Electrical & Ignition (4)

-€7.25

CUSTOM DYNAMICS Integrated Taillight Adapter — Harley Davidson®, TL-LRST-INT

Adapter for integrated LED taillights; provides running light, brake light and amber auxiliary turn signals. Plug-and-play installation.

€28.22 €35.47

-€28.93

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin connector, Black

Converts stock and custom signals into running and brake lights while maintaining turn signal function. Built-in load equalizer and plug-in connectors for easy installation.

€112.50 €141.43

Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x 7/8", Deutsch 8-pin

-€22.55

BADLANDS Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x...

Direct plug-in replacement; self-cancels after 11 seconds, manual cancel available. Built-in emergency flasher and LED load equalizer up to 100 W per side. Verify your bike's connector before purchase.

€87.69 €110.24

-€9.25

BADLANDS Turn Signal Load Equalizer™ II — 12 V

Restores correct amperage when aftermarket marker lights replace stock turn signals. Maintains emergency flasher function. Made in the USA. Not for parade use or extended idling.

€35.98 €45.23

-€38.92

DYNATEK 12 V Ignition Coil — Black

Industry-standard 12 V coil with 35,000 V spark energy; fits Dyna systems. Not for Twin Cam applications.

€151.34 €190.26

-€38.92

DYNATEK 12 V Ignition Coil — Green, pair

Industry-standard ignition coil with 35,000 V spark energy, compatible with Dyna ignition systems. Not for Twin Cam applications.

€151.34 €190.26

-€38.92

DYNATEK 12 V Ignition Coil — 35,000 V, Green

Industry-standard high-energy spark; fits Dyna ignition systems; made in the USA; not for Twin Cam applications.

€151.34 €190.26

-€22.89

DYNATEK-HARLEY Dual Output HD Coil 3 Ohm — 12V, 3.0 ohm, Green

Industry-standard dual-output coil for Dyna ignition systems. Not for Twin Cam applications. Made in the U.S.A.

€89.00 €111.89

-€36.28

DYNATEK-HARLEY Twin Fire II Miniature 3 Ohm Coil — 3.0 ohm, 12V, Black

Compact, sealed ignition coil offering high-voltage output and peak gap current over 50 mA. Made in the U.S.A.

€141.13 €177.41

-€24.30

BADLANDS Run, Brake and Turn Signal Module — 12V, Black

Converts turn signals into running and brake lights while keeping turn signal function; built-in load equalizer and easy instructions for straightforward installation.

€94.49 €118.79

-€7.63

BADLANDS Turn Signal Load Equalizer™ — 12 V

Restores amperage draw for aftermarket marker lights so self-canceling systems function properly. Made in the USA.

€29.67 €37.30

Electronic Ignition System — Black, dual fire

-€27.46

DYNATEK-HARLEY Electronic Ignition System — Black, dual fire

Self-contained ignition system with Hall Effect sensors. Improves timing less than three degrees, extends plug life, and eliminates points and condensers. Easy to install; requires a 5 ohm aftermarket coil for use with Dyna S and is not recommended with OEM coils.

€106.82 €134.28

-€68.67

DYNATEK-HARLEY Ignition and Coil Kit — Black

Complete ignition and coil kit used by top racers; coils produce over 30,000 V. Housed Dyna S maintains factory advance curve. Not for fuel-injected models.

€267.02 €335.69

-€5.72

DYNATEK Universal 8 mm Suppression Plug Wire Kit — 48"

High-grade suppression core wires; two cut-to-length leads for up to four cylinders. Made in the U.S.A. Not for Twin Cam or '04-'15 XL.

€22.25 €27.97

-€11.64

CUSTOM DYNAMICS Ultra Tour-Pak® Run, Brake and Turn Signal Module — 12V

Plug-and-play conversion for Tour-Pak® lights to provide running, brake and turn functions. Works with LEDs only.

€35.05 €46.69

-€20.86

CUSTOM DYNAMICS Electromagnetic Dual Horn Kit — Black

Replaces factory horn with dual 109 dB low and high tone electromagnetic horns. Includes mounting bracket, wire harness and relay. Plug-and-play. IP65 rated.

