Electrical & Ignition

Total Control Passing Lamp Harness — 12 V

-€7.26

KURYAKYN Total Control Passing Lamp Harness — 12 V

Keeps passing lamps lit with the high beam; required for Phase 6/Phase 7 LED setups. Plug-and-play installation.

€28.25 €35.51

Aluminum Load Equalizers — 12V, 100W, 6Ω, Black

-€3.27

KURYAKYN Aluminum Load Equalizers — 12V, 100W, 6Ω, Black

Converts incandescent turn signals to low-draw LED; 100W–6Ω rating; includes heat-shrink butt connectors; extruded housing with mounting holes for secure installation.

€12.74 €16.01

-€2.97

KURYAKYN Tracer Power Adaptor — for Harley-Davidson®

Provides correct power and optimization for Tracer lights with plug-and-play installation.

€11.52 €14.49

Spark Plug Head Bolt Cover — Chrome, Silver

-€18.21

KURYAKYN Spark Plug Head Bolt Cover — Chrome, Silver

Stepped and slotted design complements the engine; faceted edges reflect light. Easy to install for a clean, finished look.

€70.78 €88.99

-€18.21

KURYAKYN Spark Plug Head Bolt Cover — Black gloss, pair

Stepped and slotted spark plug head bolt cover that installs easily for a refined engine finish.

€70.78 €88.99

-€24.01

KURYAKYN Mach 2™ Horn Cover — Chrome, Black

Perfect complement to the Mach 2™ air cleaner; replaces the stock "cowbell" horn cover for a cleaner look.

€93.36 €117.37

-€2.32

FLOSSER Horns and Fanfares — 70 mm, 12V

Street-legal horns and fanfares with a galvanized finish. Easy to install and fit virtually all bikes.

€6.53 €8.85

-€2.32

FLOSSER Horns and Fanfares — 70 mm (2-3/4") disk horn, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit most motorcycles.

€6.53 €8.85

-€2.52

FLOSSER Horns and Fanfares — 91 mm, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit most bikes.

€7.10 €9.62

-€2.52

FLOSSER Horns and Fanfares — 91 mm, High Tone, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit virtually all bikes.

€7.10 €9.62

Horns and Fanfares — 91 mm (3-9/16"), 12V

-€4.55

FLOSSER Horns and Fanfares — 91 mm (3-9/16"), 12V

Street-legal horns and fanfares; easy to install and fit virtually all bikes, with a galvanized finish.

€13.32 €17.87

-€4.54

FLOSSER Horns and Fanfares — 12V

Street-legal horns and fanfares; easy to install and galvanized for a long-lasting finish.

€12.39 €16.93

-€9.77

FLOSSER Horns and Fanfares — 12V, Black

Street-legal horns and fanfares; easy to install; galvanized for a timeless finish.

€27.60 €37.37

-€11.93

FLOSSER Horns and Fanfares — 12V, Chrome

Street-legal horns and fanfares that are easy to install and galvanized for a lasting finish.

€33.69 €45.62

-€10.66

FLOSSER Horns and Fanfares — 12V, Black

Street-legal, galvanized horns and fanfares that fit virtually all bikes—easy to install and built for lasting performance.

€30.14 €40.80

-€21.60

KURYAKYN Starter Solenoid Cover — Chrome

Protects the starter solenoid and related wiring; direct-fit with stock starter end cover.

€83.99 €105.59

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

-€17.37

KURYAKYN Regulator Cover — Chrome

Two-piece stamped cover fits the stock regulator; open, vented design; decorative fasteners; room inside for lights.

€67.56 €84.93

-€9.44

THUNDERMAX Push-Button Converter — Handlebar switch, 1 A, black

Converts a momentary push-button signal to a latching output. Circuit-protected, no relays. Compact 2" x 0.6" x 0.5". Six-wire hookup; wiring diagram included. For 12 V systems, 1 A max.

€36.72 €46.16

-€3.81

KURYAKYN Prism+ Light Wiring Connector — Y-Cable, Short

Relay loop connector that returns the signal to the Bluetooth controller for reliable light operation.

€14.83 €18.64

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.