Exhaust

-€2.07

DRAG SPECIALTIES O2 Sensor Plug — 18 mm x 1.5 mm thread

Seals unused O2 sensor ports. Sold individually. Made in the U.S.A.

€4.43 €6.50

-€5.97

DRAG SPECIALTIES Weld-in O2 Sensor Bungs — 18 mm x 1.5 mm, pair

Weld-in O2 sensor bungs for installing oxygen sensors in exhaust systems. Weld-in style. Sold as a pair.

€12.80 €18.77

-€6.69

DRAG SPECIALTIES Weld-in O2 Sensor Bungs — 12 mm, 1.25 mm pitch, pair

Weld-in style O2 sensor bungs for installing oxygen sensors in exhaust systems.

€14.33 €21.02

-€2.07

DRAG SPECIALTIES O2 Sensor Plug — 12 mm x 1.25 mm

Seals unused O2 sensor ports; sold individually. Made in the U.S.A.

€4.43 €6.50

-€9.31

DRAG SPECIALTIES O2 Sensor Bung Adapter Kit — adapts 18 mm - 12 mm

Converts 18 mm exhaust bungs to 12 mm; includes two adapters, extension wire and connectors.

€26.32 €35.63

-€10.92

DRAG SPECIALTIES Exhaust Heat Wrap Kit — 7.6 m (25'), 25.4 mm (1"), beige

Fiberglass exhaust wrap kit rated for high temperatures; includes four 14" stainless steel locking ties. Made in the U.S.A.

€30.86 €41.78

Exhaust Heat Wrap Kit — 25' (7.6 m), 1" (25.4 mm), Black

-€11.67

DRAG SPECIALTIES Exhaust Heat Wrap Kit — 25' (7.6 m), 1" (25.4 mm), Black

High-temperature fiberglass exhaust wrap rated 1,200°F/2,000°F with four 14" stainless steel locking ties; made in the USA.

€32.99 €44.66

-€24.49

DRAG SPECIALTIES Exhaust Heat Wrap Kit — 25', 2" tan

Wraps pipes and mufflers to contain heat. Includes four 14" stainless steel locking ties. Made in the U.S.A.

€69.20 €93.69

Exhaust Heat Wrap Kit — 25' length, 2" width, Black

-€15.56

DRAG SPECIALTIES Exhaust Heat Wrap Kit — 25' length, 2" width, Black

High-temperature fiberglass exhaust wrap kit with four stainless steel locking ties; replacement ties sold separately.

€43.95 €59.51

-€5.35

DRAG SPECIALTIES Stainless Steel Cable Tie — 14" (35.5 cm), 5 Pack

Heavy-duty cable tie with ball bearing and barb fastening that locks tightly for extra-strength applications. Made in the U.S.A.

€15.13 €20.48

-€4.50

DRAG SPECIALTIES Stainless Steel Cable Tie — 20.5 cm (8"), 5 pack

Ball bearing and barb fastening assembly; locks tightly and will not slip. Great for high-temperature areas. Made in the U.S.A.

€12.70 €17.20

-€5.97

DRAG SPECIALTIES Worm Clamp — 31.8–57.2 mm, Stainless Steel, 4 Pack

Narrow design with a low-profile head. Secures exhaust heat wraps and other high-temperature applications. Made in the U.S.A.

€16.89 €22.86

-€6.18

DRAG SPECIALTIES Worm Clamp — 57.2–82.6 mm, 4 Pack

Narrow, low-profile design secures heat wraps and performs in extreme temperatures. Made in the U.S.A.

€17.45 €23.63

-€11.48

DRAG SPECIALTIES Weld-in O2 Sensor Bungs — 12 mm x 1.25 mm, 45°

Weld-in bungs let you install O2 sensors into exhaust systems. Weld-in style provides a permanent mounting solution.

€24.59 €36.07

Muffler Packing — 40.5 cm (16") length, 28 cm (11") width

-€6.21

DRAG SPECIALTIES Muffler Packing — 40.5 cm (16") length, 28 cm (11") width

High-temperature muffler packing rated to 1,200°F. Split-design for double use. Made in the U.S.A.

€17.57 €23.78

-€1.80

DRAG SPECIALTIES Rubber Muffler Mounts — Black

High-quality replacement component. Support kit and replacement bracket sold separately. Sold in pairs.

€5.09 €6.89

-€13.62

FEULING OIL PUMP CORP. 18 mm Oxygen Sensor — Length 32 cm

High-precision zirconia ceramic oxygen sensor for reliable emissions control and improved fuel economy.

€52.99 €66.61

-€13.62

FEULING OIL PUMP CORP. 18 mm Oxygen Sensor — Black

Precision ceramic zirconium dioxide sensing element
Surface platinum electrodes and porous ceramic resist contamination
Prevents erosion and preserves accurate readings
Can restore fuel economy and drivability compared with slow sensors
Typical life: 30,000–50,000 miles; OE-level quality; made in the U.S.A.

€52.99 €66.61

-€9.83

DRAG SPECIALTIES Heavy-Duty Exhaust Flange Kit — Polished

Includes two flanges and two retaining rings; thicker flanges reduce distortion. Replacement retaining rings sold separately.

€27.80 €37.63

-€3.42

DRAG SPECIALTIES Exhaust Baffle — 21 cm (8-1/4"), 57.2 mm (2-1/4")

Fiberglass-wrapped steel construction; may require drilling in the exhaust pipe for installation.

€9.67 €13.09

Exhaust Baffle — 76.2 mm (3") outside diameter, 20.5 cm (8") length

-€4.20

DRAG SPECIALTIES Exhaust Baffle — 76.2 mm (3") outside diameter, 20.5 cm (8")...

Reduces exhaust noise and improves backpressure. Fiberglass-wrapped construction; may require drilling for installation.

€11.85 €16.05

-€1.96

DRAG SPECIALTIES Exhaust Bracket Tab — U-08-0223, Zinc-plated

Bracket that secures the rear header pipe to the starter bracket exhaust mount for stable support and reduced vibration.

€5.55 €7.51

$12 mm Oxygen Sensor — 12 mm thread, 73.5 cm (29\"), 4-wire, black$

-€18.49

FEULING OIL PUMP CORP. 12 mm Oxygen Sensor — 12 mm thread, 73.5 cm (29\"), 4-wire, black

High-precision zirconia oxygen sensor improves fuel economy, emissions, and drivability; meets or exceeds OE specifications.

€71.90 €90.39

-€18.49

FEULING OIL PUMP CORP. 12 mm Oxygen Sensor — 4-wire, 73.5 cm (29"), front

High-precision 12 mm oxygen sensor with stabilized zirconia element. Improves fuel economy and emissions, meets OE specs. Typical life 30,000–50,000 miles.

€71.90 €90.39

-€3.03

FEULING OIL PUMP CORP. O2 Sensor Adapters — 18 mm to 12 mm, Pair

Adapts larger O2 sensor ports to accept smaller sensors. Made in the U.S.A.

€11.80 €14.83

-€6.94

DRAG SPECIALTIES Rear Exhaust Pipe Bracket — Rear, Chrome

High-quality replacement component with zinc-plated steel construction for corrosion resistance.

€19.61 €26.55

-€17.35

DRAG SPECIALTIES Woven Basalt Exhaust Wrap Kit — 7.6 m (25'), 50.8 mm (2"), bronze

High-temperature woven basalt exhaust wrap rated 1800°F continuous / 2500°F intermittent. Includes four 14" stainless steel ball-bearing, barb-locking ties; glossy bronze finish; made in the U.S.A.

€49.02 €66.37

-€2.87

DRAG SPECIALTIES O2 Port Bushing Adapter — Adapts 18 mm to 12 mm

Adapter bushing for oxygen sensor ports that enables use of a smaller sensor. Precision machined for reliable fitment.

€6.15 €9.02

-€4.60

DRAG SPECIALTIES FXR Exhaust Mount Front Bracket — Chrome

Front exhaust bracket for FXR frames; suited for custom frame applications.

€13.00 €17.60

-€20.82

FEULING OIL PUMP CORP. 12 mm Oxygen Sensor — O2, Front/Rear, Black

High-precision zirconia oxygen sensor improves fuel economy and emissions; meets or exceeds OE specifications.

€81.95 €102.77

Exhaust

Contact us

Products

Our company