Intake

Fuel Tank Crossover Line — 7.9 mm (5/16"), 117 mm (4-5/8"), Silver

-€7.60

DRAG SPECIALTIES Fuel Tank Crossover Line — 7.9 mm (5/16"), 117 mm (4-5/8"),...

Replaces stock rubber lower crossover lines with stainless steel lines and compression fittings; made in the USA.

€21.49 €29.09

-€3.05

EMGO Universal Fuel Line — 4.8 mm (3/16"), 25' (7.6 m)

Universal fuel line for general-purpose routing; do not use with fuel containing more than 10% alcohol.

€5.66 €8.71

Universal Fuel Line — 1/4" ID, 25' length, Black

-€4.80

EMGO Universal Fuel Line — 1/4" ID, 25' length, Black

Universal fuel line for general automotive and powersports use. Not for fuels over 10% alcohol.

€8.92 €13.72

-€5.92

EMGO Universal Fuel Line — 5/16" (7.9 mm), 25' (7.6 m), Black

Universal 25' fuel line. Not for use with fuels over 10% alcohol.

€11.00 €16.92

-€1.91

DRAG SPECIALTIES Replacement Washers — Fuel Line, Silver, 6-pack

Replacement washers for fuel tank crossover lines. Durable construction; made in the USA.

€3.54 €5.45

-€95.34

MIKUNI HSR45 Smoothbore Carburetor Easy Kit — 45.00 mm (1.77")

Easy-install smoothbore carburetor kit improves throttle response; includes hardware and instructions. Not compatible with cruise control models.

€370.76 €466.10

Bob Retro-Style Air Cleaner Kit — 5.50" diameter, Chrome, Super E and G

-€17.18

DRAG SPECIALTIES Bob Retro-Style Air Cleaner Kit — 5.50" diameter, Chrome,...

Retro-style round air cleaner kit with included mounting hardware and a reusable foam filter element.

€48.53 €65.71

Colored Hose Clamps for Oil Lines — 6-pack, for 3/8" oil lines, black

-€13.78

NAMZ Colored Hose Clamps for Oil Lines — 6-pack, for 3/8" oil...

Custom-colored hose clamps for braided copper and stainless steel hoses; designed to fit over most manufacturers' braided rubber lines and provide a clean finished look.

€26.75 €40.53

-€14.13

NAMZ Colored Hose Clamps for Oil Lines — 3/8" oil lines, Gold, 6 pack

Custom-colored hose clamps for braided copper, stainless steel, and most manufacturers' braided rubber oil lines. Extruded from brass. Made in the USA.

€27.44 €41.57

-€6.52

DRAG SPECIALTIES Repair Kit for Bendix Carburetor — Black, Red, Blue, Gray

Complete gasket and seal kit with accelerator pump for rebuilding Bendix carburetors.

€18.43 €24.95

-€7.02

DRAG SPECIALTIES Air Cleaner Adapter — Dragtron II, Machined

Adapter that enables installation of compatible air cleaner assemblies to the intake system.

€19.83 €26.85

-€10.07

DRAG SPECIALTIES EFI Fuel Line — Black, T02-0089

Direct OEM-quality replacement EFI fuel line from tank to fuel rail. Includes connectors for straightforward installation.

€28.47 €38.54

$Fuel Inlet Fitting — 6.4 mm (1/4\") fuel line, Gold$

-€1.47

DRAG SPECIALTIES Fuel Inlet Fitting — 6.4 mm (1/4\") fuel line, Gold

Durable fuel inlet fitting with a compact design for easy installation. Sold each.

€4.16 €5.63

-€11.50

DRAG SPECIALTIES EFI Fuel Line — Black, T02-0090

Direct-fit replacement fuel line for the run from tank to fuel rail. Includes necessary connectors and OEM-quality construction.

€32.50 €44.00

-€4.66

DRAG SPECIALTIES Carburetor Rebuild Kit for Keihin — For butterfly carburetors

Complete kit with gaskets, seals, jets and needles to rebuild butterfly-style or CV-style Keihin carburetors.

€13.16 €17.82

-€4.73

DRAG SPECIALTIES Carburetor Rebuild Kit for Keihin — For CV carburetors, Black

Complete kit to rebuild butterfly-style and CV-style Keihin carburetors.

€13.35 €18.08

-€11.45

DRAG SPECIALTIES EFI Fuel Line — Black

High-quality OEM replacement that replaces the fuel line from the tank to the fuel rail and includes necessary connectors.

€32.38 €43.83

-€13.00

DRAG SPECIALTIES Carburetor Rebuild Kit for Mikuni — Black

Includes all required parts to completely rebuild a carburetor. Fits HSR42/45mm carburetors.

€24.15 €37.15

-€13.75

DRAG SPECIALTIES Rebuild Kit for Linkert Carburetor — Gold finish

Complete rebuild kit includes foam float, needle, seat, gaskets, springs and bushings to restore fuel metering and smooth operation.

€38.88 €52.63

-€10.27

DRAG SPECIALTIES Fuel & Oil Line — 6.3 mm (1/4"), 91 cm (3'), Black

Reinforced synthetic rubber, smooth-bore line resistant to fuel and oil. Made in the USA.

€19.07 €29.34

-€8.99

DRAG SPECIALTIES Fuel & Oil Line — 7.9 mm (5/16"), 91 cm (3'), Black

Reinforced synthetic rubber fuel and oil line with a smooth bore; made in the USA.

€16.70 €25.69

Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm (5/16"), 6 pack, Chrome

-€13.65

NAMZ Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm...

Custom-colored hose clamps for braided copper, stainless and most braided rubber fuel hoses. Suitable for FXST and custom bikes; made in USA.

€26.50 €40.15

-€1.95

FUEL-TOOL Replacement O-Ring for Fuel Check Valve — Viton, Black

Durable replacement O-ring for fuel check valves. Prevents unnecessary replacement of the check valve and fuel line; made from high-quality Dupont® Viton®; made in the USA.

€3.62 €5.57

$Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"), Fuel-injected$

-€1.91

DRAG SPECIALTIES Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"),...

Internal line that routes fuel from the pump to the filter for reliable delivery.

€5.41 €7.32

-€8.08

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel injected, Clear, Silver

Includes check valve, required fittings and line; meets or exceeds OEM requirements.

€22.84 €30.92

Fuel Check Valve Assembly — Fuel injected, T03-0084NU, Clear, Silver

-€8.08

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel injected, T03-0084NU, Clear,...

Includes check valve, required fittings and line. Meets or exceeds OEM requirements.

€22.84 €30.92

-€8.60

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel injected, silver

Includes check valve, required fittings and line; meets or exceeds OEM requirements.

€24.28 €32.88

-€8.08

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel Injected, Clear, Silver

Includes check valve, fittings and line; meets or exceeds OEM requirements for reliable fuel flow.

€22.84 €30.92

-€8.30

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel injected, clear, silver

Complete assembly with check valve, fittings and line; meets or exceeds OEM requirements.

€23.45 €31.75

-€8.30

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel-injected, silver

Includes valve, required fittings and line; engineered to meet or exceed OEM requirements.

€23.45 €31.75

shop by category

Intake

Intake

Subcategories

Air Cleaners

Carburetors & Accesories

Fuel Injection

Fuel pumps and lines

Contact us

Products

Our company

shop by category

Intake  

Intake

Subcategories

Air Cleaners

Carburetors & Accesories

Fuel Injection

Fuel pumps and lines

Intake