Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.
+34 636 847 491 (10:00 - 13:30)
Electrical & Ignition

Active filters
COMP CAMS
Fast Start Boost Relay — 12V
€27.89
Regular price
€37.74
LA CHOPPERS
Handlebar Extension Wiring Kit — 24" (61 cm), Black
Complete handlebar wiring extension kit with cut-to-length wires and pre-crimped terminals for faster installation.
€42.48
Regular price
€53.40
LA CHOPPERS
Handlebar Extension Wiring Kit — 51 cm (20\"), Black
Complete handlebar extension wiring kit that simplifies installations and includes OEM-matching wires and heat shrink.
€50.63
Regular price
€63.64
LA CHOPPERS
Handlebar Extension Wiring Kit — 24" (61 cm), Black
Complete kit with OEM-matched wires and heat shrink; cut-to-length for up to 20" Ape Hanger handlebars.
€102.05
Regular price
€128.29
HOGTUNES
Rear Speaker Connector — Amp connector, male
Plugs into the empty 35‑pin socket on 2006–2013 factory Harmon Kardon radios. Clearly labeled wires for easy installation. Does not enable fader; reflashing required at an H-D® dealer.
€32.68
Regular price
€44.25
LA CHOPPERS
Handlebar Extension Wiring Kit — 19-1/2" wire, Harley...
- Saves time by streamlining handlebar wiring jobs
- Includes wiring for electronic throttle control and materials to extend hand control wires
- Terminals crimped on one end; cut-to-length design fits up to 20" Ape Hanger handlebars
- Includes OEM color matching wires and heat shrink
€96.77
Regular price
€121.66
BARNETT
Electronic Throttle Control Extension — 20 cm (8\"),...
Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.
€50.78
Regular price
€63.84
BARNETT
Electronic Throttle Control Extension — 12" cable
- Allows easy handlebar height changes on electronic throttle models.
- OEM-type connectors for plug-and-play installation.
- Made in the USA.
€50.95
Regular price
€64.06
LA CHOPPERS
CAN Bus Wiring Harness Extension — 91 cm (36\"), handlebar, Black
Plug‑N‑Play wiring harnesses for quick, clean installations. Made in the USA.
€71.94
Regular price
€90.44
LA CHOPPERS
CAN Bus Wiring Harness Extension — 99 cm (39\"), Handlebar, Black
Plug-N-Play harness extension for CAN Bus handlebar wiring. Made in the USA.
€72.18
Regular price
€90.74
LA CHOPPERS
CAN Bus Wiring Harness Extension — 45" (114.5 cm), Handlebar
Plug-N-Play wiring harness to complete handlebar wiring jobs. Made in the USA.
€93.72
Regular price
€117.82
LA CHOPPERS
CAN Bus Wiring Harness Extension — 48" cable, Handlebar, Black
Plug-N-Play wiring harness extension to complete your handlebar wiring job. Made in the USA.
€78.33
Regular price
€98.47
DEI
Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black
Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).
€10.45
Regular price
€15.21
DEI
Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black
Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.
€64.01
Regular price
€93.11
DEI
Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black
Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.
€70.38
Regular price
€102.40
DEI
Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black
Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.
€93.38
Regular price
€135.85
DEI
Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')
Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.
€137.51
Regular price
€200.05
DEI
Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black
Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.
€44.38
Regular price
€64.59
DEI
Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black
Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.
€58.40
Regular price
€84.97
MUC-OFF
AirTag Holder — Black
Secure two-part polymer holder for Apple AirTag with Torx security screws and four silicone clamps for discreet mounting. AirTag not included.
€39.76
Regular price
€50.41
LA CHOPPERS
Handlebar Extension Wiring Kit — 61 cm (24") wire length, Black
Complete handlebar wiring extension kit with crimped terminals, OEM color-matched wires, and heat shrink. Cut-to-length design for faster installs.
€42.48
Regular price
€53.40
LA CHOPPERS
Handlebar Extension Wiring Kit — 61 cm (24") wire, Black
Complete kit to extend hand-control wiring up to 20" ape hangers; terminals pre-crimped, OEM color-matching wires and heat shrink. Made in the U.S.A.
€71.57
Regular price
€89.96
LA CHOPPERS
Throttle By Wire Extension Kit — 20" cable, Black
Wiring extension for electronic throttle control with OEM-match color-coded wires and factory-style connectors. Fits most handlebar heights up to 20" ape hangers. Made in the U.S.A.
€42.49
Regular price
€53.41
LA CHOPPERS
Throttle By Wire Extension Kit — 51 cm (20\"), Pin connector,...
Wiring extension kit for electronic throttle control with OEM-match, color-coded wires and factory-style connectors. Fits most handlebar heights. Made in the USA.
€42.49
Regular price
€53.41
LA CHOPPERS
Throttle By Wire Extension Kit — 44.5 cm (17-1/2"), pin...
Wiring extension for electronic throttle control with OEM-matching color-coded wires and factory-style connectors. Works with most handlebar heights up to 20". Made in the U.S.A.
€50.03
Regular price
€62.90
BARNETT
Electronic Throttle Control Extension — 12 in,...
Extension cable for easy handlebar-height changes on models with electronic throttle control. OEM-type connectors. Made in the USA.
€46.32
Regular price
€58.23
LA CHOPPERS
Heated Grip Wire Extension Kit — fits up to 20" bars
Extends heated grip wiring for bars up to 20"; includes all wires to extend both the Throttle-By-Wire and heated grip harnesses.
€23.02
Regular price
€28.95
LA CHOPPERS
Heated Grip Wire Extension Kit — Handlebar kit, LA-8998-01
Extends heated-grip and throttle-by-wire harnesses for bars up to 20"; includes all required extension wires.
€58.20
Regular price
€73.17
LA CHOPPERS
CAN Bus Wiring Harness Extension — 91 cm (36\"), Black,...
Plug-n-play CAN Bus wiring harness extension to finish handlebar wiring jobs. Made in the USA.
€125.35
Regular price
€157.58
LA CHOPPERS
CAN Bus Wiring Harness Extension — 99 cm (39"), Harley-Davidson®
Plug-and-play CAN Bus handlebar wiring extension for faster, more reliable installs. Made in the USA.
€125.35
Regular price
€157.58