Handlebars & Controls (10)

Xtreme SPC+ Case — Samsung S25 Ultra, Black, Flat

-€17.56

SP CONNECT Xtreme SPC+ Case — Samsung S25 Ultra, Black, Flat

Two-piece protective phone case with quick magnetic attachment, wireless charging support, MIL-STD 810 drop protection, IP68 waterproofing, and full touchscreen functionality.

€49.61 €67.17

All Weather Device Weather Cover — Samsung S25 Ultra, Clear

-€4.38

SP CONNECT All Weather Device Weather Cover — Samsung S25 Ultra, Clear

Protection against moisture and dirt, added shock resistance, and maintained touchscreen operability.

€12.40 €16.78

-€4.38

SP CONNECT Screen Protector — Samsung S25 Ultra compatible, Clear

0.5 mm thin tempered glass screen protector; scratch-, heat- and stain-resistant; compatible with SP Connect phone cases.

€12.40 €16.78

-€8.77
New

SP CONNECT SPC+ Phone Case — iPhone® 17, Black

Slim protective phone case with fast magnetic attachment, MagSafe® compatibility, and wireless charging support.

€24.81 €33.58

SPC+ Phone Case — iPhone® 17 Pro, Black, Flat

-€8.77
New

SP CONNECT SPC+ Phone Case — iPhone® 17 Pro, Black, Flat

Fast magnetic attachment and quick, secure mounting. MagSafe® compatible and supports wireless charging.

€24.81 €33.58

-€8.77
New

SP CONNECT SPC+ Phone Case — iPhone® 17 Air, Black

Fast magnetic attachment for easy mounting.
Quick, secure hold for everyday use.
MagSafe® compatible and supports wireless charging.

€24.81 €33.58

SPC+ Phone Case — iPhone® 17 Pro Max, Black

-€8.77
New

SP CONNECT SPC+ Phone Case — iPhone® 17 Pro Max, Black

Fast magnetic attachment, MagSafe® compatible, and supports wireless charging.

€24.81 €33.58

-€8.60

SW-MOTECH Brake Cylinder Guard — Rear, Black

Folded, laser-cut protector that prevents boot contact with the foot brake cylinder; includes mounting hardware and instructions.

€33.42 €42.02

-€7.74

SW-MOTECH Brake Reservoir Guard — Black, Rear

Compact guard protects the original brake reservoir from rock chips and prevents unwanted cover removal; includes mounting hardware and instructions.

€30.08 €37.82

-€8.60

SW-MOTECH Heel Guard — Left, black anodized

Protects boot from heat and moving parts; bike-specific fit; easy mounting; instructions and mounting material included.

€33.42 €42.02

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

-€31.27

KIBBLEWHITE Rocker Arm Shaft Stud & Nut Kit — Black oxide

High‑strength studs and rolled‑thread nuts deliver durable, corrosion‑resistant fastening for rocker arm shafts. Made in the U.S.A.

€88.45 €119.72

-€46.11

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground studs that reduce notch sensitivity and improve fatigue resistance. Hydraulically rolled threads and 180,000 psi aircraft-quality material. Made in the U.S.A.

€130.44 €176.55

-€2.19

KIBBLEWHITE Cylinder Dowels — Black oxide, 4-pack

OEM replacement dowels for HD® Evolution engines that ensure precise cylinder alignment and reliable fitment.

€6.23 €8.42

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

Gooden Tight™ Springer Handlebar Riser Stud Bushing Kit — Chrome

-€22.87
Out of Stock

ALLOY ART Gooden Tight™ Springer Handlebar Riser Stud Bushing Kit — Chrome

Includes poly bushings, riser studs, mounting bolts and billet inserts. Made in the USA. Easy drop-in installation.

€64.64 €87.51

-€3.43
Out of Stock

SW-MOTECH 1" Ball — Black

Mounts to an existing ram arm. For GPS, camera and GoPro mounting.

€13.38 €16.81

Diameter Adapters Mirror Mount (Pro) — 10/12/14 mm, Black

-€1.37
Out of Stock

SP CONNECT Diameter Adapters Mirror Mount (Pro) — 10/12/14 mm, Black

Three-piece spacer set for Mirror Mount / Mirror Mount Pro. Inserts in 10 mm, 12 mm and 14 mm ensure a firm, secure fit.

€3.85 €5.22

Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-13, 3" length, Chrome

-€20.44
Out of Stock

ALLOY ART Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-13, 3"...

Clean-install riser bushing kit featuring Gooden Tight™ bushings, flathead bolts and billet washers. Made in the USA.

€57.75 €78.19

Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-20, 3" length, Chrome

-€20.44
Out of Stock

ALLOY ART Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-20, 3"...

Complete riser bushing kit with flathead mounting bolts and cup washers for a concealed, factory-style finish.

€57.75 €78.19

-€18.83
Out of Stock

ODI Ruffian Lock-On Street Grips — 25.4 mm (1"), Black

Moto-inspired Ruffian grips with a full-knurl diamond pattern, thin profile for control, medium-compound comfort, in-molded throttle tube and billet Lock-On clamp.

€53.23 €72.06

-€18.83
Out of Stock

ODI Ruffian Lock-On Street Grips — 25.4 mm (1 in), Black, Flat

Moto-inspired Ruffian grip with a full-knurl diamond pattern for superior control, traction and comfort.

€53.23 €72.06

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls