Intake

Fuel Tank Crossover Line — 7.9 mm (5/16"), 117 mm (4-5/8"), Silver

-€7.60

DRAG SPECIALTIES Fuel Tank Crossover Line — 7.9 mm (5/16"), 117 mm (4-5/8"),...

Replaces stock rubber lower crossover lines with stainless steel lines and compression fittings; made in the USA.

€21.49 €29.09

Twin Tuner II Fuel Injection Controller — 4 in x 2 in x 0.5 in, Black

-€82.83

DAYTONA TWIN TEC LLC Twin Tuner II Fuel Injection Controller — 4 in x 2 in x 0.5...

Compact fuel-injection and ignition controller that enables on-bike trimming via pushbuttons and advanced PC tuning with USB and PC Link Tuner; supports independent cylinder adjustments and Twin Scan II+ workflow.

€322.13 €404.96

Twin Tuner II Fuel Injection Controller — 4" L x 2" W x 1/2" H, Black

-€53.99

DAYTONA TWIN TEC LLC Twin Tuner II Fuel Injection Controller — 4" L x 2" W x 1/2"...

Easily adjusts OEM Delphi fuel injection and ignition for many performance parts
Bright LED displays fuel trim; mode and up/down buttons for quick tuning
Advanced tuning via optional USB interface and PC Link Tuner; independent front/rear control
Includes ignition timing control; plug-in installation with no splicing
Compact size: 4" L x 2" W x 1/2" H

€157.17 €211.16

-€2.28

EMGO Universal Fuel Line — 4.8 mm (3/16"), 25' (7.6 m)

Universal fuel line for general-purpose routing; do not use with fuel containing more than 10% alcohol.

€6.43 €8.71

Universal Fuel Line — 1/4" ID, 25' length, Black

-€3.58

EMGO Universal Fuel Line — 1/4" ID, 25' length, Black

Universal fuel line for general automotive and powersports use. Not for fuels over 10% alcohol.

€10.14 €13.72

-€4.42

EMGO Universal Fuel Line — 5/16" (7.9 mm), 25' (7.6 m), Black

Universal 25' fuel line. Not for use with fuels over 10% alcohol.

€12.50 €16.92

-€17.88

DAYTONA TWIN TEC LLC Oxygen Sensor Active Intake and Exhaust Eliminator Kit — Black

Prevents diagnostic trouble codes when installing aftermarket filters and exhaust
Enables air/fuel ratio changes for racing applications
Made in the USA
For off-road racing use only

€69.52 €87.40

-€1.43

DRAG SPECIALTIES Replacement Washers — Fuel Line, Silver, 6-pack

Replacement washers for fuel tank crossover lines. Durable construction; made in the USA.

€4.02 €5.45

Bob Retro-Style Air Cleaner Kit — 5.50" diameter, Chrome, Super E and G

-€17.18

DRAG SPECIALTIES Bob Retro-Style Air Cleaner Kit — 5.50" diameter, Chrome,...

Retro-style round air cleaner kit with included mounting hardware and a reusable foam filter element.

€48.53 €65.71

Colored Hose Clamps for Oil Lines — 6-pack, for 3/8" oil lines, black

-€10.13

NAMZ Colored Hose Clamps for Oil Lines — 6-pack, for 3/8" oil...

Custom-colored hose clamps for braided copper and stainless steel hoses; designed to fit over most manufacturers' braided rubber lines and provide a clean finished look.

€30.40 €40.53

-€10.39

NAMZ Colored Hose Clamps for Oil Lines — 3/8" oil lines, Gold, 6 pack

Custom-colored hose clamps for braided copper, stainless steel, and most manufacturers' braided rubber oil lines. Extruded from brass. Made in the USA.

€31.18 €41.57

-€6.52

DRAG SPECIALTIES Repair Kit for Bendix Carburetor — Black, Red, Blue, Gray

Complete gasket and seal kit with accelerator pump for rebuilding Bendix carburetors.

€18.43 €24.95

-€7.02

DRAG SPECIALTIES Air Cleaner Adapter — Dragtron II, Machined

Adapter that enables installation of compatible air cleaner assemblies to the intake system.

€19.83 €26.85

-€10.07

DRAG SPECIALTIES EFI Fuel Line — Black, T02-0089

Direct OEM-quality replacement EFI fuel line from tank to fuel rail. Includes connectors for straightforward installation.

