Electrical & Ignition (11)

Replacement Rear Fender Harness — Fits Harley-Davidson, Molex connector

-€11.14

NAMZ Replacement Rear Fender Harness — Fits Harley-Davidson, Molex...

OEM-style, color-coded rear fender wiring harness. Simple installation; made in USA.

€33.41 €44.55

15" Speedometer and Instrument Extension Harness — 38 cm (15")

-€8.48

NAMZ 15" Speedometer and Instrument Extension Harness — 38 cm (15")

Easily extends stock speedometer and indicator wiring 15" for riser installations; pre-terminated male and female terminals, includes heat shrink.

€25.44 €33.92

-€9.02

NAMZ Replacement Electrical Power Connection

OEM replacement electrical power connection for navigation, audio, heated grips or charging port. Supplies ground, switched and 12+ battery power without CAN/Bus interference.

€27.03 €36.05

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

Rear Fender Foam Loom — 18" (45.5 cm), 2-pack, Black

-€8.48

NAMZ Rear Fender Foam Loom — 18" (45.5 cm), 2-pack, Black

Replacement rear fender foam loom with pre-applied adhesive tape for quick, low-profile OEM replacement.

€25.44 €33.92

Front Turn Signal Tap Harness — Harley-Davidson

-€17.78

NAMZ Front Turn Signal Tap Harness — Harley-Davidson

Plug-and-play harness for adding an additional front turn signal. Made in the USA.

€53.33 €71.11

Front Turn Signal Tap Harness — For Harley-Davidson

-€17.78

NAMZ Front Turn Signal Tap Harness — For Harley-Davidson

Front turn signal tap for adding an additional front signal
Plug-and-play installation, no cutting required
Made in the USA

€53.33 €71.11

-€17.78

NAMZ Front Turn Signal Tap Harness — Harley-Davidson®

Plug-and-play harness to add an extra front turn signal. Made in the USA. Easy installation.

€53.33 €71.11

-€17.35

NAMZ Front Turn Signal Tap Harness — Harley-Davidson®

Plug-and-play tap harness for adding an extra pair of front turn signals. Made in the USA.

€52.03 €69.38

Passing Lamp Control Harness — Harley-Davidson

-€9.02

NAMZ Passing Lamp Control Harness — Harley-Davidson

Allows use of passing lamps while high beam is on; plug-and-play installation.

€27.07 €36.09

Rear Fender Lighting Harness — For Harley-Davidson®

-€16.37

NAMZ Rear Fender Lighting Harness — For Harley-Davidson®

Plug-n-play harness for adding rear lighting without cutting factory wires.

€49.08 €65.45

-€22.29

NAMZ Tour-Pak Wiring Installation Kit — Harley Davidson®

Complete wiring installation kit for Street Glide and Road Glide; plug-and-play harness with quick-disconnect for easy removal.

€66.85 €89.14

-€22.27

NAMZ Tour Pack Retrofitting Wiring Kit — Harley-Davidson®

Complete wiring kit to retrofit 2014-up Tour Pack. Plug-n-play harness with quick-disconnect for easy removal.

€66.81 €89.08

-€22.27

NAMZ Tour Pack Retrofitting Wiring Kit — Harley Davidson®

Complete wiring kit for retrofitting a 2014-up Tour Pack; plug-and-play harness with quick-disconnect for easy removal.

€66.81 €89.08

-€22.27

NAMZ Tour Pack Retrofitting Wiring Kit — For Harley-Davidson®

Complete wiring kit for retrofitting a 2014-up Tour Pack. Plug-n-play harness with quick-disconnect for easy removal. Includes connectors for lights and power.

€66.81 €89.08

-€8.48

NAMZ Tri-Bar Eliminator Harness — Wire harness, taillight

Retains the OEM rear fender and rear turn signal bar while eliminating the fender tip tri bar light. 100% plug-n-play.

€25.44 €33.92

-€6.71

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8 in), for Harley-Davidson®

Plug-and-play harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.08 €32.79

-€4.08

NAMZ OBD Connector Kit — 2021-up OBD-II fit, male (red)

Male (red) connector and terminal kit for 2021-up OBD-II ports, for quick, secure repairs.

€12.25 €16.33

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — Harley-Davidson®

Direct plug-in adapter for rear fender swaps; connects to the OEM under-seat and rear lighting harnesses for plug-and-play installation.

€32.80 €41.24

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — for Harley-Davidson®

Plugs into the OEM harness under the seat and mates with the OEM rear lighting harness for plug-and-play swaps. No splicing required.

€32.80 €41.24

SMART Controller Brake Y-Harness — For Harley Davidson®, Black

-€6.82

CUSTOM DYNAMICS SMART Controller Brake Y-Harness — For Harley Davidson®, Black

Plug-and-play Y-harness that feeds brake signal to 3-wire (red non-sequential) lighting products for use with the Smart Turn Signal Controller and 1157 dual-color rear signals.

€26.55 €33.37

-€5.40

NAMZ Front ABS Extension Harness — 12" (30.5 cm), Black

Front extension harness for ABS applications. 100% plug-n-play; no splicing required.

€16.22 €21.62

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 30.5 cm (12"), Black

Pre-cut lengths for easy extension of OEM throttle wires; color-matched Molex-terminated wiring; plug-and-play installation.

€27.74 €34.86

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 4" wire length, Harley Davidson®

Pre-cut, color-matched Molex-terminated leads for quick plug-and-play extension of OEM throttle-by-wire wiring during handlebar installs.

€27.74 €34.86

Contact us

Products

Our company