Electrical & Ignition (3)

-€21.65

CUSTOM DYNAMICS Alternating Brake Strobe Module — Universal

Alternating left/right brake strobe effect.
10 selectable flash and strobe patterns.
Plug-and-play installation; compatible with add-on LED accessories.

€84.22 €105.87

Run/Brake/Turn Lighting Accessory Adapter — Black, For Harley Davidson®

-€9.09

CUSTOM DYNAMICS Run/Brake/Turn Lighting Accessory Adapter — Black, For Harley...

Converts run/brake accessories to run/brake/turn. Compatible with non-sequential single-color red LEDs. Separated brake wire lead. Plug-and-play installation.

€35.38 €44.47

-€28.51

CUSTOM DYNAMICS Horn Trigger Alternating Strobe Module — Harley-Davidson®, Black

Alternating left-to-right strobe while the horn is active.
Ten selectable flash and strobe patterns via dial.
Requires OEM front signals converted to low-current LEDs; plug-and-play.

€110.89 €139.40

-€2.87

CUSTOM DYNAMICS Push Button Switch — 3 pack, black

Single-pole push-button switch with waterproof boot for weather protection.

€10.09 €12.96

-€10.79

K&S TECHNOLOGIES Hydraulic Brake Light Switch/Banjo Bolts — 9.5 mm (3/8"), black

Banjo-style switch assembly with two included sealing washers for secure, leak-resistant installation.

€23.13 €33.92

Auxiliary Handlebar Mounted On/Off Switch — 12 VDC, fits 7/8", 1", 1-1/4" handlebars, Black

-€10.05

CUSTOM DYNAMICS Auxiliary Handlebar Mounted On/Off Switch — 12 VDC, fits 7/8",...

Handlebar-mounted on/off switch for auxiliary lights. Includes three rubber insulators, hardware, and 18 AWG 60" wire leads. Fits 7/8", 1" and 1-1/4" handlebars.

€39.09 €49.14

Auxiliary Handlebar Control Mounted On/Off Switch — Black, fits Harley-Davidson®

-€8.04

CUSTOM DYNAMICS Auxiliary Handlebar Control Mounted On/Off Switch — Black,...

On/off handlebar switch for auxiliary driving or accessory lights. Direct OEM clamp-half replacement. 18 AWG 60" wire leads. Simple two-wire hookup with hardware included.

€31.27 €39.31

-€7.14

K&S TECHNOLOGIES Snail-Type Universal Horn — Black, 11-0300

Powerful 105–118 dB horn; 80 mm diameter; wire extension included.

€17.50 €24.64

ProBEAST® Dual Tone Air Horn — Cover 5-7/8" x 5-3/4", Does not fit V-Rod, Black

-€80.81

CUSTOM DYNAMICS ProBEAST® Dual Tone Air Horn — Cover 5-7/8" x 5-3/4", Does not...

Direct replacement for Harley-Davidson® stock "cow bell" unit; 104.9 db rating; heavy duty bracket and ABS cover; plug-and-play harness included. Does not fit V-Rod.

€228.43 €309.24

-€12.69

K&S TECHNOLOGIES Universal Starter Relay — 12V

Universal starter relay kit with solenoid, brackets, extra terminal wires, blade fuses and mounting hardware for easy installation.

€35.86 €48.55

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

Superior connection compared to crimping. Wire ends lock between opposing cone shapes when hand tightened.

€9.86 €12.67

Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

Provides a superior alternative to crimping; locks wire ends between opposing cones when hand tightened for a secure mechanical connection.

€9.86 €12.67

-€2.19

CUSTOM DYNAMICS Wiring Cage Clamp — 3-pin, 20 A

Compact spring-clip connector for joining multiple wires; accepts up to five 24 AWG wires per port.

€6.70 €8.89

-€2.64

CUSTOM DYNAMICS Mini ATC Fuse Holder — 3 A, 5-pack, Black, Red

Waterproof-boot mini fuse kit with five holders and pre-installed 3 amp fuses.

€9.26 €11.90

-€4.85

CUSTOM DYNAMICS TruBEAM® Headlamp Adapter Harness — Fits H4

Required when replacing stock dual-halogen headlamps with an LED headlamp or any other H4-based headlamp. Provides plug-and-play connection.

€17.02 €21.87

Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10, 16–14, 22–18, 26–24 AWG, assorted colors

-€8.46

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10,...

No soldering gun required; low-heat solder activates with a heat gun to create a watertight shrink seal. Packs come in a clear jar with barcode-labeled packs for easy counter or service use.

€23.84 €32.30

Solderless Wire Connectors — 20-pack, White

-€19.59

K&S TECHNOLOGIES Solderless Wire Connectors — 20-pack, White

Solderless splices using low-heat solder that melts with a heat gun and creates a watertight shrink-tube seal.

€22.26 €41.85

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€6.71

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8 in), for Harley-Davidson®

Plug-and-play harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.08 €32.79

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — Harley-Davidson®

Direct plug-in adapter for rear fender swaps; connects to the OEM under-seat and rear lighting harnesses for plug-and-play installation.

€32.80 €41.24

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — for Harley-Davidson®

Plugs into the OEM harness under the seat and mates with the OEM rear lighting harness for plug-and-play swaps. No splicing required.

€32.80 €41.24

SMART Controller Brake Y-Harness — For Harley Davidson®, Black

-€6.82

CUSTOM DYNAMICS SMART Controller Brake Y-Harness — For Harley Davidson®, Black

Plug-and-play Y-harness that feeds brake signal to 3-wire (red non-sequential) lighting products for use with the Smart Turn Signal Controller and 1157 dual-color rear signals.

€26.55 €33.37

$Handlebar Extension Wire Kit — 20 cm (8\"), Harley-Davidson, Black$

-€7.77

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 20 cm (8\"), Harley-Davidson,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play handlebar extensions.

€30.19 €37.96

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 30.5 cm (12"), Black

Pre-cut lengths for easy extension of OEM throttle wires; color-matched Molex-terminated wiring; plug-and-play installation.

€27.74 €34.86

Contact us

Products

Our company