Electrical & Ignition

-€11.57

HOGTUNES Rear Speaker Connector — Amp connector, male

Plugs into the empty 35‑pin socket on 2006–2013 factory Harmon Kardon radios. Clearly labeled wires for easy installation. Does not enable fader; reflashing required at an H-D® dealer.

€32.68 €44.25

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

Cigarette Lighter Socket with Cable Harness — 12V 15A, 160 cm, black

-€3.43

SW-MOTECH Cigarette Lighter Socket with Cable Harness — 12V 15A, 160 cm,...

Sealed cigarette lighter outlet with a fully insulated cable harness and rubber seals. Self-install kit including outlet, harness, safety catch and mounting instructions. Mounting plate sold separately.

€13.38 €16.81

USB Double Charging Socket with Cable Harness — 12V, 2A, Black

-€6.01

SW-MOTECH USB Double Charging Socket with Cable Harness — 12V, 2A, Black

Dual USB charging socket with sealed, insulated cable harness for charging GPS units, cameras, smartphones and tablets. Includes double USB socket, cable harness and mounting instructions. Additional mounting plate required.

€23.40 €29.41

USB Double Charging Socket with Universal Plug — 12 V, 2.1 A, Black

-€6.01

SW-MOTECH USB Double Charging Socket with Universal Plug — 12 V, 2.1 A,...

Dual USB sockets for charging smartphones and accessories; universal plug fits cigarette lighter or vehicle outlet. Angled connector housing. Includes one unit.

€23.40 €29.41

Cigarette Lighter Socket Bracket M8 — Black, M8 screws 40/50 mm

-€3.10

SW-MOTECH Cigarette Lighter Socket Bracket M8 — Black, M8 screws 40/50 mm

Secure mount to attach a cigarette lighter outlet to a bar mount using an M8 screw. Quick installation, flexible alignment; mounting material included.

€12.03 €15.13

-€7.74

SW-MOTECH Universal Electric Kit — 12V 1A, Black

Universal cockpit power supply with cigarette lighter and USB outlets. Mounts to handlebar or fairing; includes mounting plates, screws and fuse.

€30.08 €37.82

-€1.22

PARTS UNLIMITED Spark Plug Caddy — 14 mm, Black

Holds two ignition units securely for organized, protected storage.

€3.44 €4.66

Flashing Spark Plug Cap — 10 mm, 12 mm, 14 mm, threaded stud, 90°, Blue

-€2.32

PARTS UNLIMITED Flashing Spark Plug Cap — 10 mm, 12 mm, 14 mm, threaded stud,...

Provides a visual spark indicator for quick ignition checks. Not for use on fuel-injected models.

€6.57 €8.89

-€2.32

PARTS UNLIMITED Flashing Spark Plug Cap — 10 mm, 12 mm, 14 mm, 90° connector, Red

Flashing cap for terminal nut-style plugs; accepts common plug wires; not for fuel-injected models.

€6.57 €8.89

-€2.32

PARTS UNLIMITED Flashing Spark Plug Cap — 10 mm, 12 mm, 14 mm, threaded stud, red

Provides a visual spark indication for quick diagnostics. Fits terminal nut style plugs. Not for fuel-injected models.

€6.57 €8.89

Flashing Spark Plug Cap — 10 mm, 12 mm, 14 mm plugs, threaded stud terminal

-€2.32

PARTS UNLIMITED Flashing Spark Plug Cap — 10 mm, 12 mm, 14 mm plugs, threaded...

Flashing cap for terminal-nut spark plugs; fits 10 mm, 12 mm and 14 mm plugs and accepts 7 mm or 8 mm wires. Not for fuel-injected models.

€6.57 €8.89

-€2.32

PARTS UNLIMITED Flashing Spark Plug Cap — 10mm, 12mm, 14mm, threaded stud, red

Flashing cap for terminal-nut spark plugs; fits 10 mm–14 mm and accepts 7 mm or 8 mm wires. Not for fuel-injected models.

€6.57 €8.89

Flashing Spark Plug Cap — 10 mm, 12 mm, 14 mm, Threaded stud, Blue

-€2.32

PARTS UNLIMITED Flashing Spark Plug Cap — 10 mm, 12 mm, 14 mm, Threaded stud,...

Fits 10 mm, 12 mm and 14 mm plugs with terminal nuts.
Accepts 7 mm or 8 mm plug wires.
For terminal nut style plugs; not for fuel-injected models.

€6.57 €8.89

-€7.25
Out of Stock

ALLOY ART Extended Handlebar Wiring Harness — 91 cm (36"), Black

Extended harness simplifies handlebar swaps. Color coded for OEM match. Measures 36". Made in the U.S.A.

€20.49 €27.74

Electronic Throttle Control Extension — 12 in, Throttle-by-Wire, Black

-€11.91
Out of Stock

BARNETT Electronic Throttle Control Extension — 12 in,...

Extension cable for easy handlebar-height changes on models with electronic throttle control. OEM-type connectors. Made in the USA.

€46.32 €58.23

-€10.18
Out of Stock

HOGTUNES Rear Speaker Plug — Harley Davidson®

Connects into an empty fairing socket to access radio rear outputs. Labeled wires; can power 2 ohm speakers. Factory radio reflash required to enable fader.

€28.77 €38.95

-€2.78
Out of Stock

PARTS UNLIMITED Starter Shaft Housing Bearing — BCE810

Needle bearing for starter housings; precision rollers reduce friction and ensure smooth crank operation.

€7.88 €10.66

Electrical & Ignition

Contact us

Products

Our company