Handlebars & Controls (10)

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp, 76 cm (30") width

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4...

Classic 1-1/4" Buffalo Bar with drag-style sweep, slotted for Throttle-By-Wire and compatible with hydraulic clutch controls.

€73.39 €94.97

-€1.78

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — Master cylinder, rear

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€5.05 €6.83

$1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm (1\"), Black$

-€27.35

DRAG SPECIALTIES 1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm...

Classic Buffalo sweep handlebar engineered for comfort, secure center knurling, and Throttle-By-Wire compatibility.

€77.30 €104.65

-€2.09

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — rubber, 77360

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.91 €8.00

Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17 models

-€5.19

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17...

Die-cast handlebar clamp for compatible models with on-center risers and offset mounting holes.

€14.66 €19.85

-€1.81

DRAG SPECIALTIES Chrome Plug for Handlebar Clamps — 12 Pack

Fits any socket-head screw with 1/4\" hex. Sold individually to consumers; dealers sold in packs of 12.

€5.10 €6.91

1-1/4" Buffalo Bar Handlebar — 32 mm diameter, 25.4 mm clamp, 89 cm width, Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm diameter, 25.4 mm clamp,...

Oversized Buffalo bar designed for comfort, with knurled center, pre-drilled holes for heated grips, and Throttle-By-Wire readiness. Made in the U.S.A.; not compatible with stock risers on 883C/1200C models.

€186.60 €241.49

Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2" on-center risers

-€24.93

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2"...

Billet-aluminum clamp that covers the full clamping area, fits 1" bars sized from 1-1/4", for use with 3-1/2" on-center risers. Made in the USA.

€53.42 €78.35

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"), 25.4 mm (1"), Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"),...

Classic buffalo-bend handlebar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility. Made in the U.S.A.; compatible with hydraulic clutch controls.

€186.60 €241.49

1-1/4" Buffalo Bar Handlebar — 25.4 mm (1") clamp, 77.5 cm (30-1/2") width, Chrome

-€73.02

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 25.4 mm (1") clamp, 77.5 cm...

Comfort-focused 1-1/4" handlebar with TBW-ready slots; made in the U.S.A. Not for use on 883C/1200C stock riser setups.

€206.36 €279.38

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 30" width, Chrome

-€79.05

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 30" width, Chrome

A versatile Buffalo T-Bar with pre-drilled mounting, knurled center, heated-grip compatibility, and optional gauge mounts. Not for use with stock risers/clamp on 883C/1200C.

€223.40 €302.45

1-1/2" "Big" Buffalo Beach Bar Handlebar — 38 mm (1-1/2") clamp, 87.5 cm (34-1/2") width, 11.5 cm (4-1/2") rise

-€71.48

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Beach Bar Handlebar — 38 mm (1-1/2")...

Big, fat Buffalo beach bar with custom bends for comfort; fits ’96 and newer controls; made in the U.S.A.

€202.05 €273.53

1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping, 32-1/2" width, Black

-€37.99

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping,...

Aggressive drag-style handlebar with knurled center and pre-drilled mounting; accepts heated grips and requires special risers.

€129.16 €167.15

1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 10" rise, 30-1/2" width, Black gloss

-€59.62

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 10" rise, 30-1/2"...

Bold T-bar handlebar with custom bends for improved comfort. Pre-drilled; optional gauge mounts available separately. Compatible with most '99+ Harley-Davidson models. Accepts heated grips and hydraulic clutch. Made in the U.S.A.