Handlebars & Controls (11)

Throttle Assembly — 1" handlebar, single cable

-€6.38

DRAG SPECIALTIES Throttle Assembly — 1" handlebar, single cable

Complete dual-cable throttle assembly with matching left-hand grip; accepts thread-in cables. Sold as a kit.

€18.02 €24.40

1-1/4" Buffalo Bar Handlebar — 30" width, Black gloss

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 30" width, Black gloss

Classic 1-1/4" Buffalo Bar handlebar with drag bend and knurled center. Slotted for throttle-by-wire; compatible with hydraulic clutch. Made in the U.S.A.

€73.39 €94.97

Throttle Assembly — 1" handlebar, dual cable, Black, Chrome

-€5.41

DRAG SPECIALTIES Throttle Assembly — 1" handlebar, dual cable, Black, Chrome

Complete dual-cable throttle assembly with matching left-hand grip. Accepts thread-in cables.

€15.30 €20.71

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 30", 1" clamp, Flat Black

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 30", 1" clamp, Flat...

Oversized 1-1/4" drag-style Buffalo handlebar with slotted throttle-by-wire options and knurled center. Compatible with hydraulic clutch; not for use on 883C/1200C stock risers.

€73.39 €94.97

-€1.78

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — Master cylinder, rear

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€5.05 €6.83

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2" width, Black gloss

-€27.35

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2"...

Ultimate 1-1/4" diameter Buffalo-style handlebar, slotted for Throttle-By-Wire, pre-drilled and knurled for secure fit.

€77.30 €104.65

-€2.09

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — rubber, 77360

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.91 €8.00

-€5.19

DRAG SPECIALTIES Handlebar Clamp — 1" (25.4 mm), Chrome

Die-cast handlebar clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes.

€14.66 €19.85

-€1.81

DRAG SPECIALTIES Chrome Plug for Handlebar Clamps — 12 Pack

Fits socket-head screws with 1/4" hex. Sold each; dealer packs of 12.

€5.10 €6.91

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping, 9-1/2" center width, Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping,...

Classic buffalo-style handlebar engineered for comfort. Knurled center to prevent movement, pre-drilled, accepts heated grips, compatible with hydraulic clutch controls.

€186.60 €241.49

Buffalo Handlebar Clamp — 1" clamping diameter, chrome

-€24.93

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, chrome

Billet-style handlebar clamp that strengthens risers and supports 1" handlebars; for 3-1/2" on-center risers with offset holes.

€53.42 €78.35

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 33" width, chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 33" width, chrome

Steel Buffalo bar with knurled center, pre-drilled holes, and Throttle-By-Wire ready. Not compatible with stock risers on 883C/1200C.

€186.60 €241.49

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 30-1/2" width, Chrome

-€73.02

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 30-1/2" width,...

1-1/4" diameter handlebar with 1" clamping area; pre-drilled and notched for Throttle-By-Wire. Compatible with heated grips and hydraulic clutch controls. Not for use with stock risers on 883C/1200C.

€206.36 €279.38

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 30" width, Chrome

-€79.05

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 30" width, Chrome

A versatile Buffalo T-Bar with pre-drilled mounting, knurled center, heated-grip compatibility, and optional gauge mounts. Not for use with stock risers/clamp on 883C/1200C.

€223.40 €302.45

1-1/2" "Big" Buffalo Beach Bar Handlebar — 1-1/2" clamp, 34-1/2" width, 4-1/2" rise, Black gloss

-€71.48

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Beach Bar Handlebar — 1-1/2" clamp,...

Aggressive Big Buffalo beach bar with custom bends for comfort. Designed for 1996-and-newer style controls. Made in the U.S.A.

€202.05 €273.53

1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping, 32-1/2" width, Black

-€37.99

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping,...

Aggressive drag-style handlebar with knurled center and pre-drilled mounting; accepts heated grips and requires special risers.

€129.16 €167.15

1-1/2" "Big" Buffalo Bar — 1.5" diameter, 10" rise, 30.5" width, Black Gloss

-€59.62

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 1.5" diameter, 10" rise, 30.5"...

Bold T-bar handlebar with a Big Buffalo profile, custom bends, pre-drilled fitment, and compatibility with most '99+ Harley-Davidson models.

€202.70 €262.32

1-1/2" "Big" Buffalo Bar — 1-1/2" diameter, 14" rise, 30-1/2" width, Chrome

-€97.42

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 1-1/2" diameter, 14" rise, 30-1/2"...

Bold Big Buffalo handlebars with custom bends for comfort; compatible with 96+ controls and most '99+ Harley-Davidson models; optional gauge mounts sold separately.

€275.33 €372.75

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 32-1/4" width, chrome

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete Viking handlebar kit with matching braided cables and brake lines. Preloaded E‑Z pull‑thru sleeving for fast wiring. Includes all necessary cables, hardware and extensions. Assembled in the U.S.A.

€651.84 €825.35

-€21.19

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€59.86 €81.05

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 12" center width, 1" clamping diameter, Chrome

-€181.79

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter,...

Complete kits with matching braided cables and brake lines; patented internal design for easy wiring; preloaded E‑Z pull-thru sleeving; includes all required hardware. Assembled in the U.S.A.

€553.23 €735.02

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished$

-€28.98

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished

Complete, fully assembled rear master cylinder for quick installation.

€81.91 €110.89

1-1/4" Viking Handlebar Installation Kit — 1-1/4" dia, 1" clamp, Chrome

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" dia, 1"...

Complete installation kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and all necessary hardware for a clean, fast install.

€751.41 €951.42

-€20.36

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€57.55 €77.91

1-1/4" Viking Handlebar Installation Kit — 1-1/4" (32 mm), 12" (30.5 cm), Chrome

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" (32 mm), 12"...

Complete Viking handlebar kit with matched braided cables and brake lines, preloaded pull‑thru sleeving, burr‑free internal routing, and all necessary hardware. Assembled in the U.S.A.

€829.89 €1,050.79

Rear Brake Master Cylinder — 19.1 mm (3/4"), rear, chrome polished

-€22.42

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), rear, chrome...

Complete rear master cylinder assembly; fully assembled for easy installation.

€63.38 €85.80

-€6.09

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — Black

Meets or exceeds OEM specifications
Fits Sportster H-D models
Includes metal piston

€17.23 €23.32

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, 7-3/4" center, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, 7-3/4"...

Patented internal routing and preloaded E‑Z pull-thru sleeving for fast, clean wiring installs; CNC mandrel bends and machined control mounts. Not for use with stock risers on 883C and 1200C.

€331.15 €419.29

-€2.73

DRAG SPECIALTIES Master Cylinder Reservoir Update Kit — Front, Black

Includes decal, sight glass, screws and reservoir gasket for a straightforward update.

€7.70 €10.43

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company