Electrical & Ignition (2)

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€28.93

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin connector, Black

Converts stock and custom signals into running and brake lights while maintaining turn signal function. Built-in load equalizer and plug-in connectors for easy installation.

€112.50 €141.43

Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x 7/8", Deutsch 8-pin

-€22.55

BADLANDS Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x...

Direct plug-in replacement; self-cancels after 11 seconds, manual cancel available. Built-in emergency flasher and LED load equalizer up to 100 W per side. Verify your bike's connector before purchase.

€87.69 €110.24

-€9.25

BADLANDS Turn Signal Load Equalizer™ II — 12 V

Restores correct amperage when aftermarket marker lights replace stock turn signals. Maintains emergency flasher function. Made in the USA. Not for parade use or extended idling.

€35.98 €45.23

-€24.30

BADLANDS Run, Brake and Turn Signal Module — 12V, Black

Converts turn signals into running and brake lights while keeping turn signal function; built-in load equalizer and easy instructions for straightforward installation.

€94.49 €118.79

-€7.63

BADLANDS Turn Signal Load Equalizer™ — 12 V

Restores amperage draw for aftermarket marker lights so self-canceling systems function properly. Made in the USA.

€29.67 €37.30

-€2.16

K&S TECHNOLOGIES 12V Economy Horn — 12V, 69.9 mm, Black

Compact electric horn that adds style and safety and mounts almost anywhere.

€6.10 €8.26

-€2.14

K&S TECHNOLOGIES 12V Economy Horn — 69.9 mm (2-3/4"), Chrome

Add style and safety to your bike. Sized to mount almost anywhere.

€6.03 €8.17

Heat-Shrink Solderless Wire Connector Kit/Refill — 12-10, 16-14, 22-18, 26-24 AWG

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12-10,...

Solderless heat-shrink connectors in a refill kit—low-heat solder core and shrink tubing for watertight seals; packaged for easy counter handling.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit/Refill — 26–24 AWG, 100-pack, white

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 26–24 AWG,...

Solderless heat-shrink connectors that melt with a heat gun and form a watertight seal; refill packs are barcode-labeled for quick service-counter handling.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit/Refill — 16–14 AWG, 100 Pack, Blue

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 16–14 AWG,...

No soldering gun required; low-heat solder and heat-shrink tubing form watertight connections. Clear wide-mouth jar and bar-coded packs for easy handling at counter or service.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit — 100 Pack, 12-10 AWG, Yellow

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit — 100 Pack, 12-10...

Refill pack of wire connectors in a wide-mouth clear jar; low-heat solder melts with a heat gun for a watertight seal. Individually labeled packs with bar codes for easy counter handling.

€127.26 €187.95

Solderless Wire Connectors — 20 Pack, Blue

-€19.59

K&S TECHNOLOGIES Solderless Wire Connectors — 20 Pack, Blue

Tool-free wire connectors that form watertight, low-heat splices when activated with a heat gun.

€18.01 €37.60

Solderless Wire Connectors — 20-pack, yellow

-€19.59

K&S TECHNOLOGIES Solderless Wire Connectors — 20-pack, yellow

Create secure, moisture-resistant wire splices without a soldering gun using heat-activated solder and shrink tubing.

€18.01 €37.60

Hydraulic Brake Light Switch — 9.5 mm (3/8"), 3/8-24 thread, Chrome

-€8.27
Out of Stock

K&S TECHNOLOGIES Hydraulic Brake Light Switch — 9.5 mm (3/8"), 3/8-24 thread,...

Activates brake light with hydraulic pressure. Includes two washers and 19" long wires with terminals. Compact design.

€23.38 €31.65

Plug-In Illuminator with Red Lenses — 12V, Red lenses, Harley Davidson®

-€29.18
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, Red lenses, Harley...

Greatly increases rear visibility with three running/brake lights while preserving turn signal function; fits rear OEM turn signal assemblies and plugs into the OEM wiring harness for quick installation.

€113.50 €142.68

Plug-In Illuminator with Red Lenses — Red lenses, 12V, Harley Davidson® fit

-€29.18
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — Red lenses, 12V, Harley...

Plug-in upgrade that adds three running/brake lights while retaining turn signal function; fits rear OEM turn signal assemblies and connects to the OEM wiring harness.

€113.50 €142.68

-€29.18
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, Harley Davidson®

Three running/brake lights, fits rear OEM turn signal assemblies, plug‑in installation.

€113.50 €142.68

-€27.39
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, for Harley Davidson®

Three running/brake lights while retaining turn signal function; lenses fit rear OEM turn signal assemblies; plugs into OEM wiring harness for quick installation.

€106.52 €133.91

Plug-In Illuminator with Red Lenses — 12V, 8-pin connector, fits Harley-Davidson®

-€28.95
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, 8-pin connector,...

Three running/brake lights that maintain turn signal function; fits rear OEM turn signal assemblies for quick plug-in installation.

€112.59 €141.54

Plug-In Illuminator with Red Lenses — 12V, Harley Davidson, OEM-style 6-pin

-€28.95
Out of Stock

BADLANDS Plug-In Illuminator with Red Lenses — 12V, Harley Davidson,...

Plug-In Illuminator with Red Lenses adds three running/brake lights, fits rear turn signal assemblies, and plugs into the factory wiring harness for quick installation.

€112.59 €141.54

-€27.39
Out of Stock

BADLANDS Run, Brake and Turn Signal Module — 12V, 12-pin connector

Converts stock or custom turn signals into running lights and brake lights while preserving turn signal function. Includes built-in load equalizer and plug-in connectors.

€106.52 €133.91

-€15.76
Out of Stock

BADLANDS Intensifier High-Low Module II — High/Low, 12V, 50W

Converts single-function bulbs into high-low dual-function lighting; works with turn signals, marker lights, neon accents and driving lights.

€61.33 €77.09

-€29.18
Out of Stock

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin connector

Converts turn signals into running and brake lights while maintaining turn function. Built-in load equalizer and plug-in connectors for select models. Made in the USA.

€113.50 €142.68

Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM-style connector

-€20.64
Out of Stock

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM-style...

Solid-state, waterproof load equalizer that eliminates erratic turn-signal blinking. One module required per pair of signals; plug-in installation.

€80.02 €100.66

Contact us

Products

Our company