Electrical & Ignition

-€2.87

CUSTOM DYNAMICS Push Button Switch — 3 pack, black

Single-pole push-button switch with waterproof boot for weather protection.

€10.09 €12.96

Auxiliary Handlebar Mounted On/Off Switch — 12 VDC, fits 7/8", 1", 1-1/4" handlebars, Black

-€10.05

CUSTOM DYNAMICS Auxiliary Handlebar Mounted On/Off Switch — 12 VDC, fits 7/8",...

Handlebar-mounted on/off switch for auxiliary lights. Includes three rubber insulators, hardware, and 18 AWG 60" wire leads. Fits 7/8", 1" and 1-1/4" handlebars.

€39.09 €49.14

Auxiliary Handlebar Control Mounted On/Off Switch — Black, fits Harley-Davidson®

-€8.04

CUSTOM DYNAMICS Auxiliary Handlebar Control Mounted On/Off Switch — Black,...

On/off handlebar switch for auxiliary driving or accessory lights. Direct OEM clamp-half replacement. 18 AWG 60" wire leads. Simple two-wire hookup with hardware included.

€31.27 €39.31

ProBEAST® Dual Tone Air Horn — Cover 5-7/8" x 5-3/4", Does not fit V-Rod, Black

-€80.81

CUSTOM DYNAMICS ProBEAST® Dual Tone Air Horn — Cover 5-7/8" x 5-3/4", Does not...

Direct replacement for Harley-Davidson® stock "cow bell" unit; 104.9 db rating; heavy duty bracket and ABS cover; plug-and-play harness included. Does not fit V-Rod.

€228.43 €309.24

Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

Superior connection compared to crimping. Wire ends lock between opposing cone shapes when hand tightened.

€9.86 €12.67

Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

Provides a superior alternative to crimping; locks wire ends between opposing cones when hand tightened for a secure mechanical connection.

€9.86 €12.67

-€2.19

CUSTOM DYNAMICS Wiring Cage Clamp — 3-pin, 20 A

Compact spring-clip connector for joining multiple wires; accepts up to five 24 AWG wires per port.

€6.70 €8.89

-€2.64

CUSTOM DYNAMICS Mini ATC Fuse Holder — 3 A, 5-pack, Black, Red

Waterproof-boot mini fuse kit with five holders and pre-installed 3 amp fuses.

€9.26 €11.90

-€4.85

CUSTOM DYNAMICS TruBEAM® Headlamp Adapter Harness — Fits H4

Required when replacing stock dual-halogen headlamps with an LED headlamp or any other H4-based headlamp. Provides plug-and-play connection.

€17.02 €21.87

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

On sale!
-€3.11

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€12.10 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

On sale!
-€19.06

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€74.05 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

On sale!
-€20.97

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€81.43 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

On sale!
-€27.82

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€108.03 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

On sale!
-€40.96

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€159.09 €200.05

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

On sale!
-€17.40

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€67.57 €84.97

-€6.71

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8 in), for Harley-Davidson®

Plug-and-play harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.08 €32.79

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — Harley-Davidson®

Direct plug-in adapter for rear fender swaps; connects to the OEM under-seat and rear lighting harnesses for plug-and-play installation.

€32.80 €41.24

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — for Harley-Davidson®

Plugs into the OEM harness under the seat and mates with the OEM rear lighting harness for plug-and-play swaps. No splicing required.

€32.80 €41.24

SMART Controller Brake Y-Harness — For Harley Davidson®, Black

-€6.82

CUSTOM DYNAMICS SMART Controller Brake Y-Harness — For Harley Davidson®, Black

Plug-and-play Y-harness that feeds brake signal to 3-wire (red non-sequential) lighting products for use with the Smart Turn Signal Controller and 1157 dual-color rear signals.

€26.55 €33.37

$Handlebar Extension Wire Kit — 20 cm (8\"), Harley-Davidson, Black$

-€7.77

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 20 cm (8\"), Harley-Davidson,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play handlebar extensions.

€30.19 €37.96

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 30.5 cm (12"), Black

Pre-cut lengths for easy extension of OEM throttle wires; color-matched Molex-terminated wiring; plug-and-play installation.

€27.74 €34.86

Handlebar Extension Wire Kit — 10.2 mm (4") , Harley-Davidson, Black

-€7.54

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 10.2 mm (4") , Harley-Davidson,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play handlebar extension installs.

€29.33 €36.87

$Throttle-By-Wire Extension Kit — 10.2 mm (4\"), Black$

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 10.2 mm (4\"), Black

Pre-cut, color-matched wires with Molex terminals for plug-and-play extension of throttle-by-wire harnesses.

€27.74 €34.86

-€4.11

CUSTOM DYNAMICS Shark Demon® Single Lamp Wire Harness — SD2-UNV-HARN

Wire harness that connects the Shark Demon® headlight to vehicle high beam, low beam, and ground.

€15.99 €20.10

Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

-€6.68

CUSTOM DYNAMICS Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

Plug-and-play harness for easy Tour Pak® removal and reconnection.

€25.95 €32.63

-€7.25

CUSTOM DYNAMICS Integrated Taillight Adapter — Harley Davidson®, TL-LRST-INT

Adapter for integrated LED taillights; provides running light, brake light and amber auxiliary turn signals. Plug-and-play installation.

€28.22 €35.47

Copper Plus™ Spark Plug — 14 mm thread, 9.5 mm reach (3/8"), heat range 12

-€3.24

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 9.5 mm reach (3/8"),...

Copper Plus™ spark plug with a copper-core center electrode and Ultraseal™ coating for improved ignition and corrosion resistance.

€2.91 €6.15

$Copper Plus™ Spark Plug — 12 mm thread, 19.1 mm reach (3/4\"), 16 mm hex (5/8\")$

-€1.08

CHAMPION Copper Plus™ Spark Plug — 12 mm thread, 19.1 mm reach (3/4\"),...

Copper Plus™ spark plug with copper-core electrode, patented SAC-9 resistor and Ultraseal™ coated shell. Made in the USA.

€3.05 €4.13

Electrical & Ignition

Contact us

Products

Our company