Electrical & Ignition

-€11.71

PAUGHCO Distributor Hold Down — Chrome

Single-bolt distributor clamp compatible with most aftermarket distributors. Made in the USA.

€17.32 €29.03

Auto-Canceling Turn Signal Module — 2-7/8" L x 1-3/8" W x 7/8" D, 12V, 6 pins, Black

-€26.12

BADLANDS Auto-Canceling Turn Signal Module — 2-7/8" L x 1-3/8" W x 7/8"...

Plug-in auto-canceling turn signal module with LED load equalizer and emergency flasher. Verify your bike’s connector before purchase.

€60.95 €87.07

-€14.58

BADLANDS Turn Signal Load Equalizer™ III — 12V, hard-wire, waterproof

Solid-state waterproof load equalizer designed to eliminate erratic turn-signal blinking and to work with OEM alarm or turn-signal modules (TSSM/TSM). Compatible with most halogen and LED custom signals. Made in the USA.

€56.68 €71.26

-€28.93

BADLANDS Run, Brake and Turn Signal Module — 12V, Black

Converts stock or custom signals to running and brake lights while retaining turn function; built-in load equalizer; plug-in connectors; made in the USA.

€112.50 €141.43

Run, Brake and Turn Signal Module — 12V, 6-pin OEM-style connector

-€28.93

BADLANDS Run, Brake and Turn Signal Module — 12V, 6-pin OEM-style...

Converts stock or custom turn signals into running and brake lights while preserving turn-signal operation; built-in load equalizer and plug-in connectors for easy installation on select models.

€112.50 €141.43

-€28.93

BADLANDS Illuminator Pro III Harley — 12V, 10A, Hard Wire

Compact control module for run, brake and turn lights. Compatible with LED, halogen and incandescent bulbs.

€112.50 €141.43

-€17.12

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Solid-state waterproof plug-in equalizer that stops erratic blinking and works with most custom halogen and LED signals; one module per pair.

€66.58 €83.70

-€17.12

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM Style

Solid-state, waterproof plug-in equalizer that eliminates erratic blinking and works with OEM alarm systems (TSSM) and turn signal modules (TSM). One module per pair.

€66.58 €83.70

-€20.60

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Plug-and-play sealed load equalizer that stops erratic blink rates; one module required per pair of signals.

€80.09 €100.69

Run, Brake and Turn Signal Module — 12V, 8-pin OEM connector, Black

-€24.98

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin OEM connector,...

Turns stock or custom turn signals into running and brake lights while preserving turn signal function. Built-in load equalizer, plug-in installation, made in the USA.

€97.11 €122.09

Auto-Canceling Turn Signal Module — 12V, 8-pin Deutsch connector, Black

-€22.55

BADLANDS Auto-Canceling Turn Signal Module — 12V, 8-pin Deutsch...

Plug-and-play auto-canceling turn signal module with built-in emergency flasher and load equalizer; fits many 1994–2000 models. Made in the USA.

€87.69 €110.24

-€29.53

BADLANDS Run, Brake and Turn Signal Module — 12V, 8 pins, OEM style

Adds running and brake lights to stock or custom turn signals while preserving turn signal function. Plug-in connectors and simple instructions for select models. Made in the USA.

€114.89 €144.42

-€14.52

BADLANDS Hard-Wire CAN Bus Load Equalizer — 12V

Stops erratic front turn-signal blinking. Compatible with halogen and LED front signals, solid-state waterproof module, parade-safe with no heat, works with OEM alarm/turn-signal modules, made in the USA.

€56.47 €70.99

Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM-style connector

-€17.06

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM-style...

Solid-state, waterproof plug-in module that eliminates erratic blinking on self-canceling turn signals. One module required per signal pair.

€66.33 €83.39

-€32.48

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Eliminates erratic blinking; plug‑in module for use with OEM alarm/TSM; solid-state sealed design; one module per signal pair.

€67.82 €100.30

-€20.52

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM Style

Solid-state waterproof module that eliminates erratic blinking for custom and OEM turn signals. One module per pair.

€79.78 €100.30

-€20.52

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Plugs into OEM wiring to eliminate hyperflash and erratic turn-signal blinking; waterproof solid-state module. One module per pair.

€79.78 €100.30

-€31.59

BADLANDS Brake Light Eliminator — Black, Blue

Separates running and brake lights from flashing turn signals; includes rear fender harness to replace stock wiring.

€122.84 €154.43

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€38.16

TEXA Interface Cable — Black

Reliable interface cable for connecting diagnostic tools to vehicle systems. Flexible jacket and reinforced strain relief for long service life.

€107.95 €146.11

-€44.58

TEXA Interface Cable — Black

Durable interface lead with flexible jacket and precision connectors for reliable diagnostic connections.

€126.14 €170.72

-€36.95

TEXA Interface Cable — TEXA, Black, P/N 3911585

Reliable shielded interface cable for diagnostic connections with a secure locking connector.

€104.55 €141.50

-€13.65

TEXA Interface Cable — Black

Durable, shielded interface cable for reliable diagnostic connections.

€38.64 €52.29

Electrical & Ignition

Contact us

Products

Our company