Handlebars & Controls (11)

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp, 76 cm (30") width

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4...

Classic 1-1/4" Buffalo Bar with drag-style sweep, slotted for Throttle-By-Wire and compatible with hydraulic clutch controls.

€73.39 €94.97

Throttle Control Adjusting Screw — Chrome

-€0.92

DRAG SPECIALTIES Throttle Control Adjusting Screw — Chrome

Adjustable screw with spring for precise throttle control.

€2.59 €3.51

-€1.78

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — Master cylinder, rear

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€5.05 €6.83

$1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm (1\"), Black$

-€27.35

DRAG SPECIALTIES 1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm...

Classic Buffalo sweep handlebar engineered for comfort, secure center knurling, and Throttle-By-Wire compatibility.

€77.30 €104.65

-€2.09

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — rubber, 77360

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.91 €8.00

Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17 models

-€5.19

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17...

Die-cast handlebar clamp for compatible models with on-center risers and offset mounting holes.

€14.66 €19.85

Handlebar Clamp — 25.4 mm (1"), fits '74–'17 3-1/2" on-center risers

-€4.72

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1"), fits '74–'17 3-1/2" on-center...

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers and accepts 1" OD bars.

€13.33 €18.05

-€1.81

DRAG SPECIALTIES Chrome Plug for Handlebar Clamps — 12 Pack

Fits any socket-head screw with 1/4\" hex. Sold individually to consumers; dealers sold in packs of 12.

€5.10 €6.91

1-1/4" Buffalo Bar Handlebar — 32 mm diameter, 25.4 mm clamp, 89 cm width, Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm diameter, 25.4 mm clamp,...

Oversized Buffalo bar designed for comfort, with knurled center, pre-drilled holes for heated grips, and Throttle-By-Wire readiness. Made in the U.S.A.; not compatible with stock risers on 883C/1200C models.

€186.60 €241.49

Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2" on-center risers

-€24.93

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2"...

Billet-aluminum clamp that covers the full clamping area, fits 1" bars sized from 1-1/4", for use with 3-1/2" on-center risers. Made in the USA.

€53.42 €78.35

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"), 25.4 mm (1"), Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"),...

Classic buffalo-bend handlebar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility. Made in the U.S.A.; compatible with hydraulic clutch controls.

€186.60 €241.49

1-1/4" Buffalo Bar Handlebar — 25.4 mm (1") clamp, 77.5 cm (30-1/2") width, Chrome

-€73.02

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 25.4 mm (1") clamp, 77.5 cm...

Comfort-focused 1-1/4" handlebar with TBW-ready slots; made in the U.S.A. Not for use on 883C/1200C stock riser setups.

€206.36 €279.38

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.5" , Black

-€85.70

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Ductile cast-iron sleeved cylinders pressed into aluminum castings. Sleeve ribs lock to the casting; finished slightly undersized for final honing. Ideal for stock replacement.

€242.22 €327.92

1-1/4" Buffalo T-Bar — 30" width, 10" height

-€79.05

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 30" width, 10" height

Classic 1-1/4" Buffalo T-Bar handlebar. Optional gauge mounts sold separately. Not for use with stock risers on 883C/1200C models.

€223.40 €302.45

1-1/2" "Big" Buffalo Beach Bar Handlebar — 38 mm (1-1/2") clamp, 87.5 cm (34-1/2") width, 11.5 cm (4-1/2") rise

-€71.48

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Beach Bar Handlebar — 38 mm (1-1/2")...

Big, fat Buffalo beach bar with custom bends for comfort; fits ’96 and newer controls; made in the U.S.A.

€202.05 €273.53

1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping, 32-1/2" width, Black

-€37.99

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping,...

Aggressive drag-style handlebar with knurled center and pre-drilled mounting; accepts heated grips and requires special risers.

€129.16 €167.15

1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 10" rise, 30-1/2" width, Black gloss

-€59.62

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 10" rise, 30-1/2"...

Bold T-bar handlebar with custom bends for improved comfort. Pre-drilled; optional gauge mounts available separately. Compatible with most '99+ Harley-Davidson models. Accepts heated grips and hydraulic clutch. Made in the U.S.A.

€202.70 €262.32

1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 35.5 cm (14") rise, Chrome

-€97.42

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 35.5 cm (14") rise,...

Handlebars with custom bends for comfort; accepts heated grips and hydraulic clutch. Optional gauge mounts available separately.

€275.33 €372.75

-€21.19

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€59.86 €81.05

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished$

-€28.98

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished

Complete, fully assembled rear master cylinder for quick installation.

€81.91 €110.89

-€20.36

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€57.55 €77.91

Rear Brake Master Cylinder — 19.1 mm (3/4"), rear, chrome polished

-€22.42

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), rear, chrome...

Complete rear master cylinder assembly; fully assembled for easy installation.

€63.38 €85.80

-€6.09

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — Black

Meets or exceeds OEM specifications
Fits Sportster H-D models
Includes metal piston

€17.23 €23.32

-€2.73

DRAG SPECIALTIES Master Cylinder Reservoir Update Kit — Front, Black

Includes decal, sight glass, screws and reservoir gasket for a straightforward update.

€7.70 €10.43

-€5.59

DRAG SPECIALTIES Front Master Cylinder Cover — Chrome, Front

Front master cylinder cover that provides protection and a finished look; includes rubber cover gasket for a secure seal.

€15.78 €21.37

-€6.68

DRAG SPECIALTIES Replacement Gaskets — Master cylinder, Rear, 5-pack, Black

Durable replacement gaskets for brake cover kits that prevent leaks and ensure a proper seal.

€18.90 €25.58

-€10.36

DRAG SPECIALTIES Rear Brake Master Cylinder Cover Kit — Chrome

Replacement assembly for the motorcycle braking reservoir lid. Includes gasket and mounting screws for easy installation.

€29.27 €39.63

-€5.53

DRAG SPECIALTIES Rear Brake Master Cylinder Cover Kit — Chrome

Precision replacement cover with gasket and mounting screws included. Durable plated finish; direct-fit installation.

€15.61 €21.14

Rear Brake Master Cylinder Rebuild Kit — Rear mounting, fits Sportster H-D models, Black

-€5.53

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — Rear mounting, fits...

Complete rebuild kit for brake master cylinders, meets or exceeds OEM specs; fits Sportster H-D models; includes metal piston.

€15.64 €21.17

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company