€81.11 €101.97

-€67.89

CUSTOM DYNAMICS Turn Signal Module — Harley-Davidson

Direct OEM TSM/TSSM/HFSM plug-and-play replacement for Harley-Davidson models. Supports LED and incandescent bulbs (0.24–6 A per side). Manual and self-canceling operation, four-way hazards, automatic shutoff at >45° tilt, 11 VDC–15 VDC, built-in short and overcurrent protection.

€264.56 €332.45

-€67.89

CUSTOM DYNAMICS Turn Signal Module — Harley-Davidson®, 11 V–15 V

Direct OEM TSM/TSSM/HFSM plug-and-play replacement; compatible with LED or incandescent bulbs (0.24 A–6 A per side).

€264.56 €332.45

-€67.89

CUSTOM DYNAMICS Turn Signal Module — Harley Davidson®, TSM-4

Direct OEM plug-and-play replacement; compatible with LED or incandescent bulbs (0.24 A–6 A per side), low current draw, 11 V–15 V.

€264.56 €332.45

-€6.84

CUSTOM DYNAMICS Running Light Load Harness — Fits '25 Softail models, Black

Replicates the OE headlight halo running light load for '25 Softail models to prevent BCM codes and retain factory lighting.

€19.25 €26.09

-€1.22
Out of Stock

CUSTOM DYNAMICS Dual Signal Converter for Plasma Rods — 31 cm (12"), Black

Converts two-wire to three-wire for running-brake applications; easy inline installation and reliable performance.

€4.28 €5.50

Plug-In Illuminator with Red Lenses — 12V, Red lenses, Harley Davidson®

-€29.18
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, Red lenses, Harley...

Greatly increases rear visibility with three running/brake lights while preserving turn signal function; fits rear OEM turn signal assemblies and plugs into the OEM wiring harness for quick installation.

€113.50 €142.68

Plug-In Illuminator with Red Lenses — Red lenses, 12V, Harley Davidson® fit

-€29.18
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — Red lenses, 12V, Harley...

Plug-in upgrade that adds three running/brake lights while retaining turn signal function; fits rear OEM turn signal assemblies and connects to the OEM wiring harness.

€113.50 €142.68

-€29.18
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, Harley Davidson®

Three running/brake lights, fits rear OEM turn signal assemblies, plug‑in installation.

€113.50 €142.68

-€27.39
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, for Harley Davidson®

Three running/brake lights while retaining turn signal function; lenses fit rear OEM turn signal assemblies; plugs into OEM wiring harness for quick installation.

€106.52 €133.91

Plug-In Illuminator with Red Lenses — 12V, 8-pin connector, fits Harley-Davidson®

-€28.95
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, 8-pin connector,...

Three running/brake lights that maintain turn signal function; fits rear OEM turn signal assemblies for quick plug-in installation.

€112.59 €141.54

Plug-In Illuminator with Red Lenses — 12V, Harley Davidson, OEM-style 6-pin

-€28.95
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, Harley Davidson,...

Plug-In Illuminator with Red Lenses adds three running/brake lights, fits rear turn signal assemblies, and plugs into the factory wiring harness for quick installation.

€112.59 €141.54

-€27.39
Out of Stock

BADLANDS Run, Brake and Turn Signal Module — 12V, 12-pin connector

Converts stock or custom turn signals into running lights and brake lights while preserving turn signal function. Includes built-in load equalizer and plug-in connectors.

€106.52 €133.91

-€16.71
Out of Stock

CUSTOM DYNAMICS Ultra Tour-Pak® Run, Brake and Turn Signal Module — 12 V

Plug-and-play module that converts Tour-Pak® lights to running, brake and turn signals. Works with LEDs only; increases rear and side visibility.

€47.15 €63.86

-€10.91
Out of Stock

CUSTOM DYNAMICS Wiring Adapter — 6-pin, for Harley-Davidson

Easy-to-install adapter for connecting run, brake, turn and ground wires.

€30.86 €41.77

Contact us

Products

Our company