Handlebars & Controls (11)

1" Handlebar — 29.5" W, 17" rise, 1" clamp, Chrome

-€17.23

DRAG SPECIALTIES 1" Handlebar — 29.5" W, 17" rise, 1" clamp, Chrome

Seamless steel tubing for strength and a smooth finish.

Wide variety of bends for a just-right fit and feel.

Made in the U.S.A.

€155.05 €172.28

Can Bus Handlebar Control Module — 48" harness, left mount, chrome

-€13.55

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, left mount,...

IP66-rated handlebar control module with included switch and wire harness. Not for use with Softail models that feature cruise control.

€121.97 €135.52

Can Bus Handlebar Control Module — 48" harness, left mount, 3-button

-€12.09
Out of Stock

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, left mount,...

Handlebar Can Bus control module with IP66-rated housing, including switch, long harness, and turn signal reserve. Not for use on Softail models with cruise control.

€108.79 €120.88

1" Handlebar — 31" width, 12" height, Flat Black

-€13.41

DRAG SPECIALTIES 1" Handlebar — 31" width, 12" height, Flat Black

Seamless steel-tubing handlebar with multiple bends for a tailored fit.

€120.66 €134.07

-€5.91

DRAG SPECIALTIES Switch Cap Kit — 13-button, Chrome

Update worn switch caps quickly with a simple installation. Radio and cruise control switches not included; order separately.

€53.16 €59.07

-€5.91

DRAG SPECIALTIES Switch Cap Kit — Chrome, 13 buttons

Update the black OEM switch caps without replacing the entire switch. Quick, easy installation. Radio and cruise control switches not included and must be ordered separately.

€53.16 €59.07

Handlebar Riser & Top Clamp Kit — 1" clamp, 1/2-13 thread, 1-1/2" pullback, 9-1/2" rise, Chrome

-€35.17

DRAG SPECIALTIES Handlebar Riser & Top Clamp Kit — 1" clamp, 1/2-13 thread,...

Sold as a kit with two risers, one-piece top clamp and necessary hardware. Tapped for 1/2"-13 bolts. Made in the USA.

€316.49 €351.66

Out of Stock

DRAG SPECIALTIES Switch Cap Kit — Chrome, 7-button

Update black OEM switch caps quickly — six-piece kit; radio and cruise control switches sold separately.

€22.73

1" Touring Handlebar — 1" clamp, 18" rise, 32-1/2" width, flat black

-€13.41

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 18" rise, 32-1/2" width, flat...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€120.66 €134.07

-€7.61
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1") , Chrome

Handlebar switch housing kit with die-cast housings, OEM-style clamp compatibility; switches and clamps sold separately.

€68.54 €76.15

1" T-Bar — 1" diameter, 6" rise, 23-1/2" width, Chrome

-€24.56

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 6" rise, 23-1/2" width, Chrome

Steel tubing construction with a wide choice of bends for a custom fit. Made in the U.S.A.

€221.09 €245.65

-€7.61
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" (25.4 mm) handlebar, Black

Chrome brake and clutch controls with die-cast aluminum housings and OEM-style clamps; accepts OEM switches and wiring. Switches and clamps sold separately.

€68.54 €76.15

1" T-Bar — 1" diameter, 23-1/2" width, 8" rise, Chrome

-€24.56

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 23-1/2" width, 8" rise, Chrome

Steel tubing construction; wide variety of bends; made in the U.S.A.

€221.09 €245.65

1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, gloss black

-€18.77

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 8" rise, 23-1/2" width, gloss black

Steel tubing construction, multiple bend options, made in the U.S.A.

€168.95 €187.72

1" T-Bar — 1" diameter, 10" rise, 23.5" width

-€18.77

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 10" rise, 23.5" width

Steel-tubing T-bar with multiple bends for a customizable fit; made in the U.S.A.

€168.95 €187.72

1" T-Bar — 9-1/4" rise, 29-1/2" width, Chrome

-€24.56
Out of Stock

DRAG SPECIALTIES 1" T-Bar — 9-1/4" rise, 29-1/2" width, Chrome

Steel T-bar with multiple bends for a tailored fit. Made in the U.S.A.

€221.09 €245.65

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-pack, Chrome

Replacement kit for worn hardware; easy to install and ideal for routine maintenance.

€49.35

1" T-Bar — 1" diameter, 11" rise, 29-1/2" width, Chrome

-€24.56

DRAG SPECIALTIES 1" T-Bar — 1" diameter, 11" rise, 29-1/2" width, Chrome

Steel tubing in multiple finishes; wide variety of bends for a custom fit; made in the U.S.A.

€221.09 €245.65

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch and Brake, Chrome, 10 Pack

Replacement pin kit for pivot assemblies; easy installation and reliable retention.

€49.20

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2" width, Black flat

-€10.73

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2"...

Comfort-focused Buffalo Bar handlebar with TBW-ready design and knurled center for secure grip.

€96.54 €107.27

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), Chrome, Not for stock risers on 883C/1200C

-€28.64

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), Chrome, Not for...

1-1/4" diameter Buffalo bar with knurled center, pre-drilled for heated grips, and notched for throttle-by-wire. Not for stock risers on 883C/1200C.

€257.72 €286.36

-€1.31

DRAG SPECIALTIES Throttle Assist — 22 mm (7/8"), 25.4 mm (1"), Black

Improves throttle comfort and hand positioning. Sold each.

€3.69 €5.00

Handlebar Clamp — 25.4 mm (1"), fits '74–'17 3-1/2" on-center risers

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1"), fits '74–'17 3-1/2" on-center...

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers and accepts 1" OD bars.

€18.05

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 34" width, 5-1/2" rise, 1" clamp, Black gloss

-€21.72

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 34" width, 5-1/2"...

1-1/4" Buffalo Bar handlebar with knurled center, throttle-by-wire ready, pre-drilled and compatible with hydraulic clutch controls. Made in the U.S.A.

€195.50 €217.22

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 89 cm (35"), Black

-€21.72

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 89 cm (35"), Black

Buffalo-style handlebar offering comfortable ergonomics, throttle-by-wire ready, pre-drilled, and compatible with hydraulic clutch controls.

€195.50 €217.22

$Buffalo Handlebar Clamp — 1\" (25.4 mm) clamping diameter, 3-1/2\" on-center riser fit, Chrome$

-€8.09

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1\" (25.4 mm) clamping diameter,...

Billet aluminum clamp that strengthens risers and fits 1-1/4\" bars sized down to 1\"; improves control with aftermarket or stock handlebars.

€72.79 €80.88

-€10.60

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm), Chrome

Billet-style handlebar clamp that covers the full clamping area and improves riser strength and control.

€95.39 €105.99

-€12.03

EASTERN MOTORCYCLE PARTS Rocker Box Stud Kit — 8 Pack

Includes eight long studs, two short studs and one top motor mount stud. One kit required per head.

€34.00 €46.03

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 32-3/4" width, 4-1/4" rise, 1" clamp, Chrome

-€28.64
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 32-3/4" width,...

Ultimate 1-1/4" diameter handlebar for maximum comfort.
1" diameter clamping area; slotted and notched for throttle-by-wire.
3-1/2" on-center knurling; pre-drilled to accept heated grips.
Made in the U.S.A.; not for use with stock risers and clamp/gauge mount on 883C/1200C models.

€257.72 €286.36

-€5.21

EASTERN MOTORCYCLE PARTS Top Motor Mount Studs — 4 pack

Durable mounting hardware delivers secure clamping, corrosion resistance, and precise fit. Made in the U.S.A.

€14.74 €19.95

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls