Electrical & Ignition

-€17.76

ANDREWS Supervolt 12 V Ignition Coil — 12V, 30,000V, Black

Original Andrews replacement coil with classic styling and increased spark performance. Made in the U.S.A.

€69.08 €86.84

-€17.76

ANDREWS Supervolt 12 V Ignition Coil — 30,000V, Red

Classic-look replacement ignition coil that boosts spark output and improves throttle response. Made in the U.S.A.

€69.08 €86.84

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€2.18
Out of Stock

COLONY Magneto Ground Terminal Assembly — Magneto

Secure magneto ground terminal assembly for consistent engine grounding and reliable ignition performance.

€6.16 €8.34

-€7.25
Out of Stock

ALLOY ART Extended Handlebar Wiring Harness — 91 cm (36"), Black

Extended harness simplifies handlebar swaps. Color coded for OEM match. Measures 36". Made in the U.S.A.

€20.49 €27.74

Electronic Throttle Control Extension — 12 in, Throttle-by-Wire, Black

-€11.91
Out of Stock

BARNETT Electronic Throttle Control Extension — 12 in,...

Extension cable for easy handlebar-height changes on models with electronic throttle control. OEM-type connectors. Made in the USA.

€46.32 €58.23

Circuit Breaker to Coil Wire Assembly — Black

-€6.42
Out of Stock

COLONY Circuit Breaker to Coil Wire Assembly — Black

Reproduction wire assembly with cloth sheathing. Made in the U.S.A.

€18.16 €24.58

-€13.01
Out of Stock

COLONY Terminal Box Assembly — Black, Threaded

Preassembled unit with included mounting hardware for quick, reliable installation.

€50.61 €63.62

-€6.08
Out of Stock

COLONY Terminal Plate — Threaded connector, Black

Preassembled with painted finish; includes all mounting hardware.

€23.66 €29.74

-€46.28
Out of Stock

CUSTOM CYCLE ENGINEERING Solenoid End Cover with Starter Button — Black, SHS9900-3

Replacement solenoid end cover with integrated starter button; includes mounting screws. Fits most 1991–2016 starter motors (excludes Compu-Fire and 2.0/2.4 Terry). Made in the USA. Verify exhaust clearance on some models.

€130.82 €177.10

-€57.69
Out of Stock

CUSTOM CYCLE ENGINEERING Solenoid End Cover with Starter Button — Solenoid, Starter,...

Direct-fit replacement solenoid end cover with starter button. Includes mounting screws. Fits most '91–'16 starter motors; some exceptions apply.

€163.07 €220.76

Electrical & Ignition

Contact us

Products

Our company