Electrical & Ignition (3)

-€1.23

K&S TECHNOLOGIES Solderless Wire Connectors — White

Sealed solderless splices that melt with a heat gun for fast, watertight electrical connections. No soldering gun required.

€1.18 €2.41

-€6.71

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8 in), for Harley-Davidson®

Plug-and-play harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.08 €32.79

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — Harley-Davidson®

Direct plug-in adapter for rear fender swaps; connects to the OEM under-seat and rear lighting harnesses for plug-and-play installation.

€32.80 €41.24

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — for Harley-Davidson®

Plugs into the OEM harness under the seat and mates with the OEM rear lighting harness for plug-and-play swaps. No splicing required.

€32.80 €41.24

SMART Controller Brake Y-Harness — For Harley Davidson®, Black

-€6.82

CUSTOM DYNAMICS SMART Controller Brake Y-Harness — For Harley Davidson®, Black

Plug-and-play Y-harness that feeds brake signal to 3-wire (red non-sequential) lighting products for use with the Smart Turn Signal Controller and 1157 dual-color rear signals.

€26.55 €33.37

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 30.5 cm (12"), Black

Pre-cut lengths for easy extension of OEM throttle wires; color-matched Molex-terminated wiring; plug-and-play installation.

€27.74 €34.86

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 4" wire length, Harley Davidson®

Pre-cut, color-matched Molex-terminated leads for quick plug-and-play extension of OEM throttle-by-wire wiring during handlebar installs.

€27.74 €34.86

-€4.11

CUSTOM DYNAMICS Shark Demon® Single Lamp Wire Harness — SD2-UNV-HARN

Wire harness that connects the Shark Demon® headlight to vehicle high beam, low beam, and ground.

€15.99 €20.10

Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

-€6.68

CUSTOM DYNAMICS Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

Plug-and-play harness for easy Tour Pak® removal and reconnection.

€25.95 €32.63

-€2.03

CUSTOM DYNAMICS Run/Brake Taillight Adapter — For Harley-Davidson

Plug-and-play adapter for run and brake LED taillights. Compatible with Custom Dynamics and ProBEAM models (sold separately). Not compatible with integrated turn-signal taillights.

€7.86 €9.89

-€7.25

CUSTOM DYNAMICS Integrated Taillight Adapter — Harley Davidson®, TL-LRST-INT

Adapter for integrated LED taillights; provides running light, brake light and amber auxiliary turn signals. Plug-and-play installation.

€28.22 €35.47

-€2.16

K&S TECHNOLOGIES 12V Economy Horn — 12V, 69.9 mm, Black

Compact electric horn that adds style and safety and mounts almost anywhere.

€6.10 €8.26

-€2.14

K&S TECHNOLOGIES 12V Economy Horn — 69.9 mm (2-3/4"), Chrome

Add style and safety to your bike. Sized to mount almost anywhere.

€6.03 €8.17

-€11.64

CUSTOM DYNAMICS Ultra Tour-Pak® Run, Brake and Turn Signal Module — 12V

Plug-and-play conversion for Tour-Pak® lights to provide running, brake and turn functions. Works with LEDs only.

€35.05 €46.69

-€20.86

CUSTOM DYNAMICS Electromagnetic Dual Horn Kit — Black

Replaces factory horn with dual 109 dB low and high tone electromagnetic horns. Includes mounting bracket, wire harness and relay. Plug-and-play. IP65 rated.

€81.11 €101.97

Heat-Shrink Solderless Wire Connector Kit/Refill — 12-10, 16-14, 22-18, 26-24 AWG

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12-10,...

Solderless heat-shrink connectors in a refill kit—low-heat solder core and shrink tubing for watertight seals; packaged for easy counter handling.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit/Refill — 26–24 AWG, 100-pack, white

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 26–24 AWG,...

Solderless heat-shrink connectors that melt with a heat gun and form a watertight seal; refill packs are barcode-labeled for quick service-counter handling.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit/Refill — 16–14 AWG, 100 Pack, Blue

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 16–14 AWG,...