€28.47 €38.54

$Fuel Inlet Fitting — 6.4 mm (1/4\") fuel line, Gold$

-€1.47

DRAG SPECIALTIES Fuel Inlet Fitting — 6.4 mm (1/4\") fuel line, Gold

Durable fuel inlet fitting with a compact design for easy installation. Sold each.

€4.16 €5.63

-€11.50

DRAG SPECIALTIES EFI Fuel Line — Black, T02-0090

Direct-fit replacement fuel line for the run from tank to fuel rail. Includes necessary connectors and OEM-quality construction.

€32.50 €44.00

-€4.66

DRAG SPECIALTIES Carburetor Rebuild Kit for Keihin — For butterfly carburetors

Complete kit with gaskets, seals, jets and needles to rebuild butterfly-style or CV-style Keihin carburetors.

€13.16 €17.82

-€4.73

DRAG SPECIALTIES Carburetor Rebuild Kit for Keihin — For CV carburetors, Black

Complete kit to rebuild butterfly-style and CV-style Keihin carburetors.

€13.35 €18.08

-€11.45

DRAG SPECIALTIES EFI Fuel Line — Black

High-quality OEM replacement that replaces the fuel line from the tank to the fuel rail and includes necessary connectors.

€32.38 €43.83

-€9.71

DRAG SPECIALTIES Carburetor Rebuild Kit for Mikuni — Black

Includes all required parts to completely rebuild a carburetor. Fits HSR42/45mm carburetors.

€27.44 €37.15

-€13.75

DRAG SPECIALTIES Rebuild Kit for Linkert Carburetor — Gold finish

Complete rebuild kit includes foam float, needle, seat, gaskets, springs and bushings to restore fuel metering and smooth operation.

€38.88 €52.63

-€7.67

DRAG SPECIALTIES Fuel & Oil Line — 6.3 mm (1/4"), 91 cm (3'), Black

Reinforced synthetic rubber, smooth-bore line resistant to fuel and oil. Made in the USA.

€21.67 €29.34

EFI Fuel Line Fitting Cover — Fuel Injected, Chrome

-€4.89

DRAG SPECIALTIES EFI Fuel Line Fitting Cover — Fuel Injected, Chrome

Covers the OEM fitting at the tank bottom. Two-piece design for easy installation.

€13.82 €18.71

Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm (5/16"), 6 pack, Chrome

-€10.04

NAMZ Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm...

Custom-colored hose clamps for braided copper, stainless and most braided rubber fuel hoses. Suitable for FXST and custom bikes; made in USA.

€30.11 €40.15

-€1.46

FUEL-TOOL Replacement O-Ring for Fuel Check Valve — Viton, Black

Durable replacement O-ring for fuel check valves. Prevents unnecessary replacement of the check valve and fuel line; made from high-quality Dupont® Viton®; made in the USA.

€4.11 €5.57

$Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"), Fuel-injected$

-€1.91

DRAG SPECIALTIES Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"),...

Internal line that routes fuel from the pump to the filter for reliable delivery.

€5.41 €7.32

-€8.08

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel injected, Clear, Silver

Includes check valve, required fittings and line; meets or exceeds OEM requirements.

€22.84 €30.92

Fuel Check Valve Assembly — Fuel injected, T03-0084NU, Clear, Silver

-€8.08

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel injected, T03-0084NU, Clear,...

Includes check valve, required fittings and line. Meets or exceeds OEM requirements.

€22.84 €30.92

-€8.08

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel Injected, Clear, Silver

Includes check valve, fittings and line; meets or exceeds OEM requirements for reliable fuel flow.

€22.84 €30.92

-€8.30

DRAG SPECIALTIES Fuel Check Valve Assembly — Fuel injected, clear, silver

Complete assembly with check valve, fittings and line; meets or exceeds OEM requirements.

€23.45 €31.75

shop by category

Intake

Intake

Subcategories

Air Cleaners

Carburetors & Accesories

Fuel Injection

Fuel pumps and lines

Contact us

Products

Our company

shop by category

Intake  

Intake

Subcategories

Air Cleaners

Carburetors & Accesories

Fuel Injection

Fuel pumps and lines

Intake