Electrical & Ignition (2)

Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10, 16–14, 22–18, 26–24 AWG, assorted colors

-€8.46

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10,...

No soldering gun required; low-heat solder activates with a heat gun to create a watertight shrink seal. Packs come in a clear jar with barcode-labeled packs for easy counter or service use.

€23.84 €32.30

Solderless Wire Connectors — 20-pack, White

-€19.59

K&S TECHNOLOGIES Solderless Wire Connectors — 20-pack, White

Solderless splices using low-heat solder that melts with a heat gun and creates a watertight shrink-tube seal.

€22.26 €41.85

-€1.23

K&S TECHNOLOGIES Solderless Wire Connectors — White

Sealed solderless splices that melt with a heat gun for fast, watertight electrical connections. No soldering gun required.

€1.18 €2.41

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€38.92

DYNATEK 12 V Ignition Coil — Black

Industry-standard 12 V coil with 35,000 V spark energy; fits Dyna systems. Not for Twin Cam applications.

€151.34 €190.26

-€38.92

DYNATEK 12 V Ignition Coil — Green, pair

Industry-standard ignition coil with 35,000 V spark energy, compatible with Dyna ignition systems. Not for Twin Cam applications.

€151.34 €190.26

-€38.92

DYNATEK 12 V Ignition Coil — 35,000 V, Green

Industry-standard high-energy spark; fits Dyna ignition systems; made in the USA; not for Twin Cam applications.

€151.34 €190.26

-€22.89

DYNATEK-HARLEY Dual Output HD Coil 3 Ohm — 12V, 3.0 ohm, Green

Industry-standard dual-output coil for Dyna ignition systems. Not for Twin Cam applications. Made in the U.S.A.

€89.00 €111.89

-€36.28

DYNATEK-HARLEY Twin Fire II Miniature 3 Ohm Coil — 3.0 ohm, 12V, Black

Compact, sealed ignition coil offering high-voltage output and peak gap current over 50 mA. Made in the U.S.A.

€141.13 €177.41

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

Electronic Ignition System — Black, dual fire

-€27.46

DYNATEK-HARLEY Electronic Ignition System — Black, dual fire

Self-contained ignition system with Hall Effect sensors. Improves timing less than three degrees, extends plug life, and eliminates points and condensers. Easy to install; requires a 5 ohm aftermarket coil for use with Dyna S and is not recommended with OEM coils.

€106.82 €134.28

-€68.67

DYNATEK-HARLEY Ignition and Coil Kit — Black

Complete ignition and coil kit used by top racers; coils produce over 30,000 V. Housed Dyna S maintains factory advance curve. Not for fuel-injected models.

€267.02 €335.69

-€5.72

DYNATEK Universal 8 mm Suppression Plug Wire Kit — 48"

High-grade suppression core wires; two cut-to-length leads for up to four cylinders. Made in the U.S.A. Not for Twin Cam or '04-'15 XL.

€22.25 €27.97

-€2.16

K&S TECHNOLOGIES 12V Economy Horn — 12V, 69.9 mm, Black

Compact electric horn that adds style and safety and mounts almost anywhere.

€6.10 €8.26

-€2.14

K&S TECHNOLOGIES 12V Economy Horn — 69.9 mm (2-3/4"), Chrome

Add style and safety to your bike. Sized to mount almost anywhere.

€6.03 €8.17

Heat-Shrink Solderless Wire Connector Kit/Refill — 12-10, 16-14, 22-18, 26-24 AWG

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12-10,...

Solderless heat-shrink connectors in a refill kit—low-heat solder core and shrink tubing for watertight seals; packaged for easy counter handling.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit/Refill — 26–24 AWG, 100-pack, white

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 26–24 AWG,...

Solderless heat-shrink connectors that melt with a heat gun and form a watertight seal; refill packs are barcode-labeled for quick service-counter handling.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit/Refill — 16–14 AWG, 100 Pack, Blue

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 16–14 AWG,...

No soldering gun required; low-heat solder and heat-shrink tubing form watertight connections. Clear wide-mouth jar and bar-coded packs for easy handling at counter or service.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit — 100 Pack, 12-10 AWG, Yellow

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit — 100 Pack, 12-10...

Refill pack of wire connectors in a wide-mouth clear jar; low-heat solder melts with a heat gun for a watertight seal. Individually labeled packs with bar codes for easy counter handling.