Electrical & Ignition

-€31.18

NAMZ Momentary Switch Converter — High/Low

Converts momentary headlight and run switches into latched high/low and on/off functions. Made in the USA.

€93.56 €124.74

-€76.55

NAMZ CAN Bus Controller — 12 V, CAN Bus, Hard Wire

Enables custom handlebar switches; plugs into the factory harness under the fuel tank. Does not work with keyless ignition.

€229.65 €306.20

-€76.55

NAMZ CAN Bus Controller — 12V, CAN Bus connector

Allows for custom handlebar switch controls; plugs into the factory harness under the fuel tank; hard-wire integration; does not work with keyless ignition; made in the USA.

€229.65 €306.20

-€11.49

NAMZ Fuel Light Resistor Pack — Fuel light, Black

Replacement resistor pack that restores fuel warning light operation for compatible Dakota Digital gauges. Made in the USA.

€34.45 €45.94

-€36.21

NAMZ Trailer Isolator Module — Harley Davidson®, Black/Red

Protects factory turn signal module when adding a trailer; plug-and-play inline unit with fuse and holder included.

€108.64 €144.85

2000I PC Programmable Electronic Ignition Kit — Dyna 2000 Series, Dual

-€100.88
Out of Stock

DYNATEK-HARLEY 2000I PC Programmable Electronic Ignition Kit — Dyna 2000...

Self-contained unit fits under the cam cover for a clean look.
Single-fire operation to zero rpm; supports single or dual-fire setups.
Ten advance curves, adjustable rev limit and retard for forced induction.
VOES indicator, built-in tach driver, and extensive data logging.
PC-programmable; programming kit required for downloads and full programming.

€392.31 €493.19

2000I PC Programmable Electronic Ignition Kit — Dyna 2000 Series, Twin

-€98.42

DYNATEK-HARLEY 2000I PC Programmable Electronic Ignition Kit — Dyna 2000...

Self-contained ignition module fits under the cam cover. Single- or dual-fire operation, ten advance curves, PC-programmable. Not for fuel-injected models. Made in the USA.

€382.74 €481.16

2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000 Series, 7-pin connector, black

-€52.64

DYNATEK-HARLEY 2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000...

PC-programmable plug-in ignition upgrade with four advance curves, selectable rev limits, diagnostic LED and separate tach output.

€204.72 €257.36

2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000 Series, 7-pin, Black

-€52.64

DYNATEK-HARLEY 2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000...

Plug-in PC-programmable digital ignition for late-model Harleys. Four advance curves, four rev limiter settings (6000–7500 rpm), separate tach output, and diagnostic LED. Not for fuel-injected models.

€204.72 €257.36

-€53.96

DYNATEK-HARLEY 2000-HDE PC-Programmable Digital Ignition Module — Black, 8 Pin

PC-programmable digital ignition module that replaces late-model electronic advance systems. Allows custom advance curves, adjustable rev limits (6000–7500 rpm), separate tach output, and includes a diagnostic LED. Not for fuel-injected models.

€209.83 €263.79

-€65.16

DYNATEK-HARLEY REV Limiter — Harley-Davidson®, Black

Two independent adjustable rev limiters (launch and high-side)
Launch: 2500–6250 RPM; high-side: 5500–9250 RPM
Holds launch within ±50 RPM
Direct plug-in connection at the coil

€253.40 €318.56

-€39.89

DYNATEK-HARLEY Miniature Series Coil — 12V

Compact, high-output ignition coil for Dyna 2000/3000 and dwell-controlled ignitions. Not for Twin Cam or older Dyna generations.

€155.10 €194.99

-€25.18

DYNATEK-HARLEY Miniature Series Coil — 12V, 3.0Ω, Dual-Plug, Black

Compact, high-output coil for customs and concealed installation. Works with Dyna 2000 and 3000 series and with aftermarket dwell-control ignitions. Secondary resistance 11.5 ohms. Not for Twin Cam, Dyna "S", DYNA III or earlier.

€97.90 €123.08

-€39.89

DYNATEK-HARLEY Dual-Output Coil — 12V, Black

Reliable dual-output ignition coil for aftermarket and OEM applications. Made in the USA.

€155.10 €194.99

-€7.36

PINGEL Tether Cord with Wristband — Black

Secure tether cord with adjustable wristband for keys and small tools. Made in the USA.

€28.63 €35.99

Tether Kill Switch — 32 mm (1-1/4"), Black, Orange, Silver

-€36.11

PINGEL Tether Kill Switch — 32 mm (1-1/4"), Black, Orange, Silver

Clipped tether cord extends to 50"; optional adjustable wristband; water-resistant internal components; made in the USA.

€140.40 €176.51

-€23.34

NAMZ Ignition Switch — Silver

Durable keyed switch with knurled jam-nut; includes two keys and mounting screws.

€70.00 €93.34

-€121.30

TERRY COMPONENTS Starter Motor — 12V, Chrome

Durable Nippondenso construction with precision components and dyno-tested reliability.
Upgraded solenoid and clutch components for extended service life.

€471.75 €593.05

-€34.91

TERRY COMPONENTS Solenoid End Cover with Starter Button — 1.4 kW, Chrome

Replacement solenoid end cover with integrated starter button. Installs in minutes with OEM hardware. Made in the USA.

€135.74 €170.65

-€111.44

TERRY COMPONENTS Starter Motor — 12V, 1.2 kW, Chrome

Nippondenso starter assembled in the U.S.A.; heavy-duty components, precision clutch parts, and dyno-tested for reliable performance.

€433.38 €544.82

-€36.14
Out of Stock

TERRY COMPONENTS Solenoid End Cover with Starter Button — 1.8 kW, Chrome

Replaces the original end cover and installs in minutes with factory hardware.

€140.58 €176.72

-€36.14

TERRY COMPONENTS Solenoid End Cover with Starter Button — Black, 1.8 kW

Replaces the OEM end cover and serves as a primary or auxiliary starter button. Installs in minutes with OEM hardware. Made in the USA.

€140.58 €176.72

-€36.14

TERRY COMPONENTS Solenoid End Cover with Starter Button — Chrome

Quick bolt-on solenoid end cover with starter button that replaces the OEM end cover and installs with OEM hardware.

€140.58 €176.72

-€36.14

TERRY COMPONENTS Solenoid End Cover with Starter Button — Black, Billet...

Replaces the OEM end cover; serves as primary or auxiliary starter button; installs in minutes with OEM hardware; made in the USA.

€140.58 €176.72

-€39.43

TERRY COMPONENTS Loaded Starter Solenoid Body — 12 V, Chrome

Complete loaded solenoid body with preinstalled contacts, plunger, cover and switch terminal; fits 1.2, 1.4, 1.6 and 1.8 kW high-torque aftermarket starter motors.