Electrical & Ignition (4)

ProGLOW™ Wiring — 178 mm (7") wire length, 3-way splitter, Black

-€3.85

CUSTOM DYNAMICS ProGLOW™ Wiring — 178 mm (7") wire length, 3-way splitter, Black

Watertight plug-and-play connectors for easy installation with ProGlow accent lighting; helps achieve ideal lengths for flawless placement.

€14.95 €18.80

-€1.42

CUSTOM DYNAMICS ProGLOW™ End Caps — Black, 7-pack

Seven-piece set with three loop caps to terminate wiring channels and four dummy caps for waterproofing; compatible with most low-profile LED strips (sold separately).

€5.51 €6.93

TriBar Eliminator Harness — 20 cm (8") wire, fits Harley-Davidson®

-€6.88
Out of Stock

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8") wire, fits...

Plug-and-play pass-through harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.73 €33.61

$Throttle-By-Wire Extension Kit — 38 cm (15\"), Black$

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 38 cm (15\"), Black

Pre-cut, color-matched, plug-and-play wiring to extend OEM throttle connections with Molex terminals.

€27.74 €34.86

$Throttle-By-Wire Extension Kit — 20 cm (8\"), Harley-Davidson®, Black$

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 20 cm (8\"),...

Pre-cut lengths to extend OEM wires for extended handlebars; Molex terminals on both ends; plug-and-play.

€27.74 €34.86

Handlebar Extension Wire Kit — 38 cm (15") , Black, Harley-Davidson®

-€11.37

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 38 cm (15") , Black,...

Pre-cut lengths for easy OEM wire extension when fitting extended handlebars. Color-matched with Molex terminals. Plug-and-play.

€44.22 €55.59

Handlebar Extension Wire Kit — 30.5 cm (12"), Black, Harley-Davidson®

-€9.09

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 30.5 cm (12"), Black,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play extension of OEM handlebar wiring.

€35.38 €44.47

-€9.54

CUSTOM DYNAMICS Light Bar Harness — for Harley-Davidson

Compact plug-and-play harness that supplies direct battery power with built-in protections.

Terminal connectors for direct battery hookup
On/off switch
Short circuit and terminal overload protection
No draw from run/aux circuits

€37.10 €46.64

Front Turn Signal Extension Harness — 4" (10.2 mm), JAE connector, for Harley-Davidson®

-€4.77
Out of Stock

CUSTOM DYNAMICS Front Turn Signal Extension Harness — 4" (10.2 mm), JAE...

Extends OEM front turn signal wiring for easy relocation. Plug-and-play inline harness for left and right connections. Color-matched wires for straightforward installation.

€18.57 €23.34

Front Turn Signal Extension Harness — 20 cm (8"), JAE connector, Harley-Davidson

-€4.77

CUSTOM DYNAMICS Front Turn Signal Extension Harness — 20 cm (8"), JAE...

Allows relocation of OEM front turn signal housings by extending the factory wiring for clean, plug-and-play installs.

€18.57 €23.34

Front Turn Signal Extension Harness — 30.5 cm (12") wire, pair, Black

-€4.77

CUSTOM DYNAMICS Front Turn Signal Extension Harness — 30.5 cm (12") wire,...

Plug-and-play extension harness lets you relocate front OEM turn signal housings when upgrading handlebars; installs in-line for left and right connections.

€18.57 €23.34

Front Turn Signal Extension Harness — 15" (38 cm), Pair, JAE connector, Black

-€4.77

CUSTOM DYNAMICS Front Turn Signal Extension Harness — 15" (38 cm), Pair, JAE...

Extends factory front turn signal wiring to allow relocation when upgrading handlebars. Plug-and-play inline harness with color-matched wires for easy installation.

€18.57 €23.34

Wire Harness — fits 2014–2023 Harley Davidson Touring (2013 or earlier CVO rear fender conversion)

-€11.47

CUSTOM DYNAMICS Wire Harness — fits 2014–2023 Harley Davidson Touring (2013 or...

