Handlebars & Controls (10)

Can Bus Handlebar Control Module — 48" harness, left mount, chrome

-€35.42

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, left mount,...

Durable CAN bus handlebar switch module with IP66-rated connector. Not for use on Softail models with cruise control.

€100.10 €135.52

$1\" Handlebar — 25.4 mm clamp, 75 cm width, Gloss Black$

-€34.19

DRAG SPECIALTIES 1\" Handlebar — 25.4 mm clamp, 75 cm width, Gloss Black

Seamless steel tubing and a wide range of bends for a custom fit. Made in the U.S.A.

€96.61 €130.80

1" Handlebar — 25.4 mm (1") clamp, 8.75" rise, 30.5" width, Flat Black

-€24.66

DRAG SPECIALTIES 1" Handlebar — 25.4 mm (1") clamp, 8.75" rise, 30.5" width,...

Classic 1" ape-hanger handlebar with seamless steel tubing, smooth unknurled grip area, and notches for throttle-by-wire. Made in the U.S.A.

€83.88 €108.54

1" Handlebar — 1" clamp, 10" center width, Chrome

-€32.50

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 10" center width, Chrome

Seamless-steel handlebar with a wide variety of bends for a tailored fit; made in the U.S.A.

€110.50 €143.00

1" Handlebar — 1" clamp, Wide Ape Hanger, 31" wide, 11.5" rise

-€34.19

DRAG SPECIALTIES 1" Handlebar — 1" clamp, Wide Ape Hanger, 31" wide, 11.5" rise

Seamless steel tubing, multiple bends for a custom fit, made in the U.S.A.

€96.61 €130.80

-€13.99

DRAG SPECIALTIES Switch Cap Kit — Chrome, 13-button

Update black OEM switch caps without replacing the entire switch. Quick, easy installation. Radio and cruise control switches not included (6-piece kit).

€39.56 €53.55

1" Handlebar — 25.4 mm clamp (1"), 78.5 cm width (31"), 34.5 cm rise (13-1/2"), Flat black

-€24.31

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp (1"), 78.5 cm width (31"), 34.5...

Seamless steel tubing, wide variety of bends for a custom fit, made in the U.S.A.

€82.66 €106.97

1" Handlebar — 1" clamp, 1" tube, 31-1/2" width, 15" rise, flat black

-€24.31

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 1" tube, 31-1/2" width, 15" rise,...

Seamless steel tubing for strength and a smooth finish. Wide variety of bends for a tailored fit and feel. Made in the U.S.A.

€82.66 €106.97

1" Handlebar — 1" clamp, 42 cm rise, Flat Black

-€24.11

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 42 cm rise, Flat Black

Seamless steel tubing, multiple bends for a custom fit, made in the U.S.A.

€34.62 €58.73

$Handlebar Riser Clamp — 1\" clamping diameter, Chrome$

-€7.12

DRAG SPECIALTIES Handlebar Riser Clamp — 1\" clamping diameter, Chrome

Two-piece riser clamp that fits most standard risers; easy to install and provides secure hold.

€20.14 €27.26

-€12.93

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10 Pack, Chrome

Replacement pin kit for pivot applications. Includes pins and retaining clips for basic repairs and maintenance.

€36.56 €49.49

-€1.16

DRAG SPECIALTIES Throttle Sleeve — 25.4 mm (1"), Black, Polished

Fits most grips. Smooth twist-throttle action. Easy to install.

€3.27 €4.43

-€12.84

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch, 10 Pack, Black polished

Replacement pin and clip kit for repairing worn or damaged hardware; easy to install.

€36.30 €49.14

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 30" width, Chrome

-€42.06

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 30" width, Chrome

Oversized drag-style handlebar with a knurled center, slotted/notched areas for throttle-by-wire, and hydraulic clutch compatibility. Not for use with stock risers or handlebar clamp/gauge mount on 883C/1200C models.

€118.86 €160.92

Throttle Assembly — 1" handlebar, single cable

-€6.38

DRAG SPECIALTIES Throttle Assembly — 1" handlebar, single cable

Complete dual-cable throttle assembly with matching left-hand grip; accepts thread-in cables. Sold as a kit.

€18.02 €24.40

1-1/4" Buffalo Bar Handlebar — 30" width, Black gloss

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 30" width, Black gloss

Classic 1-1/4" Buffalo Bar handlebar with drag bend and knurled center. Slotted for throttle-by-wire; compatible with hydraulic clutch. Made in the U.S.A.

€73.39 €94.97

Throttle Assembly — 1" handlebar, dual cable, Black, Chrome

-€5.41

DRAG SPECIALTIES Throttle Assembly — 1" handlebar, dual cable, Black, Chrome

Complete dual-cable throttle assembly with matching left-hand grip. Accepts thread-in cables.

€15.30 €20.71

Pivot Pin/Clip Kit — Clutch, Brake, 10-pack, Aluminum, Black Polished

-€13.49

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch, Brake, 10-pack, Aluminum, Black...

Replacement pin kit for clutch and brake pivot points. Pins and retaining clips included for straightforward installation.

€38.14 €51.63

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 30", 1" clamp, Flat Black

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 30", 1" clamp, Flat...

Oversized 1-1/4" drag-style Buffalo handlebar with slotted throttle-by-wire options and knurled center. Compatible with hydraulic clutch; not for use on 883C/1200C stock risers.

€73.39 €94.97

-€1.78

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — Master cylinder, rear

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€5.05 €6.83

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2" width, Black gloss

-€27.35

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 1" clamp, 29-1/2"...

Ultimate 1-1/4" diameter Buffalo-style handlebar, slotted for Throttle-By-Wire, pre-drilled and knurled for secure fit.

€77.30 €104.65

-€2.09

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — rubber, 77360

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.91 €8.00

-€5.19

DRAG SPECIALTIES Handlebar Clamp — 1" (25.4 mm), Chrome

Die-cast handlebar clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes.

€14.66 €19.85

-€1.81

DRAG SPECIALTIES Chrome Plug for Handlebar Clamps — 12 Pack

Fits socket-head screws with 1/4" hex. Sold each; dealer packs of 12.

€5.10 €6.91

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping, 9-1/2" center width, Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping,...

Classic buffalo-style handlebar engineered for comfort. Knurled center to prevent movement, pre-drilled, accepts heated grips, compatible with hydraulic clutch controls.

€186.60 €241.49

Buffalo Handlebar Clamp — 1" clamping diameter, chrome

-€24.93

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, chrome

Billet-style handlebar clamp that strengthens risers and supports 1" handlebars; for 3-1/2" on-center risers with offset holes.

€53.42 €78.35

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 33" width, chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 33" width, chrome

Steel Buffalo bar with knurled center, pre-drilled holes, and Throttle-By-Wire ready. Not compatible with stock risers on 883C/1200C.

€186.60 €241.49

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 30-1/2" width, Chrome

-€73.02

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 30-1/2" width,...

1-1/4" diameter handlebar with 1" clamping area; pre-drilled and notched for Throttle-By-Wire. Compatible with heated grips and hydraulic clutch controls. Not for use with stock risers on 883C/1200C.

€206.36 €279.38

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 30" width, Chrome

-€79.05

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 30" width, Chrome

A versatile Buffalo T-Bar with pre-drilled mounting, knurled center, heated-grip compatibility, and optional gauge mounts. Not for use with stock risers/clamp on 883C/1200C.

€223.40 €302.45

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company