Electrical & Ignition

-€2.60

POWERMADD E3 Resistor Spark Plug — 14 mm thread, 19.1 mm reach, 20.6 mm hex

Diamond Fire electrode design yields faster, more complete combustion for improved engine performance.

€7.35 €9.95

-€2.60

POWERMADD E3 Resistor Spark Plug — 12 mm, 19.1 mm reach

Unique Diamond Fire electrode shape for faster ignition, more complete combustion, and improved engine performance.

€7.35 €9.95

E3 Resistor Spark Plug — Thread Reach 19.1 mm (3/4 in), Thread Size 10 mm, Hex 16 mm (5/8 in), Heat Range 8

-€2.86

POWERMADD E3 Resistor Spark Plug — Thread Reach 19.1 mm (3/4 in), Thread...

Diamond Fire electrode design for faster, more complete combustion and improved engine performance.

€8.08 €10.94

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€4.55

BARKBUSTERS LED Indicator Resistor — LED-RES-001

10 ohm resistor set (2) to correct LED indicator flash rate. Use only with LED Amber Light – Indicator (0635-2280).

€14.55 €19.10

-€7.36

PINGEL Tether Cord with Wristband — Black

Secure tether cord with adjustable wristband for keys and small tools. Made in the USA.

€28.63 €35.99

-€23.59

PRO-ONE PERF.MFG. Key Switch Bracket — Ignition switch, 6061-T6 aluminum, Chrome

Precision-machined bracket for secure key switch mounting; includes necessary mounting hardware.

€66.67 €90.26

Tether Kill Switch — 32 mm (1-1/4"), Black, Orange, Silver

-€36.11

PINGEL Tether Kill Switch — 32 mm (1-1/4"), Black, Orange, Silver

Clipped tether cord extends to 50"; optional adjustable wristband; water-resistant internal components; made in the USA.

€140.40 €176.51

-€23.59

PRO-ONE PERF.MFG. Ignition Switch Cover — Black, Polished Aluminum

Low-profile billet cover adheres over your stock switch knob with included double-sided adhesive for a quick upgrade.

€66.67 €90.26

-€23.59

PRO-ONE PERF.MFG. Ignition Switch Cover — Black, Polished

Quick-fit ignition switch cover with easy adhesive installation and billet-matching design.

€66.67 €90.26

Tether Kill Switch — 22 mm (7/8”), Aluminum, Black, Orange

-€33.71

PINGEL Tether Kill Switch — 22 mm (7/8”), Aluminum, Black, Orange

Reliable tether-operated kill switch with clipped 50" cord, optional adjustable wristband, billet aluminum body and water-resistant stainless steel internals. Made in the USA.

€131.13 €164.84

Tether Kill Switch — 25 mm (1") clamp, Black, Orange, Silver

-€35.14

PINGEL Tether Kill Switch — 25 mm (1") clamp, Black, Orange, Silver

Complete tether kill switch with a 50" clipped cord, optional adjustable wristband, and water-resistant internal components. Made in the USA.

€136.61 €171.75

Electrical & Ignition

Contact us

Products

Our company