No soldering gun required; low-heat solder and heat-shrink tubing form watertight connections. Clear wide-mouth jar and bar-coded packs for easy handling at counter or service.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit — 100 Pack, 12-10 AWG, Yellow

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit — 100 Pack, 12-10...

Refill pack of wire connectors in a wide-mouth clear jar; low-heat solder melts with a heat gun for a watertight seal. Individually labeled packs with bar codes for easy counter handling.

€127.26 €187.95

Solderless Wire Connectors — 20 Pack, Blue

-€19.59

K&S TECHNOLOGIES Solderless Wire Connectors — 20 Pack, Blue

Tool-free wire connectors that form watertight, low-heat splices when activated with a heat gun.

€18.01 €37.60

Solderless Wire Connectors — 20-pack, yellow

-€19.59

K&S TECHNOLOGIES Solderless Wire Connectors — 20-pack, yellow

Create secure, moisture-resistant wire splices without a soldering gun using heat-activated solder and shrink tubing.

€18.01 €37.60

-€67.89

CUSTOM DYNAMICS Turn Signal Module — Harley-Davidson

Direct OEM TSM/TSSM/HFSM plug-and-play replacement for Harley-Davidson models. Supports LED and incandescent bulbs (0.24–6 A per side). Manual and self-canceling operation, four-way hazards, automatic shutoff at >45° tilt, 11 VDC–15 VDC, built-in short and overcurrent protection.

€264.56 €332.45

-€67.89

CUSTOM DYNAMICS Turn Signal Module — Harley-Davidson®, 11 V–15 V

Direct OEM TSM/TSSM/HFSM plug-and-play replacement; compatible with LED or incandescent bulbs (0.24 A–6 A per side).

€264.56 €332.45

-€67.89

CUSTOM DYNAMICS Turn Signal Module — Harley Davidson®, TSM-4

Direct OEM plug-and-play replacement; compatible with LED or incandescent bulbs (0.24 A–6 A per side), low current draw, 11 V–15 V.

€264.56 €332.45

-€6.84

CUSTOM DYNAMICS Running Light Load Harness — Fits '25 Softail models, Black

Replicates the OE headlight halo running light load for '25 Softail models to prevent BCM codes and retain factory lighting.

€19.25 €26.09

Hydraulic Brake Light Switch — 9.5 mm (3/8"), 3/8-24 thread, Chrome

-€8.27
Out of Stock

K&S TECHNOLOGIES Hydraulic Brake Light Switch — 9.5 mm (3/8"), 3/8-24 thread,...

Activates brake light with hydraulic pressure. Includes two washers and 19" long wires with terminals. Compact design.

€23.38 €31.65

-€1.22
Out of Stock

CUSTOM DYNAMICS Dual Signal Converter for Plasma Rods — 31 cm (12"), Black

Converts two-wire to three-wire for running-brake applications; easy inline installation and reliable performance.

€4.28 €5.50

-€16.71
Out of Stock

CUSTOM DYNAMICS Ultra Tour-Pak® Run, Brake and Turn Signal Module — 12 V

Plug-and-play module that converts Tour-Pak® lights to running, brake and turn signals. Works with LEDs only; increases rear and side visibility.

€47.15 €63.86

-€10.91
Out of Stock

CUSTOM DYNAMICS Wiring Adapter — 6-pin, for Harley-Davidson

Easy-to-install adapter for connecting run, brake, turn and ground wires.

€30.86 €41.77

Magic Strobes™ Brake Light Flasher — 12 V, 84 W, 12.7 × 57.2 × 31.8 mm

-€20.01
Out of Stock

CUSTOM DYNAMICS Magic Strobes™ Brake Light Flasher — 12 V, 84 W, 12.7 × 57.2 ×...

Slimline brake light flasher with 10 selectable patterns, sealed weather-tight case and plug-and-play installation.

€56.61 €76.62

Contact us

Products

Our company