Handlebars & Controls (10)

1" Handlebar — 1" clamp, 31" width, 11-1/2" rise

-€13.08

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 31" width, 11-1/2" rise

Seamless steel tubing; multiple bends for a custom fit; made in the U.S.A.

€117.72 €130.80

-€5.35

DRAG SPECIALTIES Switch Cap Kit — 13 buttons, Chrome

Replace worn switch caps quickly; radio and cruise switches sold separately.

€48.20 €53.55

-€10.70

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 31" width

Classic handlebar with seamless tubing and multiple bends for a personalized fit. Made in the U.S.A.

€96.27 €106.97

1" Handlebar — 25.4 mm clamping diameter, 80 cm width, 38 cm rise

-€10.70

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamping diameter, 80 cm width, 38 cm rise

Seamless steel tubing, wide variety of bends for a custom fit, made in the U.S.A.

€96.27 €106.97

1" Handlebar — 1" clamp, 37.5" width, 16.5" rise, flat black

On sale!
-€5.87

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 37.5" width, 16.5" rise, flat black

Seamless steel tubing and a wide range of bends for a tailored fit. Made in the U.S.A.

€52.86 €58.73

DRAG SPECIALTIES Handlebar Riser Clamp — 1" clamping diameter, Chrome

Two-piece riser clamp for most standard risers and handlebars.

€27.26

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-Pack, Chrome

Replacement pin kit for pivot connections; quick install for routine maintenance.

€49.49

DRAG SPECIALTIES Pivot Pin/Clip Kit — Black, Polished, 10-pack

Replacement kit for restoring secure pivot connections and reducing play.

€48.15

DRAG SPECIALTIES Throttle Sleeve — 25.4 mm (1"), Black, Polished

Replacement throttle sleeve that fits most grips and installs easily.

€4.43

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-pack, black, polished

Replacement pin kit for clutch pivot assemblies.

€49.14

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 30" width, 1" clamp, 5-1/4" clamp width, Chrome

-€16.09

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 30" width, 1"...

1-1/4" diameter Buffalo Bar handlebar built for comfort and control; slotted and notched for Throttle-By-Wire, knurled center, compatible with hydraulic clutch.

€144.83 €160.92

DRAG SPECIALTIES Throttle Assembly — 1" handlebar, single cable

Complete dual-cable throttle assembly with matching left-hand grip; accepts thread-in cables. Sold as a kit.

€24.40

1-1/4" Buffalo Bar Handlebar — 1-1/4" (32 mm), 30" (76 cm), 1" clamp

-€9.50

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" (32 mm), 30" (76 cm), 1"...

Oversized Buffalo bar with slotted/notched sections for Throttle-By-Wire, knurled center for grip, compatible with hydraulic clutch controls, made in the U.S.A.; not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models.

€85.47 €94.97

Throttle Assembly — 25.4 mm (1") handlebar, Dual cable, Black/Chrome

DRAG SPECIALTIES Throttle Assembly — 25.4 mm (1") handlebar, Dual cable,...

Complete dual-cable throttle assembly with matching left-hand grip; accepts thread-in cables. Sold as a kit.

€20.71

-€5.16

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-pack, Black polished

Replacement pivot pin and clip kit for secure, reliable fitment.

€46.47 €51.63

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp, 76 cm (30") width

-€9.50

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4...

Classic 1-1/4" Buffalo Bar with drag-style sweep, slotted for Throttle-By-Wire and compatible with hydraulic clutch controls.

€85.47 €94.97

DRAG SPECIALTIES Throttle Control Adjusting Screw — Chrome

Adjustable screw with spring for precise throttle control.

€3.51

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — Master cylinder, rear

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€6.83

$1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm (1\"), Black$

-€10.47

DRAG SPECIALTIES 1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm...

Classic Buffalo sweep handlebar engineered for comfort, secure center knurling, and Throttle-By-Wire compatibility.

€94.18 €104.65

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — rubber, 77360

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€8.00

Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17 models

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17...

Die-cast handlebar clamp for compatible models with on-center risers and offset mounting holes.

€19.85

DRAG SPECIALTIES Chrome Plug for Handlebar Clamps — 12 Pack

Fits any socket-head screw with 1/4\" hex. Sold individually to consumers; dealers sold in packs of 12.

€6.91

1-1/4" Buffalo Bar Handlebar — 32 mm diameter, 25.4 mm clamp, 89 cm width, Chrome

-€24.15

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm diameter, 25.4 mm clamp,...

Oversized Buffalo bar designed for comfort, with knurled center, pre-drilled holes for heated grips, and Throttle-By-Wire readiness. Made in the U.S.A.; not compatible with stock risers on 883C/1200C models.

€217.34 €241.49

Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2" on-center risers

-€7.83

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2"...

Billet-aluminum clamp that covers the full clamping area, fits 1" bars sized from 1-1/4", for use with 3-1/2" on-center risers. Made in the USA.

€70.52 €78.35

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"), 25.4 mm (1"), Chrome

-€24.15

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"),...

Classic buffalo-bend handlebar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility. Made in the U.S.A.; compatible with hydraulic clutch controls.

€217.34 €241.49

1-1/4" Buffalo Bar Handlebar — 25.4 mm (1") clamp, 77.5 cm (30-1/2") width, Chrome

-€27.94

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 25.4 mm (1") clamp, 77.5 cm...

Comfort-focused 1-1/4" handlebar with TBW-ready slots; made in the U.S.A. Not for use on 883C/1200C stock riser setups.

€251.44 €279.38

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€32.78

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€295.05 €327.83

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.5" , Black

-€32.79

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Ductile cast-iron sleeved cylinders pressed into aluminum castings. Sleeve ribs lock to the casting; finished slightly undersized for final honing. Ideal for stock replacement.

€295.13 €327.92

Riser + Triple Tree — 32 mm clamp, black anodized

-€91.59
New

Riser + Triple Tree — 32 mm clamp, black anodized

Clubstyle pullback riser kit for digital speedo.

Integrated cable channels and torque bar clamp included.

Fits 32 mm handlebars; 3D CNC machined aluminum with mounting hardware and cable covers.

€915.97 €1,007.56

-€132.09
New

Riser + Triple Tree — 32 mm handlebar, Anodized Black, Kit

Pullback risers with integrated cable routing and Torque Bar clamp; fits 32 mm handlebars; 3D CNC aluminum construction.

€1,320.85 €1,452.94

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company