Handlebars & Controls (10)

1" Handlebar — 72.5 cm (28-1/2"), 25.4 mm (1"), Flat Black

-€24.66

DRAG SPECIALTIES 1" Handlebar — 72.5 cm (28-1/2"), 25.4 mm (1"), Flat Black

Seamless steel tubing, multiple bends for a tailored fit, and made in the U.S.A.

€83.88 €108.54

1" Handlebar — 25.4 mm clamp, 38 cm rise, Chrome

-€32.50

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 38 cm rise, Chrome

Seamless steel tubing and a wide selection of bends for a personalized fit. Made in the U.S.A.

€110.50 €143.00

Custom Handlebar and Riser Mounting Bolts — 1/2-20, 1.5" length, Black

-€0.50

DRAG SPECIALTIES Custom Handlebar and Riser Mounting Bolts — 1/2-20, 1.5"...

Precision mounting bolts for handlebars and risers. Made in the USA. Easy installation with standard tools.

€1.42 €1.92

Can Bus Handlebar Control Module — 48" harness, left mount, chrome

-€35.42

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, left mount,...

IP66-rated handlebar control module with included switch and wire harness. Not for use with Softail models that feature cruise control.

€100.10 €135.52

1" Handlebar — Narrow ape hanger, 25.4 mm clamp, 43 cm rise

-€34.19

DRAG SPECIALTIES 1" Handlebar — Narrow ape hanger, 25.4 mm clamp, 43 cm rise

Seamless steel tubing for strength and smooth feel
Wide variety of bends for a tailored fit
Made in the U.S.A.

€96.61 €130.80

1" Handlebar — 1" clamp, 30.5" width, 8-3/4" rise, Flat Black

-€24.66

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 30.5" width, 8-3/4" rise, Flat Black

Seamless steel tubing, multiple bends for a custom fit, made in the U.S.A.

€83.88 €108.54

1" Handlebar — 31" width, 12" height, 1" clamp, Chrome

-€32.50

DRAG SPECIALTIES 1" Handlebar — 31" width, 12" height, 1" clamp, Chrome

Seamless steel tubing; wide variety of bends for a precise fit; made in the U.S.A.

€110.50 €143.00

1" Handlebar — 1" clamp, 31" width, 11-1/2" rise

-€34.19

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 31" width, 11-1/2" rise

Seamless steel tubing; multiple bends for a custom fit; made in the U.S.A.

€96.61 €130.80

-€13.99

DRAG SPECIALTIES Switch Cap Kit — 13 buttons, Chrome

Replace worn switch caps quickly; radio and cruise switches sold separately.

€39.56 €53.55

-€24.31

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 31" width

Classic handlebar with seamless tubing and multiple bends for a personalized fit. Made in the U.S.A.

€82.66 €106.97

1" Handlebar — 25.4 mm clamping diameter, 80 cm width, 38 cm rise

-€24.31

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamping diameter, 80 cm width, 38 cm rise

Seamless steel tubing, wide variety of bends for a custom fit, made in the U.S.A.

€82.66 €106.97

1" Handlebar — 1" clamp, 37.5" width, 16.5" rise, flat black

-€24.11

DRAG SPECIALTIES 1" Handlebar — 1" clamp, 37.5" width, 16.5" rise, flat black

Seamless steel tubing and a wide range of bends for a tailored fit. Made in the U.S.A.

€34.62 €58.73

Handlebar Riser Clamp — 1" clamping diameter, Chrome

-€7.12

DRAG SPECIALTIES Handlebar Riser Clamp — 1" clamping diameter, Chrome

Two-piece riser clamp for most standard risers and handlebars.

€20.14 €27.26

-€12.93

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-Pack, Chrome

Replacement pin kit for pivot connections; quick install for routine maintenance.

€36.56 €49.49

-€1.16

DRAG SPECIALTIES Throttle Sleeve — 25.4 mm (1"), Black, Polished

Replacement throttle sleeve that fits most grips and installs easily.

€3.27 €4.43

-€12.84

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-pack, black, polished

Replacement pin kit for clutch pivot assemblies.

€36.30 €49.14

1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 30" width, 1" clamp, 5-1/4" clamp width, Chrome

-€42.06

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" dia, 30" width, 1"...

1-1/4" diameter Buffalo Bar handlebar built for comfort and control; slotted and notched for Throttle-By-Wire, knurled center, compatible with hydraulic clutch.

€118.86 €160.92

Throttle Assembly — 1" handlebar, single cable

-€6.38

DRAG SPECIALTIES Throttle Assembly — 1" handlebar, single cable

Complete dual-cable throttle assembly with matching left-hand grip; accepts thread-in cables. Sold as a kit.

€18.02 €24.40

1-1/4" Buffalo Bar Handlebar — 1-1/4" (32 mm), 30" (76 cm), 1" clamp

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" (32 mm), 30" (76 cm), 1"...

Oversized Buffalo bar with slotted/notched sections for Throttle-By-Wire, knurled center for grip, compatible with hydraulic clutch controls, made in the U.S.A.; not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models.

€73.39 €94.97

Throttle Assembly — 25.4 mm (1") handlebar, Dual cable, Black/Chrome

-€5.41

DRAG SPECIALTIES Throttle Assembly — 25.4 mm (1") handlebar, Dual cable,...

Complete dual-cable throttle assembly with matching left-hand grip; accepts thread-in cables. Sold as a kit.

€15.30 €20.71

-€13.49

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-pack, Black polished

Replacement pivot pin and clip kit for secure, reliable fitment.

€38.14 €51.63

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp, 76 cm (30") width

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4...

Classic 1-1/4" Buffalo Bar with drag-style sweep, slotted for Throttle-By-Wire and compatible with hydraulic clutch controls.

€73.39 €94.97

-€1.78

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — Master cylinder, rear

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€5.05 €6.83

$1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm (1\"), Black$

-€27.35

DRAG SPECIALTIES 1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm...

Classic Buffalo sweep handlebar engineered for comfort, secure center knurling, and Throttle-By-Wire compatibility.

€77.30 €104.65

-€2.09

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — rubber, 77360

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.91 €8.00

Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17 models

-€5.19

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17...

Die-cast handlebar clamp for compatible models with on-center risers and offset mounting holes.

€14.66 €19.85

-€1.81

DRAG SPECIALTIES Chrome Plug for Handlebar Clamps — 12 Pack

Fits any socket-head screw with 1/4\" hex. Sold individually to consumers; dealers sold in packs of 12.

€5.10 €6.91

1-1/4" Buffalo Bar Handlebar — 32 mm diameter, 25.4 mm clamp, 89 cm width, Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm diameter, 25.4 mm clamp,...

Oversized Buffalo bar designed for comfort, with knurled center, pre-drilled holes for heated grips, and Throttle-By-Wire readiness. Made in the U.S.A.; not compatible with stock risers on 883C/1200C models.

€186.60 €241.49

Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2" on-center risers

-€24.93

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2"...

Billet-aluminum clamp that covers the full clamping area, fits 1" bars sized from 1-1/4", for use with 3-1/2" on-center risers. Made in the USA.

€53.42 €78.35

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"), 25.4 mm (1"), Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"),...

Classic buffalo-bend handlebar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility. Made in the U.S.A.; compatible with hydraulic clutch controls.

€186.60 €241.49

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company