Electrical & Ignition (3)

Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

Provides a superior alternative to crimping; locks wire ends between opposing cones when hand tightened for a secure mechanical connection.

€9.86 €12.67

-€2.19

CUSTOM DYNAMICS Wiring Cage Clamp — 3-pin, 20 A

Compact spring-clip connector for joining multiple wires; accepts up to five 24 AWG wires per port.

€6.70 €8.89

-€2.64

CUSTOM DYNAMICS Mini ATC Fuse Holder — 3 A, 5-pack, Black, Red

Waterproof-boot mini fuse kit with five holders and pre-installed 3 amp fuses.

€9.26 €11.90

-€4.85

CUSTOM DYNAMICS TruBEAM® Headlamp Adapter Harness — Fits H4

Required when replacing stock dual-halogen headlamps with an LED headlamp or any other H4-based headlamp. Provides plug-and-play connection.

€17.02 €21.87

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€6.71

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8 in), for Harley-Davidson®

Plug-and-play harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.08 €32.79

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — For Harley-Davidson®

Plugs into the OEM harness under the seat.

Mates into the OEM rear lighting harness.

Enables plug-and-play rear fender swaps without wiring changes.

€32.80 €41.24

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — For Harley-Davidson®

Plugs into the OEM harness under the seat and mates to the OEM rear lighting harness for fast plug-and-play rear fender swaps.

€32.80 €41.24

SMART Controller Brake Y-Harness — Black, fits Harley-Davidson®

-€6.82

CUSTOM DYNAMICS SMART Controller Brake Y-Harness — Black, fits Harley-Davidson®

Routes brake signal to 3-wire lighting products so a Magic Strobes™ Brake Light Flasher can provide flash/strobe patterns; works with SMART Turn Signal Controller and Dual Color 1157 rear signals. Plug and play.

€26.55 €33.37

$Handlebar Extension Wire Kit — 20 cm (8\"), Harley-Davidson, Black$

-€7.77

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 20 cm (8\"), Harley-Davidson,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play handlebar extensions.

€30.19 €37.96

Throttle-By-Wire Extension Kit — 12" (30.5 cm) wire length, Black, fits Harley-Davidson®

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 12" (30.5 cm) wire length,...

Pre-cut, plug-and-play wiring to extend OEM throttle-by-wire harnesses; color-matched with Molex terminals.

€27.74 €34.86

Handlebar Extension Wire Kit — 10.2 mm (4") , Harley-Davidson, Black

-€7.54

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 10.2 mm (4") , Harley-Davidson,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play handlebar extension installs.

€29.33 €36.87

$Throttle-By-Wire Extension Kit — 10.2 mm (4\"), Black$

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 10.2 mm (4\"), Black

Pre-cut, color-matched wires with Molex terminals for plug-and-play extension of throttle-by-wire harnesses.

€27.74 €34.86

-€4.11

CUSTOM DYNAMICS Shark Demon® Single Lamp Wire Harness — SD2-UNV-HARN

Wire harness that connects the Shark Demon® headlight to vehicle high beam, low beam, and ground.

€15.99 €20.10

Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

-€6.68

CUSTOM DYNAMICS Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

Plug-and-play harness for easy Tour Pak® removal and reconnection.

€25.95 €32.63

-€7.25

CUSTOM DYNAMICS Integrated Taillight Adapter — Harley Davidson®, TL-LRST-INT

Adapter for integrated LED taillights; provides running light, brake light and amber auxiliary turn signals. Plug-and-play installation.

€28.22 €35.47

-€38.92

DYNATEK 12 V Ignition Coil — Black

Industry-standard 12 V coil with 35,000 V spark energy; fits Dyna systems. Not for Twin Cam applications.

€151.34 €190.26

-€38.92

DYNATEK 12 V Ignition Coil — 35,000 V, Green

Industry-standard high-energy spark; fits Dyna ignition systems; made in the USA; not for Twin Cam applications.

€151.34 €190.26

-€22.89

DYNATEK-HARLEY Dual Output HD Coil 3 Ohm — 12V, 3.0 ohm, Green

Industry-standard dual-output coil for Dyna ignition systems. Not for Twin Cam applications. Made in the U.S.A.

€89.00 €111.89

-€5.55

EASTERN MOTORCYCLE PARTS Starter Brush — A-31575-73

Replacement starter brushes that restore starter performance.

€15.67 €21.22

-€68.67

DYNATEK-HARLEY Ignition and Coil Kit — Black

Complete ignition and coil kit used by top racers; coils produce over 30,000 V. Housed Dyna S maintains factory advance curve. Not for fuel-injected models.

€267.02 €335.69

-€5.72

DYNATEK Universal 8 mm Suppression Plug Wire Kit — 48"

High-grade suppression core wires; two cut-to-length leads for up to four cylinders. Made in the U.S.A. Not for Twin Cam or '04-'15 XL.

€22.25 €27.97

-€20.86

CUSTOM DYNAMICS Electromagnetic Dual Horn Kit — Black

Replaces factory horn with dual 109 dB low and high tone electromagnetic horns. Includes mounting bracket, wire harness and relay. Plug-and-play. IP65 rated.

€81.11 €101.97

-€67.89

CUSTOM DYNAMICS Turn Signal Module — CUSTOM DYNAMICS, TSM-1, Harley-Davidson®

Direct OEM plug-and-play replacement for TSM/TSSM/HFSM on Harley-Davidson models; compatible with LED or incandescent bulbs, 0.24 A–6 A per side; 11 VDC–15 VDC.

€264.56 €332.45

-€67.89

CUSTOM DYNAMICS Turn Signal Module — Harley-Davidson

Direct OEM TSM/TSSM/HFSM plug-and-play replacement for Harley-Davidson models. Supports LED and incandescent bulbs (0.24–6 A per side). Manual and self-canceling operation, four-way hazards, automatic shutoff at >45° tilt, 11 VDC–15 VDC, built-in short and overcurrent protection.

€264.56 €332.45

Contact us

Products

Our company