Provides a plug-and-play connection for Custom Dynamics ProBEAM CVO Taillights on Harley Davidson Touring conversions.

€44.59 €56.06

-€10.19

CUSTOM DYNAMICS Rear Fender Adapter — Black, 6 Pins, Molex, for Harley-Davidson®

Plugs into the OEM harness under the seat to speed installation of rear fender or custom lighting components.

€39.61 €49.80

-€5.54

CUSTOM DYNAMICS Run/Turn Signal Adapter — JAE connector, Fits Harley-Davidson®

Provides run and turn power access with left/right pigtails for plug-and-play lighting installations.

€21.56 €27.10

Run/Turn Signal Adapter — For Harley‑Davidson®, JAE connector, MPR-ST-FTS

-€5.54

CUSTOM DYNAMICS Run/Turn Signal Adapter — For Harley‑Davidson®, JAE connector,...

Connects to OEM wiring for run power, turn signal power, and ground; pigtails for left and right side connections; simple plug-in installation.

€21.56 €27.10

-€7.68

CUSTOM DYNAMICS Run/Turn Signal Adapter — JAE connector, fits Harley Davidson®

Wires into the OEM harness to provide run, turn, and ground connections. Includes pigtails for left and right side; supports plug-and-play lighting (sold separately).

€29.88 €37.56

Shark Demon® Dual Lamp Wiring Harness — Y-splitter, Black, Harley-Davidson®

-€4.55

CUSTOM DYNAMICS Shark Demon® Dual Lamp Wiring Harness — Y-splitter, Black,...

Adapter y-harness mates to a pair of Shark Demon® LED headlights and enables plug-and-play installation to the OEM FLTR headlight connector.

€17.68 €22.23

Throttle-By-Wire Extension Harness — 122 cm (4') cable, for Harley-Davidson

-€6.82
Out of Stock

CUSTOM DYNAMICS Throttle-By-Wire Extension Harness — 122 cm (4') cable, for...

Provides extra length for taller handlebars. JST connectors route through most bars to avoid splicing. Plug-and-play installation.

€26.56 €33.38

Throttle-By-Wire Extension Harness — 20 cm (8"), 24 AWG, Harley-Davidson®

-€6.82

CUSTOM DYNAMICS Throttle-By-Wire Extension Harness — 20 cm (8"), 24 AWG,...

Extension harness for throttle-by-wire systems with JST connectors for plug-and-play installation, eliminates splicing.

€26.56 €33.38

Speedometer and Instrument Extension Harness — 91 cm (36″), Harley Davidson®

-€6.82

CUSTOM DYNAMICS Speedometer and Instrument Extension Harness — 91 cm (36″),...

Adds 36″ for taller handlebars

JST connectors route cleanly through most handlebars

Plug-and-play installation

€26.56 €33.38

-€7.18

CUSTOM DYNAMICS Accessory Harness — Splitter, for Harley-Davidson®

Splitter harness adds two accessory connections for easy plug-and-play installation.

€27.92 €35.10

Tour Pak® Quick Disconnect Harness — Harley Davidson®

-€6.18

CUSTOM DYNAMICS Tour Pak® Quick Disconnect Harness — Harley Davidson®

Plug-and-play connector for simple attachment and removal of the Tour Pak®.

€24.02 €30.20

-€9.92

CUSTOM DYNAMICS Integrated Taillight Harness — Harley Davidson® fit, black

Provides turn signal power to rear taillight assembly. Plug-and-play installation.

€38.64 €48.56

-€5.68

CUSTOM DYNAMICS 4-Wire Weather-Tight Quick Disconnects — 4 pins, 22 AWG, Black

Weather-tight quick disconnects for auxiliary lighting; installs inline for easy removal of saddlebags and other components.

€22.14 €27.82

-€2.03

CUSTOM DYNAMICS Run/Brake Taillight Adapter — For Harley-Davidson

Plug-and-play adapter for run and brake LED taillights. Compatible with Custom Dynamics and ProBEAM models (sold separately). Not compatible with integrated turn-signal taillights.