91 €110.89

1-1/4" Viking Handlebar Installation Kit — 1-1/4" dia, 1" clamp, Chrome

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" dia, 1"...

Complete installation kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and all necessary hardware for a clean, fast install.

€751.41 €951.42

-€20.36

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€57.55 €77.91

1-1/4" Viking Handlebar Installation Kit — 1-1/4" (32 mm), 12" (30.5 cm), Chrome

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" (32 mm), 12"...

Complete Viking handlebar kit with matched braided cables and brake lines, preloaded pull‑thru sleeving, burr‑free internal routing, and all necessary hardware. Assembled in the U.S.A.

€829.89 €1,050.79

Rear Brake Master Cylinder — 19.1 mm (3/4"), rear, chrome polished

-€22.42

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), rear, chrome...

Complete rear master cylinder assembly; fully assembled for easy installation.

€63.38 €85.80

-€6.09

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — Black

Meets or exceeds OEM specifications
Fits Sportster H-D models
Includes metal piston

€17.23 €23.32

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, 7-3/4" center, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, 7-3/4"...

Patented internal routing and preloaded E‑Z pull-thru sleeving for fast, clean wiring installs; CNC mandrel bends and machined control mounts. Not for use with stock risers on 883C and 1200C.

€331.15 €419.29

-€2.73

DRAG SPECIALTIES Master Cylinder Reservoir Update Kit — Front, Black

Includes decal, sight glass, screws and reservoir gasket for a straightforward update.

€7.70 €10.43

-€5.59

DRAG SPECIALTIES Front Master Cylinder Cover — Chrome, Front

Front master cylinder cover that provides protection and a finished look; includes rubber cover gasket for a secure seal.

€15.78 €21.37

$1-1/4\" Viking Handlebar — 1-1/4\" diameter, 12\" center, 1\" clamp, 10\" rise, Chrome$

-€93.30

MAGNUM SHIELDING 1-1/4\" Viking Handlebar — 1-1/4\" diameter, 12\" center, 1\"...

Patented Viking internal wiring design for clean installations; preloaded with E‑Z pull‑thru sleeving. CNC mandrel bends and high‑luster finish.

€362.88 €456.18

-€10.36

DRAG SPECIALTIES Rear Brake Master Cylinder Cover Kit — Chrome

Replacement assembly for the motorcycle braking reservoir lid. Includes gasket and mounting screws for easy installation.

€29.27 €39.63

-€5.53

DRAG SPECIALTIES Rear Brake Master Cylinder Cover Kit — Chrome

Precision replacement cover with gasket and mounting screws included. Durable plated finish; direct-fit installation.

€15.61 €21.14

Rear Brake Master Cylinder Rebuild Kit — Rear mounting, fits Sportster H-D models, Black

-€5.53

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — Rear mounting, fits...

Complete rebuild kit for brake master cylinders, meets or exceeds OEM specs; fits Sportster H-D models; includes metal piston.

€15.64 €21.17

Rear Brake Master Cylinder Rebuild Kit — Black or Silver, fits Sportster H-D models

-€5.53

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — Black or Silver, fits...

Rebuild kit for rear master cylinder. Meets or exceeds OEM specs and includes a metal piston. Fits Sportster H-D models.

€15.64 €21.17

1-1/4" Viking Handlebar — 1-1/4" dia, 12" center, 1" clamp, Black gloss

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 12" center, 1" clamp,...

Patented internal routing for easy wiring installs; preloaded E‑Z pull‑thru sleeving; burr‑free internal radius; CNC mandrel bends and machined control mounts; not compatible with stock risers on certain models.

€376.30 €473.06

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company