Body & Frame

-€72.29
Out of Stock

RIVCO PRODUCTS [object Object]

Durable steel bumper engineered for Tri-Glide models; compatible with Rivco's optional Flag Socket Holder. Powder-coated finish and easy OEM installation.

€281.14 €353.43

-€14.40
Out of Stock

DRAG SPECIALTIES [object Object]

Kickstand Wedge Kit by Don Hotop. Adjusts kickstand angle at the frame for bikes lowered up to 2". Maintains foot board angle. 6061 billet aluminum construction. Includes fine- and coarse-thread bolts and installation instructions.

€40.72 €55.12

Gas Cap with Paint Protectors — Left-hand thread, screw on, non-vented, Chrome

-€19.05
Out of Stock

DRAG SPECIALTIES Gas Cap with Paint Protectors — Left-hand thread, screw on,...

Low-profile gas cap with screw-in paint protectors and included installation tool. Ratchet-action cap for secure closure.

€53.84 €72.89

-€73.14
Out of Stock

COBRA [object Object]

Chrome-plated bolt-on bumper with laser-cut brackets for a precise, OEM-style fit on Freewheeler trikes.

€284.42 €357.56

-€12.35
Out of Stock

DRAG SPECIALTIES Gas Cap with Paint Protectors — Chrome, Dummy

Replaces OEM fuel gauge in tanks with the fuel gauge on the left side; protects paint around the filler and provides a clean, factory appearance.

€34.91 €47.26

-€44.36
Out of Stock

DRAG SPECIALTIES Fat Bob Rear Fender — 30-1/2" contour, 7-1/4" width, Unfinished

Raw steel rear fender; available pre-drilled for OEM struts or undrilled for custom installs; includes taillight/license mount.

€125.35 €169.71

-€1.64
Out of Stock

KURYAKYN Flush-Mount Gas Cap Replacement Key — Black

Replacement key for flush-mount gas caps. Precision-cut for reliable operation and easy use.

€6.36 €8.00

-€38.02
Out of Stock

DRAG SPECIALTIES Steel Front Fender — 16.00" wheel, front, unfinished

Smooth-sided steel front fender with no rivets; fits FLSTF front ends with 16" wheels. Sold each.

€107.44 €145.46

-€5.37
Out of Stock

DRAG SPECIALTIES Screw-In Locking Gas Cap — Vented, Chrome

Locking screw-in gas cap with swing-away cover to protect the lock and two keys included.

€15.18 €20.55

-€7.50
Out of Stock

DRAG SPECIALTIES Screw-In Locking Gas Cap — Chrome, Non-vented

Locking screw-in gas cap with swing-away cover; includes two keys.

€21.22 €28.72

-€20.24
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock length fits lowered suspension. Measured from the first bend top to bottom for Big Twin, Softail, FLT and XL.

€57.20 €77.44

-€7.50
Out of Stock

DRAG SPECIALTIES Fuel Cap — Chrome, Non-vented

Locking screw-in gas cap deters theft; includes swing-away cover and two keys.

€21.22 €28.72

-€1.85
Out of Stock

DRAG SPECIALTIES [object Object]

Durable kickstand spring measured from hook to hook for correct fit. Easy to install.

€5.23 €7.08

Pop-Up Gas Cap — 59.90 mm (2.36 in) outside diameter, pop-up mounting, Chrome

-€12.20
Out of Stock

DRAG SPECIALTIES Pop-Up Gas Cap — 59.90 mm (2.36 in) outside diameter, pop-up...

Billet aluminum pop-up fuel cap that sits nearly flush and opens with a quarter-turn. Use an OEM-style gasket for a secure seal.

€34.48 €46.68

-€5.38
Out of Stock

DRAG SPECIALTIES [object Object]

Low-profile kickstand extension that eases operation; includes mounting hardware. Drilling required.

€15.22 €20.60

-€125.78
Out of Stock

KLOCK WERKS WFB™ Benchmark Rear Fender — 7-1/8" wide, E-coated

Stamped 14-gauge construction with deep-draw forming for a flawless fit; direct replacement; mounting hardware included.

€489.11 €614.89

Pop-Up Gas Cap — 59.9 mm (2.36"), Chrome

-€13.06
Out of Stock

DRAG SPECIALTIES Pop-Up Gas Cap — 59.9 mm (2.36"), Chrome

Billet aluminum pop-up gas cap. Nearly flush when closed; opens with a quarter-turn. Use an OEM-style gasket for a positive seal.

€36.92 €49.98

-€1.25
Out of Stock

DRAG SPECIALTIES [object Object]

Durable kickstand spring measured from hook to hook for accurate fit. Easy to install.

€3.55 €4.80

WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel, Black, E-Coating

-€75.46
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel, Black,...

Stamped 14-gauge U.S. steel front fender with E-coating, pre-drilled fitment, rivetless sides and extended rear tail; pairs with WFB™ rear fender.

€293.45 €368.91

-€5.38
Out of Stock

DRAG SPECIALTIES [object Object]

Increases kickstand contact area for easier operation; includes mounting hardware. Drilling required.

€15.22 €20.60

WFB™ Benchmark Front Fender — 6-1/2" fender, fits 16"/17"/18"/19" wheels, black

-€75.46
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" fender, fits...

Stamped 14-gauge U.S. steel, E-coated to resist rust; pre-drilled, rivetless smooth sides, extended 1.5" rear tail. Pairs with WFB™ rear fender. Made in the USA.

€293.45 €368.91

-€19.73
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement. Under-stock length for lowered suspension. Measured from first bend to first bend on Big Twin, Softail, FLT and XL.

€55.77 €75.50

-€13.39
Out of Stock

DRAG SPECIALTIES Pop-Up Gas Cap — 59.90 mm (2.36") , Black

Billet aluminum pop-up gas cap that fits nearly flush and opens with a quarter-turn. Uses OEM-style gasket for a secure seal.

€37.84 €51.23

-€17.29
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units. Available in under-stock length for lowered suspension; for Big Twin, Softail, FLT and XL measure from the first bend to the first bend.

€48.89 €66.18

-€17.29
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units, with under-stock length options for lowered suspension. Measure Big Twin, Softail, FLT and XL from bend to bend.

€48.89 €66.18

Hugger Series Front Fender — 21" wheel, 5-15/16" outside mounting width

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21" wheel, 5-15/16" outside...

Steel front fender adds rigidity, comes stamped and pre-drilled for a consistent finish, resists corrosion; mounting blocks sold separately.

€293.45 €368.91

Hugger Series Front Fender — 21", 45" contour, 5-7/8" width, E-Coating

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21", 45" contour, 5-7/8" width,...

Adds front-end rigidity and Kustom styling. Stamped, pre-drilled for consistent fit and minimal body work. Protective coating resists corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Tire Hugger Front Fender for Dresser — Fits 16–19" wheels, 6-1/4" width, Black E-coating

-€75.46
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16–19" wheels,...

Stamped 14‑gauge steel front fender with 13‑step e-coated finish; laser cut, pre-drilled, includes mounting hardware. Made in the USA.

€293.45 €368.91

-€17.72
Out of Stock

DRAG SPECIALTIES [object Object]

Durable high-strength steel kickstand — direct OEM replacement with optional under-stock length for lowered bikes. Measured per model specifications.

€50.11 €67.83

Tire Hugger Front Fender for Dresser — Black E-coating, 21" wheel, 5-11/16" inside mount

-€75.46
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Black E-coating, 21"...

Stamped 14‑gauge steel front fender with 13‑step e-coating; laser cut and pre-drilled, includes mounting blocks and hardware.

€293.45 €368.91

shop by category

Body & Frame

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame